Škoda Yeti is a compact crossover that has gained popularity due to its reliability and practicality. But even such a car has “weak points”, and one of them is wipers. Over time, the brushes wear out, begin to creak, do not clean the glass well, or stop working altogether. In this article we will look at everything you need to know about wipers for Yeti: from choosing original and analog brushes to step-by-step replacement and troubleshooting typical faults.

The material will be useful for both beginners and experienced car owners. We won’t just list the articles, we’ll explain Why do some janitors last a year and others only a month?, how to avoid damage to the windshield and what to do if the wipers “freeze” in winter. You will also find Unique data on the compatibility of brushes for restyled and pre-facelift versions Yeti (2009–2017), which are not in standard catalogs.

Dimensions and articles of wipers for Škoda Yeti: original vs analogues

The first thing to start with is this correct brush sizes. For Škoda Yeti (all generations, including 2013 facelift) standard wiper sizes:

  • 🚗 Driver's wiper: 600 mm (24 inches)
  • 🚗 Passenger wiper: 400 mm (16 inches)
  • 🚗 Rear wiper (if installed): 300–350 mm (depending on the configuration)

Original brushes from Škoda are supplied under article numbers:

  • 🔧 5E1 955 425 A - driver's (left)
  • 🔧 5E1 955 426 A — passenger (right)
  • 🔧 5E5 955 501 — rear (for versions with rear wiper)

However, the original wipers are often criticized for the high price (from 1,500 to 2,500 rubles). for the set) and short service life. Alternative – analogues from proven brands:

Brand Article number (driver/passenger) Price (set), rub. Features
Bosch Aerotwin A337H / A193H 1 200–1 500 Frameless, graphite coated, quiet
HELLA EcoWind HW600 / HW400 800–1 000 Budget option, frame, medium resource
Denso Hybrid DU-600 / DU-400 1 400–1 700 Hybrid design, icing resistant
Valeo Silencio X-TRM 600155 / 400155 1 600–1 900 Premium segment, silent, long service life

⚠️ Attention: On restyled Yeti (after 2013) sometimes installed wipers with fastening Top Lock instead of standard Hook. Before buying, check the type of mounting on your car!

📊 Which wipers do you prefer for the ŠKODA Yeti?
  • Original (Škoda/VW)
  • Bosch Aerotwin
  • Denso Hybrid
  • HELLA or other budgetary
  • I don't know which ones are better

How to change wipers on Škoda Yeti: step-by-step instructions

Replacing windshield wiper blades with Yeti A simple procedure that takes no more than 10 minutes. You will need only a new set of wipers and a flat screwdriver (for the rear janitor).

The procedure for front wipers:

  1. Raise the janitor lever perpendicular to the glass (in the position of "service").
  2. Press the fixture (usually located at the bottom) and move the brush down.
  3. Remove the old brush and install a new one by snapping the lock.
  4. Lower the lever back onto the glass.

For the rear janitor, the process is similar, but it may be necessary to remove the plastic lining on the trunk door. Important: Do not apply force when removing - if the brush does not respond, check if you pressed the lock correctly.

Parking the car on a flat surface

Turn off the ignition and remove the key.

We're raising the janitors' levers to service position.

Check the compatibility of new brushes with fastening.

⚠️ Attention: Never turn on the wipers if they are ice or snow. This can lead to breakage of the motor or levers. In winter, before using, clean the brushes of ice manually.

What to do if the locker of the janitor is not pressed?

If the fixator doesn't respond, it may be rusted or contaminated. Treat it with WD-40 or similar lubrication, wait 5-10 minutes and try again. If this does not help, gently attach the lock with a flat screwdriver, but do not apply excessive force so as not to break the mount.

Typical wiper malfunctions and how to fix them

Wipers on Škoda Yeti may fail for various reasons. Let's look at the most common problems and ways to solve them.

1. The janitors squeak or twitch

  • 🔍 Reason: Wear rubber bands, contamination of glass or brushes.
  • 🛠️ Solution: Clean the glass and brushes with alcohol or a special cleaner. If you have left the creak, replace the brushes.

2. Dictators do not clean the glass (leave the divorces)

  • 🔍 Reason: Pollution or wear of rubber, the wrong angle of fit.
  • 🛠️ Solution: Wash the brushes in warm water with soap. If it doesn’t help, adjust the angle of the lever or replace the brushes.

3. The janitors work slowly or stop.

  • 🔍 Reason: Motor wear, contact oxidation or gearbox breakdown.
  • 🛠️ Solution: Check the fuse F30 (10A) in the fuse block. If the fuse is intact - diagnose the motor (article) 5E1 955 119).

4. Djanitors 'stick' in winter

  • 🔍 Reason: Ice on the brushes or levers.
  • 🛠️ Solution: Use winter brushes with a cover or treat rubber with silicone lubricant. Before parking, raise the wipers in a vertical position.
💡

If wipers began to "jump" when working, check the attachment of levers to the shaft. Often the problem is solved by lifting the nuts of the attachment (key to 13).

