Mud flaps are not just an accessory, but an important element of body protection ŠKODA Octavia A7It prevents damage from dirt, stones and reagents. Owners of this model often face the problem of corrosion on the rapids and arches of the rear wheels, especially in winter. Properly selected mud flaps not only prolong the life of the paint coating, but also improve the appearance of the car, giving it a complete look.

In this article we will look at which mudguards are suitable for Octavia A7 (including restyled versions), what materials they are made of, how to install them with your own hands and what to look for when buying. You will also find reviews of real owners, price comparisons and tips for care. If you are just planning a purchase or have already faced a choice, there is all the necessary information to make an informed decision.

Why do you need mud flaps on the ŠKODA Octavia A7?

Many car owners underestimate the role of mud flaps, considering them a purely decorative element. However, their main function is protection of the body from mechanical damage and corrosion. During the movement of the wheels lift from the road small stones, sand and chemical agents that hit the bottom of the doors, rapids and arches. Without protection, this results in:

  • 🔹 Chips and scratches on paintwork, which will rust over time.
  • 🔹 Corrosion of thresholds and archesEspecially in the areas of micro-cracks and cracks.
  • 🔹 Damage to plastic elements bumper and slats from the impact of gravel.
  • 🔹 Deterioration of appearance It is caused by contaminants that are difficult to clean.

It is especially important to install the squirrels for Octavia A7 in Russian conditions: bad roads, abundant reagents in winter and frequent temperature changes accelerate the wear of the body. For example, the owners note that after 2-3 years of operation without protection on the thresholds appear the first rust foci, and the arches begin to "bloom". Sprayers take the main blow, keeping the factory coating intact.

⚠️ Attention: On restyled versions Octavia A7 (2017+) the shape of the rear arches has been slightly changed. Make sure the mud flaps you choose are compatible with your modification – versatile models may not be suitable!

Types of mudguards: what are they and how are they different?

All mud flaps for ŠKODA Octavia A7 It can be divided into two main criteria: material of manufacture and design. Their protective properties, durability and price depend on this. Let's look at each type in more detail.

By material

  • 🔹 Rubber (EPDM) It is the most common and budget option. It is resistant to temperature changes, does not crack in the cold, but over time it can lose elasticity. Suitable for daily use.
  • 🔹 Plastic (polyurethane, ABS) - Harder rubber, better shape, but can break when hit hard. It is often used in premium models with chrome inserts.
  • 🔹 Thermoplastic elastomer (TPE) - modern material combining the flexibility of rubber and the strength of plastic. It is more expensive, but it lasts longer and does not lose its properties at extreme temperatures.
  • 🔹 Aluminum or steel - are rare, usually in tuning sets. They require anti-corrosion treatment, but they look stylish.

By design

Mudguards for Octavia A7 are divided into:

  • 🔹 Front - are installed on the front wheel arches, protect the bumper and the lower part of the doors.
  • 🔹 Rear Close the back arches and rapids, where corrosion most often begins.
  • 🔹 Universal Suitable for all wheels, but may require fitting.
  • 🔹 Sports - with an aggressive design, often with additional rigidity ribs.
Material Service life Frost resistance Price (set) Top brands
Rubber (EPDM) 3-5 years ✅ It doesn't crack to -40°C. 1 500 — 3 000 ₽ Heko, Polcar, Sidem
Plastic (ABS) 4-7 years ⚠️ It can break at -25°C. 2 500 — 5 000 ₽ EGR, Febi, Topran
Thermoplastics (TPE) 5-8 years ✅ It's −50°C. 4 000 — 7 000 ₽ Heyner, Wings
Aluminum 7+ years ✅ Not afraid of frost. 8 000 — 15 000 ₽ Rieker, Tuning kits

Important: For Octavia A7 with factory protection of the wings (option) 3L0 805 001) only spray-mounted vents will fit. Check if this option is available in your package!

📊 Which mudguards do you prefer?
  • Rubber (cheap and practical)
  • Plastic (hard and stylish)
  • Thermoplastics (durable)
  • Aluminum (premium)

How to choose mud flaps for the ŠKODA Octavia A7: step-by-step instructions

Choosing mud flaps is not as easy as it seems. Not only design, but also technical nuances must be taken into account. Here is an algorithm that will help you not to be wrong:

