Removal of the front seat in the ŠKODA Octavia Tour: instructions with photos and nuances

Removing the front seat ŠKODA Octavia Tour The task faced by owners when repairing the cabin, replacing the skin or diagnosing electronics. The procedure seems simple, but has a number of critical nuancesIgnoring which can damage the mounts, wiring or even airbags. In this article, we will analyze the process step by step, taking into account the characteristics of different generations of the model (A5, A7, FL), as well as give recommendations on tools and precautions.

It is important to understand that the design of the seat mounts in Octavia Tour different from standard Octavia - here are used reinforced guides due to the increased wheelbase and weight of the station wagon body. In addition, in cars with electric adjustments will have to turn off the battery to avoid short circuit. If you have never done such work, it is better to prepare a photo fixation of each stage in advance - this will help with the reverse assembly.

Preparing for dismantling: tools and safety precautions

Before you begin removing the seat, make sure you have everything you need. The main tool is 13 mm socket wrench (less often by 14 mm, depending on the year of production) and head with extension to access the back bolts. You'll also need:

• 🔧 Flat blade screwdriver (for removing plastic stubs).
• 🔌 Multimeter (to check the circuits after disconnecting the wiring).
• 📸 Smartphone (To fix the location of the connectors and bolts).
• 🧤 Gloves (Not to damage the skin or the cloth).

Pay special attention airbags: in the seats Octavia Tour side-airbag (option) Side Airbag) side panels shall not be struck. If your car is equipped with seat position memory (Memory Seat), before turning off the battery, reset the settings through the menu Settings → Memory of the seats → Reset.

⚠️ Attention: In heated seat models (Seat Heating) after dismantling, be sure to check the resistance of the heating elements. Normal value for Octavia Tour 1.5-2.5 Ohms. If the indicators go beyond, this indicates a break in the chain.

Disabling the battery: why is it critical?

Many people miss this step, but in ŠKODA Octavia Tour electric-powered seats or airbags power outage is mandatory. The reason is the risk of fireworks of airbag pyropatrons in case of accidental closure of the wiring. To avoid problems:

1. Turn off the ignition and remove the key.
2. Open the hood and remove the negative terminal from the battery (a 10 mm wrench).
3. Wait at least 10 minutes This time is necessary for the discharge of capacitors in the airbag system.

In vehicles with the system KESSY (keyless access) after the battery is turned off, it may be necessary to resynchronize the keys. For this:

1. Insert the key into the ignition.
2. Turn to the "ON" position (without starting the engine).
3. Press the lock button on the key 3 times in a row.

⚠️ Attention: If in your Octavia Tour audio system with code installed (Safe Mode), after the battery has been turned off, it will be necessary to re-enter it. The code is usually listed in the service book or on a sticker under the glove compartment.

Removing plastic plugs and accessing bolts

Seat anchorage bolts in Octavia Tour hidden under decorative stubs. Their location depends on the configuration:

• 🚗 In basic versions (Ambition, Active) - 4 bolts (2 front, 2 rear).
• 🚗 In the top (Style, RS) - additionally 2 bolts under the armrest.
• 🚗 In cars with electric drive - 2 more bolts of the mounting of the adjusting motor.

To remove the plugs:

1. Put them in a screwdriver with a flat sting, starting at the back edge.
2. Pull up carefully - they are held on plastic clips.
3. If the plug is cracked, do not use superglue: original parts can be ordered by catalog number 6Q0 881 101 (for A5) or 5E0 881 101 (for A7).

Generation	Number of bolts	Key size	Features
Octavia Tour A5 (2004–2013)	4	13 mm	The bolts can be boiling – use WD-40.
Octavia Tour A7 (2013–2020)	4–6	13 or 14 mm	In versions with ventilated seats (Ventilated Seats) further disconnect the tubes.
Octavia Tour FL (facelift)	6	13 mm	Bolts under the armrest require a head with a flexible extension cord.

Removing the seat: step-by-step instructions

When all the plugs are removed and the bolts are available, proceed to unscrew. Start with front-bolt - they're usually easier to handle. Then:

1. Unscrew the rear bolts using an extension cord. V Octavia Tour A7 They can be hidden under a plastic lining, and you have to move it forward.
2. If the seat does not rise, check if you have forgotten to disconnect the heating connector (yellow connector under the seat).
3. Lift the seat behind the front edge and gently move back to free the guides.

In cars with Memory Seat There will be a control unit under the seat - it cannot be dropped or pulled by the wires. The connectors here are fixed with latches: press them from the sides and pull down. Don't use force If the connector does not disconnect, check if there is an additional fixator (in) Octavia Tour RS is red.

What to do if the bolt breaks?

