Škoda Fabia 2 emblem on the hood: how to select, remove and install correctly

Hood emblem Škoda Fabia second generation (2007–2014) is not just a design element, but a calling card of the car. Over time, it becomes dull, becomes scratched, or even falls off due to a damaged fastener. You can restore the original appearance of the car yourself, but to do this you need to know the nuances: from choosing an original part to correct installation without damaging the paintwork.

In this article we will look at all aspects of working with the logo. Fabia 2 - from standard sizes and articles to step-by-step instructions for dismantling and installation. We will pay special attention to typical mistakes that lead to peeling of the glue or corrosion under the badge. If you are planning tuning (for example, installing an LED or 3D emblem), you will also find useful tips here.

Original emblems for Fabia 2: articles and sizes

Factory emblem Škoda for the second generation Fabia has clear geometric parameters and fastenings, which depend on the year of manufacture and configuration. Original parts are made from ABS plastic with a chrome or matte finish, and their dimensions are standardized for all modifications (including Combi and RS).

Main articles of the original emblems:

• 🔹 5E0 853 701 B — standard emblem (2007–2010, without backlight)
• 🔹 5E0 853 701 C — updated version (2010–2014, with modified mount)
• 🔹 5E0 853 701 D - emblem for Fabia RS (sports design)
• 🔹 5E0 853 702 - icon for Fabia Scout (with protective coating)

Dimensions of the emblem (in mm):

Parameter	Standard version	Fabia RS
Length	72 ± 1	75 ± 1
Width	68 ± 1	70 ± 1
Height (with mount)	12	14
Diameter of holes for pistons	4.5	5.0

Important: emblems for restyled Fabia 2 (after 2010) have reinforced pistons and a different glue composition. Installing the old version on a new machine will lead to delamination after 1-2 years.

How to remove an old emblem without damage

Removing the badge from the hood Fabia 2 requires caution: incorrect actions can damage the paintwork or leave traces of glue. The main problem is dried double-sided tape, which over time turns into a hard crust. Let's look at two proven methods.

Method 1: Heat and thread

1. Heat the emblem with a hair dryer (temperature 60–80°C) for 2–3 minutes.
2. Thread a thin line or dental floss under the badge, moving it back and forth.
3. Carefully pry off the emblem with a plastic spatula, avoiding metal tools.

Method 2: Solvent

• 🧴 Apply WD-40 or a special glue cleaner (3M Adhesive Remover) around the perimeter of the emblem.
• Wait 10–15 minutes until the mixture softens the glue.
• Remove the badge by prying it off the edges with a plastic pick.

⚠️ Attention: Do not use acetone or gasoline - they will damage the paintwork on the hood. Also avoid metal scrapers: even minor scratches on Fabia 2 lead to corrosion due to a thin layer of paint.

Washing and drying the hood|Protecting adjacent elements with masking tape|Preparing tools (hair dryer, thread, plastic spatula)|Checking the heating temperature (not higher than 80°C)-->

Choosing a new emblem: original vs. analogue

When purchasing a replacement for Škoda Fabia 2 owners are faced with a dilemma: to take an original part or an analogue. Original emblems guarantee a perfect fit and durability, but their price is 2-3 times higher (from 1,500 to 3,000 rubles). Analogues (for example, from Heko or Febi) are cheaper, but often have problems with fastening or the quality of chrome plating.

Selection criteria:

• 🔍 Material: ABS plastic with UV protection (original) vs. cheap polypropylene (analogs).
• 🎨 Coverage: The chrome should be uniform and free of bubbles. There should be no streaks on the matte emblem.
• 🔗 Mount: The original pistons have rubber gaskets that prevent corrosion.
• 📏 Fit to size: Even a 1-2mm difference will result in a crooked installation.

Popular analogues with good reviews:

Brand	Article	Price (RUB)	Features
Heko	85941	800–1 200	Good chrome plating, but weak glue
Febi	27660	950–1 400	Reinforced caps, but fades after 2 years
Starline	SK-005	600–900	Budget option, suitable for temporary replacement

Tip: If you choose LED emblem, please pay attention to the model with IP67 — it is protected from moisture and dust. For Fabia 2 suitable option with connector USB-C for connection to the on-board network.

Installing the emblem: step-by-step instructions

Installing a new badge on the hood Fabia 2 requires precision: even a slight shift will ruin the appearance. Follow the algorithm:

1. Surface cleaning: Remove any remaining old adhesive with solvent, then degrease the hood isopropyl alcohol (at least 90%).
2. Markup: Place the emblem on the hood and outline it with masking tape to mark the position.
3. Mount:
   • For emblems with pistons: insert them into the hood holes and snap them into place.
   • For adhesive emblems: apply 3M VHB on the back of the badge, then press for 30 seconds.

Fixation: Secure the emblem with masking tape for 24 hours (for adhesive models).

⚠️ Attention: If you are installing an LED emblem, first thread the wires through the hood seal and into the engine compartment. Use corrugation with a diameter of 6 mmto protect the cable from chafing.

Typical installation errors:

• 🚫 Using superglue: It destroys the plastic of the emblem and spoils the paintwork.
• 🚫 Incorrect position: The emblem must be strictly centered between the headlights. A deviation of even 3–5 mm is striking.
• 🚫 Ignoring temperature: Glue 3M VHB loses properties at temperatures below +10°C.

