Many compact SUV owners Skoda Yeti They need to remove the glove box. This may be required to replace a burnt-out backlight lamp, install additional equipment, repair a broken lock, or simply to eliminate pesky creaks in the dashboard. The procedure is simple, but has its own technical nuances, which are important to consider so as not to damage the fragile plastic of the cabin or mounting.
Unlike some other models of the concern VAG, the design of the glove compartment on the Yeti requires careful handling of the fixtures, as they are located in hard-to-reach places. If you plan to do this work yourself, you will need a minimum set of tools and knowledge of the right sequence of actions. In this article, we will take a detailed look at each stage so that you can avoid common disassembly mistakes.
Preparing tools and workspace
Before you start physical impact on the elements of the interior, you need to prepare the workplace. Clean the floor in front of the passenger seat of debris and put a soft cloth or mat. This will protect the flooring from accidental scratches if you drop the tool or the box itself when you are removed. Having free space will allow you to comfortably manipulate details without the risk of damaging neighboring nodes.
To carry out the work, you will need a standard set of keys and screwdrivers. Pay special attention to the choice of screwdriver, as plastic fixtures Skoda Yeti They are very sensitive to excessive pressure. Use a flat screwdriver with a rounded end or a special plastic tool to dismantle the panels so as not to leave deep traces on the surface.
- π‘ Flat screwdriver with soft tip or plastic blade for slashing the fixers
- π§ Cross screwdriver (PH2) for unscrewing screws fastening
- π¦ Lighting for hard-to-reach areas inside a niche
- 𧀠Gloves to protect hands from sharp plastic edges and dirt
Sometimes, access to electrical backlight connectors may be required during operation. In this case, it will be useful to have a tester or multimeter on hand to check the integrity of the circuit before starting disassembly. It is also recommended to study the layout of the mounts in advance, so as not to waste time searching for hidden screws during the dismantling process.
β οΈ Before starting work, be sure to open the car doors for ventilation. The use of screwdrivers in a confined cabin space can lead to the accumulation of odors or accidental damage to the upholstery of the doors.
Step 1: Removing the plastic cover and clips
The first step is to remove the decorative pad, which covers the opening mechanism and part of the internal fastenings. On the model. Skoda Yeti This lid is usually held on plastic latches, which can be rigid. You need to gently tuck the edge of the lid with a screwdriver, taking care not to break the fragile protrusions holding the element in place.
After removing the overhead cover, open the glove box itself to the point. It is in this position that the main mounting points are visible, which are often hidden under plastic plugs. Inspect the inner side wall of the box: there you should see the holes through which access to bolts or screws of attachment to the car body passes.
- πͺ Open the glove compartment as wide as possible to free access to the mechanism
- π Carefully inspect the side walls for the presence of hidden screws under plugs
- π οΈ Use a plastic spatula to carefully remove the decorative lining
If you see screws twisted into the ends of the side walls, they must be unscrewed with a cross screwdriver. Do this slowly so as not to tear the thread in the plastic case. In some modifications Yeti Instead of screws, complex latches can be used, which require simultaneous pressing of special levers on both sides of the box.
βοΈ Preparation for dismantling
Step 2: Disconnect electrical connections
Once the mechanical mounts are weakened, do not rush to completely remove the box. In most configurations Skoda Yeti in the glove compartment there is a backlight, which is connected to the on-board network through the connector. If you try to remove the box without turning off the wire, you risk breaking the wiring or damaging the connector itself, resulting in expensive electrical equipment repairs.
Find the wire harness going to the light bulb. It usually passes through a hole in the back or upper part of the niche. Carefully unfasten the connector lock and pull the plug from the lamp socket. Be careful as the wires may be short and when you are under heavy tension, the insulation or contacts inside can be damaged.
- π‘ Find the power connector of the light bulb inside the niche
- π Press the connector lock and gently disconnect the plug.
- π¦ Use a flashlight to see the connection location in the dark
If you have additional electronics installed in your car, such as a 12-volt socket or a USB port located in the glove compartment area, they must also be turned off. Check for such items before fully removing the box. The absence of connected wires is a guarantee that when installing you will not forget to connect anything back.
What to do if the connector is stuck?
If the connector is not removable, do not use force. Try to gently swing it from side to side, slightly twisting. Sometimes it helps to apply a small amount of silicone lubricant to the contacts, but this should be done extremely carefully so as not to stain the plastic of the cabin.
Step 3: Removing the glove box
Now that all screws are unscrewed and the electrical connectors are disconnected, you can proceed to the final stage of extraction. Skoda Yeti has a design where the box is held on hinges or special guides. You need to simultaneously pull the box on yourself and slightly tilt it to remove the mounts from the grooves. Act smoothly so as not to damage the hinges if they are plastic.
Sometimes it happens that the box is βstickβ to the seal or stuck due to distortion. In this case, you should not pull it with force. Try to sway it slightly left-right, gradually increasing the amplitude. If the resistance is too high, check to see if any hidden bolts that may have been missed in the previous stages are unscrewed.