  1. Determine the year of manufacture and modification yours Octavia A7. pre-facelift (2013–2016) and restyle (2017–2020) have different shapes of arches. For example, the restyle rear arches are wider by 15 mm.
  2. Check the contents. If you have factory-made slats, look for mud flaps with mounts under them (usually marked as "with optional" 3L0").
  3. Select material Based on climate:
    • For cold regions (Siberia, North) thermoplastics (TPE).
    • For a temperate climate, rubber (EPDM) Or plastic.
    • For tuning, aluminum Or plastic with chromium.
  • Pay attention to the fastening. It is optimal if the mud flaps are attached to regular places without drilling. For example, Heko and Polcar There are models with clips for the original holes.
  • Check the certificates.. Quality Sprayers Must Have Certificate of Conformity ECE R10 (European safety standard).
  • If you are in doubt about the choice, pay attention to the popular models:

    • 🔹 Heko Mudflap Set - universal rubber mud flaps with good protection and simple installation.
    • 🔹 Polcar Premium plastic with metal inserts, suitable for facelift.
    • 🔹 Heyner Aero Thermoplastic, with aerodynamic shape to reduce noise.
    ⚠️ Attention: Cheap mud flaps without a brand are often made of secondary rubber, which cracks after a year. Target proven manufacturers, even if the price is 20-30% higher.

    ☑️ What to check before buying?

    Done: 0 / 5

    Installation of mud flaps on the ŠKODA Octavia A7: a step-by-step master class

    Install mudguards on Octavia A7 You can do it yourself in 1-2 hours, even without experience. The main thing is to follow the instructions and not rush. You'll need:

    • 🔧 Set of screwdrivers (phillips, flat).
    • 🔧 10 mm key (for some models).
    • 🔧 Silicone grease (for rubber seals).
    • 🔧 Marker or masking tape (for marking).

    Step 1. Preparing the car

    Lift the car on the jack or drive to the observation pit. Clean the mounting places of dirt and treat them WD-40If the bolts are sour. Remove the wheels (optional, but will make it easier to access).

    Step 2. Dismantling old mudguards (if any)

    If on your Octavia A7 already stand mud flaps, carefully remove them, unscrewing the bolts or pulling out clips. They're usually attached:

    • 🔹 On the front arches - 2 bolts + 2 clips.
    • 🔹 On the rear arches - 3 clips + screw.

    Step 3. Installing new mudguards

    1. Try the mud flap on to the arch, making sure the holes match.
    2. Apply silicone lubrication to rubber seals (if they are included).
    3. Secure the mud flap, starting with the top bolts, then fix the clips.
    4. Check that there are no gaps between the mud flap and the body more than 2-3 mm.

    Step 4. Check

    After installation, scroll the wheels and make sure the mud flaps don't rub against the tires. If necessary, bend them or adjust the fasteners.

    What to do if the mud flaps are not suitable?

    If the holes do not match, you can carefully drill new ones (only in plastic underplates!). For rubber mud flaps, sometimes heating with a hairdryer helps - they become more elastic and sit better on the arch.

    Video instructions (if visualization is required):

    There are detailed videos on YouTube for installation, for example, from the channel. "Skoda Club Russia". Search by request Octavia A7 Spray Installation.

    💡

    Before installation, treat the attachment sites with anticores (for example, Molykote or Dinitrol). This will prevent rust under the bolts.

    Review of the best spray manufacturers for the Octavia A7

    There are many brands on the market, but not all are equally reliable. We analyzed the feedback of the owners. Octavia A7 We have selected the top 5 manufacturers that deserve attention.

    1. HEKO (Germany)

    Pros:

    • 🔹 Perfect landing on Octavia A7 (There are models for pre-facelift and restyle).
    • 🔹 The material is high-quality EPDM, does not tan in the cold.
    • 🔹 Simple editing without any further work.

    Cons: The price is higher than average (from 3,500 rubles per set).

    2. Polcar (Poland)

    Pros:

    • 🔹 The optimal price/quality ratio (from 2,200 rubles).
    • 🔹 There are models with metal inserts for premium appearance.
    • 🔹 Suitable for versions with factory underwings.

    Cons: Plastic can crack in severe frosts (-30 ° C and below).

    3. Heyner (Germany)

    Pros:

    • 🔹 Thermoplastic spray with aerodynamic shape (reduce noise).
    • 🔹 3 year warranty.
    • 🔹 All the necessary fastening elements are included.

    Cons: Expensive (from 6000 rubles), but justify the price by durability.

    4. EGR (Italy)

    Pros:

    • 🔹 Stylish design, there are options for body color.
    • 🔹 Good protection from dirt due to the increased width.

    Cons: Require fitting during installation (may need a drill).

    5. Sidem (France)

    Pros:

    • 🔹 Budget option (from 1,800 rubles) with decent quality.
    • 🔹 Suitable for most modifications Octavia A7.

    Cons: Rubber loses elasticity over time.