How to extend the service life of wipers on Škoda Yeti

The average service life of windshield wiper blades is 6–12 months, but with proper care this period can be increased by 1.5–2 times. Here are some proven tips:

  • 💧 Regular cleaning: Wash your brushes and glass special cleaner (for example, Liqui Moly Scheiben-Reiniger) at least once a month.
  • ❄️ Winter preparation: Treat your tires before frost silicone grease (for example, WD-40 Specialist Silicone).
  • 🅿️ Parking: In the heat, park your car in the shade - UV rays destroy the rubber of the brushes.
  • 🔧 Pressure check: The janitor's levers should fit tightly to the glass. If the pressure is weak, adjust the springs of the levers.

⚠️ Attention: Do not use wipers to clean glass from leaves, snow or ice – this leads to premature wear of rubber. First, remove the large garbage manually!

💡

The most common mistake of car owners is the use of wipers on dry glass. This reduces the life of brushes 3-4 times! Always turn on the washer before the cleaning service.

Rear wiper ŠKODA Yeti: features and replacement

Not all versions Škoda Yeti They are equipped with a back wiper - it was installed in complete sets Ambition, Style and L&K. Rear brush size - 300–350 mm, depending on the year of manufacture.

Articles of the original back wipers:

  • 🔧 5E5 955 501 - for models up to 2013
  • 🔧 5E5 955 501 A - for restyled versions (after 2013)

Replacing the rear wiper is more difficult than the front ones, as it requires removing the plastic lining on the trunk door. Algorithm of actions:

  1. Open the trunk door and remove the plastic lining (carefully pulling it with a screwdriver).
  2. Unscrew the nut of the mounting lever of the janitor (key to 10).
  3. Remove the lever and replace the brush (similar to the front wipers).
  4. Reassemble everything in reverse order.

⚠️ Attention: When removing the trunk lining, be careful - under it there are wires heating the glass. Don't hurt them!

Modernization of wipers: is it worth installing frameless brushes?

Many owners Škoda Yeti are considering installing frameless wipers (for example, Bosch Aerotwin or Valeo Silencio). The advantages of this solution:

  • ✅ Better aerodynamics (less noise at high speeds)
  • ✅ More uniform fit to the glass.
  • ✅ They serve longer in winter conditions.

However, there are also disadvantages:

  • ❌ High price (in 1.5-2 times more expensive than frame).
  • ❌ It is more difficult to find the right size for the back janitor.
  • ❌ They may be worse off with heavy snow.

If you decide to switch to frameless brushes, choose models with anchorage Hook 9x3 This is a standard mounting for Yeti. Before buying, check the compatibility with the manufacturer's table.

💡

For the test before buying frameless wipers, try to borrow a kit from a friend for 1-2 weeks. This will help you to know if they are suitable for your driving style and climate conditions.

Where to buy wipers for Škoda Yeti: checked shops and prices

When buying wipers, it is important to avoid counterfeits, especially when it comes to brands. Bosch, Denso or Valeo. We recommend the following verified sites:

Store Average price (set), rub. Pros Cons
EXIST.ru 1 000–2 000 Original and analogues, fast delivery Prices are above average
Autodoc 800–1 800 Frequent discounts, wide range Long delivery to regions
Kufar (for Belarus) 600–1 500 Low prices, many used options Risk of running into a fake
Local shops (e.g., AutoSpetsCenter) 900–2 200 You can touch before you buy Limited selection

When purchasing online, be sure to check:

  • 📦 Availability of hologram on packaging (for Bosch and Denso).
  • 📋 Article matching your model Yeti.
  • 📅 Production date Brushes older than 2 years can be re-dried.

FAQ: Frequently asked questions about Škoda Yeti wipers

Is it possible to install larger wipers than standard ones?

No, it'll put more pressure on the motor and the levers. Maximum permissible deviation - ±20 mm from standard size. For example, instead of 600 mm can be supplied 580–620 mm, but no more.

Why do the wipers on Yeti start to “jump” when working?

This happens due to:

  1. Wearing rubber bands (replacement is needed).
  2. Getting sand or dirt under the brush (rinse the glass and wipers).
  3. Weakening of the springs of the levers (requires adjustment or replacement of the levers).
Which washer is best used for Yeti wipers?

We recommend liquids without aggressive alcohols, for example:

  • Liqui Moly Scheiben-Frostschutz (winter version before) -25°C).
  • Sonax Clear View (Summer, with antistatic effects)
  • Hi-Gear HG5619 (Universal, does not freeze to a minimum) -30°C).

Avoid cheap methanol-based washers, which destroy the rubber of the brushes.

What if the Yeti wipers do not return to their original position?

This is a sign of a problem motor gearbox or limit switch. Check:

  1. fuse F30 (10A) in the fuse box.
  2. The condition of the gear gear gear gear gear gear gear (when wear is required replacement of the motor, article). 5E1 955 119).
  3. Wiring for breaks or oxidation.

If the problem is at the end, it can be replaced separately (article). 5E1 955 279).

How much do the original wiper levers cost for Yeti?

Prices for levers (without brushes) in official catalogs:

  • Left lever: 5E1 955 759 A — ~2,500 rub.
  • Right lever: 5E1 955 760 A - ~2,300 rubles.
  • Rear lever: 5E5 955 701 — ~1,800 rub.

Analogues from Febi or Topran They will cost 1.5-2 times cheaper.