Emblem tuning: LEDs, 3D, vinyl

Standard emblem Fabia 2 can be transformed with the help of tuning. Popular options:

• 💡 LED backlight: Emblems with RGB tape (for example, from Philips Hue) allow you to change the color through the mobile application. To connect you will need a control unit (12V→5V) and a relay synchronized with the dimensions.
• 🎨 3D logo: Three-dimensional badges made of polyurethane resin (for example, from Badges 4U) give the car an aggressive look. The weight of such an emblem is up to 200 g, so the fastening must be reinforced.
• 🎭 Vinyl wrap: Matte or carbon film (3M 1080) is applied to the standard emblem. Service life - up to 5 years.
• 🔄 Removable emblem: Magnetic mounts (eg from Magnetar) allow you to quickly remove the badge before washing or for safety reasons.

Example of LED emblem installation:

1. Connect the RGB strip to the control unit (for example, Arduino Nano).
2. Pass the wires through the corrugation into the interior (through the hole near the gas pedal).
3. Connect the unit to the size fuse (number F37 in the mounting block Fabia 2).
4. Secure the emblem with double-sided tape and cover the wires with black heat-shrinkable tape.

⚠️ Attention: An LED emblem with a flashing mode can be regarded as a violation of traffic rules (Article 12.5 of the Administrative Code). Use only static backlighting in white or yellow.

How to avoid corrosion under the emblem?

To prevent rust under the badge, apply to the hood before installation. anti-corrosion primer (for example, Body 950) and close it clear varnish. Also check the condition of the pistons once a year - if they become oxidized, replace them with new ones (part number N 908 132 02).

Caring for your emblem: how to extend its life

Hood emblem Fabia 2 exposed to aggressive influences: from chemicals on the roads to ultraviolet radiation. To keep it in its original appearance, follow the recommendations:

• 🚿 Washing: Use only contactless shampoos (for example, Karcher RM 533). Brushes and sponges scratch chrome.
• 🧴 Polishing: Apply once every 3 months wax protective layer (Collinite 845). For a matte emblem, use Chemical Guys Matte Detailer.
• 🌞 UV protection: Park in the shade or use hood cover made of microfiber.
• ❄️ Winter care: After driving on roads treated with chemicals, wash the emblem distilled water.

What to do it's impossible:

• 🚫 Wash the emblem under high pressure (more than 100 bar) - this will tear off the protective coating.
• 🚫 Use abrasive polishes (for example, Gojo) - they wear off the chrome.
• 🚫 Apply to the emblem silicone sprays - they attract dust.

If the emblem begins to fade, it can be restored:

1. Clean the surface white spirit.
2. Apply chrome spray (Spray Chrome) in 2–3 layers.
3. Cover acrylic varnish for protection.

Common problems and their solutions

Owners Fabia 2 often encounter typical problems associated with the logo. Let's look at the most common cases and ways to eliminate them.

Problem	Reason	Solution
The emblem is falling off	Dried glue or broken pins	Clean the hood, use a new one 3M VHB or replace the pistons (item no. N 908 132 02)
There is rust under the emblem	Damaged paintwork or corrosion of piston	Remove rust converter (Tsinkar), apply primer and varnish
The chrome has faded	Oxidation or exposure to reagents	Polish GOI paste or cover vinyl film
The emblem is wobbly	Loose pins or deformed fasteners	Place rubber gaskets or replace the fastening with an adhesive one

If the emblem is damaged mechanically (for example, after an accident), it can be restored using epoxy resin:

1. Clean the chips with sandpaper P800.
2. Apply resin (Epoxy Resin) and polish after drying.
3. Cover UV protective varnish.

FAQ: Answers to popular questions

Is it possible to install an emblem from Fabia 3 to the second?

No, the emblems are not compatible. U Fabia 3 the badge is wider (78 mm versus 72 mm for Fabia 2) and has a different fastening (without pistons). Attempting installation will result in misalignment and damage to the hood.

How to remove the emblem if it is glued with superglue?

Will need dimexide (sold at the pharmacy). Apply it to a cotton pad, apply it to the emblem for 5-10 minutes, then carefully lift the badge. After removal, clean the hood acetone and apply new glue.

What to do if paint bubbles appear under the emblem?

This is a sign of corrosion. Required:

1. Remove the emblem.
2. Clean rust down to metal.
3. Apply primer with zinc (Body 960).
4. Paint and varnish.
5. Install the emblem with new glue.

If the corrosion is deep, take it to a body shop.

Can the emblem be painted to match the body color?

Yes, but for this you need:

1. Remove the emblem and clean it.
2. Apply primer for plastic (Plasti Dip).
3. Paint in 2-3 layers (use auto enamel the same code as the body).
4. Cover matte or glossy varnish.

Please note that after painting the emblem will lose its three-dimensional effect.

How to protect the emblem from vandals?

There are several ways:

• Install removable logo on magnets (for example, from Magnetar).
• Paste transparent protective film (XPEL).
• Use anti-vandal stainless steel emblem (for example, from Badges Unlimited).
• Park in well-lit areas or paid parking lots.