    Brand Average price (set) Material Warranty Owner rating
    HEKO 3 500 — 5 000 ₽ EPDM 2 years 4.9/5
    Polcar 2 200 — 3 500 ₽ Plastic/rubber 1 year 4.7/5
    Heyner 6 000 — 8 000 ₽ TPE 3 years 4.8/5
    EGR 4 000 — 6 000 ₽ Plastic 1 year 4.5/5
    Sidem 1 800 — 2 500 ₽ Rubber 6 months 4.2/5
    💡

    If you live in a region with harsh winters, give preference to brands. HEKO or Heyner Their materials withstand extreme temperatures.

    Owner reviews: real operating experience

    To make an objective opinion, we collected feedback from owners. ŠKODA Octavia A7 From different forums (Drive2, Skoda-Club, Drom). Here's what they say:

    Positive Feedback

    • 🔹 Alexey, Moscow, Octavia A7 1.8 TSI 2015:
      "Put HEKO Two years ago, not a single scratch on the doorsteps! The rubber is soft, it doesn't smack in winter. The installation took 40 minutes, everything was infused.
    • 🔹 Igor, Yekaterinburg, Octavia A7 2.0 TDI 2018:
      "I took Polcar Premium with chrome inserts. It looks cool, and most importantly, the rear arches remained clean even after winter. I recommend it!

    Negative reviews

    • 🔹 Dmitry, Novosibirsk, Octavia A7 1.6 MPI 2014:
      “I bought cheap mud flaps without a brand – a year later cracked. I had to change it. Heyner, it's all right now.
    • 🔹 Sergey, Kazan, Octavia A7 RS 2017:
      "Installed EGRBut I had to rework the mounts - the holes did not match. I'm happy with the rest.

    Tips from experienced owners

    • 🔹 Before winter treat the mud flaps with silicone lubricant - this will prevent the dirt from freezing.
    • 🔹 When washing Do not direct the jet of water under pressure on the mounts - clips can break.
    • 🔹 If the mud flaps start creaking, lubricate their back side with graphite lubricant.

    Care and operation: how to extend the life of mudguards?

    Even the best quality mud flaps will last longer if you care for them properly. Here are some tips:

    1. Cleaning

    Wash the mud flaps along with the body, but avoid aggressive detergents (such as acid). For rubber models, use waxed shampoo – it protects against drying. Plastic mud flaps can be cleaned with a soft brush with auto shampoo.

    2. Protection from frost

    Before winter, treat rubber mud flaps silicone spray (for example, Liqui Moly Silicon-Spray). This will prevent cracking and freezing to the body. Plastic models in severe frosts (-30 ° C and below) it is better not to touch with your hands - they become fragile.

    3. Checking the fasteners

    Check the condition of clips and bolts every 10,000 km. If you notice backlash, tighten the mounts or replace the clips (they cost a penny). Weakened mud flaps not only protect worse, but can also fall off on the go.

    4. Protection against UV rays

    If the car is often in the sun, rubber mud flaps can burn out and lose elasticity. Use it. UV protective sprays (for example, Sonax Gummi-Pflege) or park in the shade.

    ⚠️ Attention: Do not use gasoline, solvents or abrasives for cleaning mud flaps! They destroy the structure of rubber and plastic, reducing the service life by 2-3 times.

    Frequently asked questions (FAQ)

    Can I install mud flaps on the Octavia A7 without drilling?

    Yes, most of the models from HEKO, Polcar and Heyner They are attached to the regular holes without additional drilling. The exception is some tuning options.

    What mudguard material is best for winter?

    Optimal for cold climates Thermoplastic Elastomer (TPE) ore-tyre EPDM. They do not crack in the cold and remain flexible at -40°C.

    How much do the octavia A7 cost?

    The price depends on the material and brand:

    • 🔹 Budget (rubber, rubber, Sidem) — 1 800–2 500 ₽.
    • 🔹 Middle segment (Polcar, EGR) — 3 000–5 000 ₽.
    • 🔹 Premium (HEKO, Heyner) — 5 000–8 000 ₽.
    Can mudguards be painted to match the body color?

    Yes, plastic mud flaps can be painted with car paint after primer. Rubber paint is not recommended - the paint will quickly peel off. It is better to choose a model with factory coloring (for example, Polcar there are color options Octavia A7).

    How often should mudguards be replaced?

    Service life depends on the material and operating conditions:

    • 🔹 Rubber is 3-5 years old.
    • 🔹 Plastic is 4-7 years old.
    • 🔹 Thermoplastics (TPE) – 5-8 years.

    Signs for replacement: cracks, detachment of fasteners, loss of shape.