After removing the box, carefully examine the installation site. There may accumulate dust, small debris or even forgotten items that would interfere with the normal operation of the mechanism. Clean the niche of dirt and wipe it with a dry cloth to avoid extraneous noises in the future.
- Once a month
- Once every six months
- Only when you see dirt.
- I never read
Repair and modernization after dismantling
Once the glove compartment is removed, you have a wide opportunity for various improvements. The most common case is the replacement of the light bulb with a brighter LED. To do this, it is enough to screw a new lamp into the cartridge or solder the LED directly if the cartridge is outdated. Also, many owners install additional outlets or USB-hubs for charging gadgets.
Another popular direction is the elimination of creaks. To do this, a felt tape or a special damper material is glued to the plastic joints of the box and instrument panels. This completely eliminates unpleasant sounds when driving on uneven roads. In addition, you can install an opening limiter so that the box does not open too wide and does not hit the door.
| Type of work | Required materials | Difficulty | Lead Time |
|---|---|---|---|
| Replacing the backlight lamp | LED T10 lamp, tweezers | Low | 10-15 minutes |
| Eliminating squeaks | Felt tape, glue. | Average | 30-40 minutes |
| Installation of additional sockets | 12B socket, wire, fuse | High | 1-2 hours |
| Castle repair | New lock, lubricant. | Average | 45-60 minutes |
If you plan to install complex equipment, it is recommended to lay the wires in advance and secure them with screeds. This will ensure the reliability of the attachment and eliminate the possibility of rubbing the insulation against the sharp edges of the metal. After completion of all work, be sure to check the operation of all installed elements before assembling the glove compartment in place.
β οΈ Note: When installing additional equipment, do not connect the wires directly to the battery without a fuse. This can lead to short circuit and fire when overloading the wiring.
Reassembly rules and final inspection
The process of placing the glove box back on Skoda Yeti It is almost identical to the dismantling, but is performed in reverse order. First, plug in the electrical connectors, making sure they click and lock. Then carefully insert the box into the slots, combining the mounts with holes in the instrument panel. Do not use force if the details do not agree β check the correct position.
Once the box is in place, twist all the screws of the attachment. Tighten them evenly to avoid skewing the body. Install the decorative pad back and check its fixation. It should sit tightly, without gaps and backlashes, which could lead to the appearance of new creaks.
- β Check the light bulb before final assembly
- π§ Tighten all screws of attachment with a cross screwdriver
- πͺ Close and open the glove compartment several times to check the progress
At the end of the work, wipe the surface of the box and the instrument panel from fingerprints and dust. Check if there are any tools or small parts left inside the cabin. If you have installed additional accessories, make sure that they do not interfere with the opening of the glove compartment and do not interfere with the driver or passenger.
The correct sequence of electrical connection and accurate fixation of fasteners is the guarantee that the glove compartment will work silently and reliably for a long time.
Typical problems and their solutions
Owners Skoda Yeti Sometimes they face problems that are not solved by simply removing the glove compartment. For example, the lock mechanism can jam due to wear of plastic gears. In this case, a complete replacement of the locking mechanism, which is often sold as a collection with a handle, will be required. Also common problem with the jamming of the box due to deformation of the body at extreme temperatures.
If the glove compartment opens with difficulty or does not close until the end, check the condition of seals and guides. Sometimes it is enough to simply lubricate the moving parts with silicone lubrication. In more complex cases, it may be necessary to adjust the position of the loop or replace the broken plastic lever that is inside the mechanism.
β οΈ Warning: Do not try to force open the jammed glove compartment with the key to the door lock. This can lead to the breakage of the larva of the lock and expensive repair of the entire instrument panel.
To prevent such problems, it is recommended to periodically conduct a preventive inspection and maintenance of the mechanism. Cleaning from dust and lubrication of rubbing surfaces significantly prolong the service life of the cabin elements. If you notice the first signs of wear and tear, it is better to replace the damaged part immediately to avoid more serious breakages in the future.
FAQ: Frequently asked questions
How long does it take to remove the glove compartment on the Skoda Yeti?
The average process takes 15 to 30 minutes unless you plan to install additional equipment. If youβre doing it for the first time, set aside about 45 minutes to study the design and work it out.
Do I need to remove the battery before turning off the lighting wires?
No, you don't have to take off the battery. Turning off the light connector is safe and does not require de-energizing the entire system of the car, since the load is minimal.
Is it possible to remove the glove compartment without removing the instrument panel?
Yes, on the model. Skoda Yeti The glove box is removed separately without dismantling the main dashboard. This is one of the design features that simplify maintenance.
What to do if the plastic cap locker breaks?
If the lock breaks, the cover can be temporarily secured with bilateral tape or replaced with a similar element from the donor. Ideally, replace the broken part with a new one.
Can I install a LED light instead of a regular lamp?
Yes, installing LEDs instead of regular incandescent bulbs is a common practice. This gives a brighter light and reduces the load on the electrical system.
Before you start unscrewing the screws, take a picture of the location of all the elements on the phone. This will help you quickly and correctly put the glove compartment back together, especially if youβre doing it for the first time.