If the bolt broke when unscrewed, do not try to drill it yourself. V Octavia Tour guide seats - part of the supporting structure of the body. Contact a service that uses special extractors (for example, Hazet 4962-1).

After removing the seat, inspect the guides for corrosion or deformation. V Octavia Tour mileage of more than 150,000. km often wear plastic bushings - their catalog number 1K0 881 201. Replace them at the first sign of backlash.

Disconnecting electrical wiring and diagnostics

In the seats with electric drive under the skin are hidden several connectors:

• 🔌 Main connector (black, 12-pin) - powered by the adjusting motors.
• 🔌 Heating connector (Yellow, 2-pin) - only in trim levels with Seat Heating.
• 🔌 Employment sensor connector (Grey, 4-pin) - is responsible for the operation of the airbag.

Before disconnecting, take a picture of the location of each connector. V Octavia Tour with the system Lane Assist There may be an additional position sensor under the seat - its connector is marked with a blue tag.

After disconnecting, check the chain with a multimeter:

• Resistance of heating elements (if there is heating).
• Voltage at the contacts of the adjusting motors (should be 0 V after the battery is turned off).
• Integrity of the wiring of the employment sensor (breakage will lead to an error) Airbag Fault on the dashboard).

💡

If after the reverse assembly the indicator of the airbag lit up, check the connector of the employment sensor. Often the problem is solved by reconnecting it. If the error persists, a reset through a diagnostic scanner is required (e.g., VCDS).

Reverse installation: nuances and common mistakes

When mounting the seat back, watch for:

1. Position of the guides They should enter the grooves without distortion.
2. Tightening the bolts — tightening torque for Octavia Tour amounts to 25 Nm (for A5) and 30 Nm (for A7).
3. Connecting connectors - they have to click on the fix.

A common mistake is to forget to connect the employment sensor connector. In this case, an error will light up on the dashboard. AirbagAnd the passenger airbag won't work in an accident. Another problem is the pulled bolts, which can deform the guides. V Octavia Tour with all-wheel drive (4x4) this is particularly critical because the body is under heavy loads.

⚠️ Attention: After installing the seat, check the operation of all functions: height adjustment, backrest tilt, heating (if any). In position memory machines (Memory Seat) calibrate: hold the button. M 5 seconds until the sound is heard.

💡

If after assembly the seat creaks or luftite, the problem lies in the worn bushings of the guides. Their replacement takes 20 minutes and costs 500-800 rubles (parts + work).

Common problems and their solutions

When removing seats in ŠKODA Octavia Tour Owners face typical difficulties:

Problem	Reason	Solution
Bolts won't come off	Corrosion or factory puff	Use a penetrating lubricant (WD-40 or Liqui Moly MoS2) and a percussion nut.
The seat does not move along the guides.	Deformation or contamination	Clean the guides and lubricate with silicone lubricant (CRC 5-56).
Error Airbag after assembly	Unconnected Employment Sensor	Check the connector under the seat (gray, 4-pin).
Heating does not work	Open circuit or contact oxidation	Clean the contacts with sandpaper (grindness 600) and check resistance.

B Octavia Tour leather-platedLeather Package) the side panels are often damaged during dismantling. To avoid this, use plastic spatulas to remove the clips. If the casing is still torn, glue is suitable for repair. Loctite 401 or a specialized composition for the skin (Leather Repair Kit).

Another feature is in cars with a system ErgoActive (massage seats) additional motors are hidden under the trim. Their connectors are marked with red marks. When disconnecting, do not pull on the wires - they are fragile and may come off the board.

FAQ: Frequently asked questions

Do I need to remove the seat to replace the upholstery?

Not always. B Octavia Tour You can replace the covers or repair minor damage without complete dismantling, by removing only the backrest. However, for high-quality reupholstery or repair of the foam filler, the seat will have to be removed.

What is the weight of the front seat Octavia Tour?

Weight depends on the configuration:

• Basic seat (without electric drive) - 18–20 kg.
• With electric drive and heating - 22–25 kg.
• Sports version (RS) - up to 28 kg due to the reinforced frame.

For dismantling, it is better to work with an assistant, especially if the seat is equipped with side airbags.

Is it possible to remove the seat without disconnecting the battery?

Technically yes, but it is extremely dangerous. B Octavia Tour With airbags, even a minor short circuit can cause them to deploy. If you're confident in your skills, at least remove the safety F33 (10 A) in the block under the steering wheel - it is responsible for the airbag circuits.

What should I do if the seat is crooked after installation?

Check:

1. Evenness of the guides - they could be deformed during dismantling.
2. Tightening the bolts - they should be tightened with the same force.
3. Condition of the plastic bushings - if they are worn out, the seat will play.

B Octavia Tour A7 curvature may be due to incorrect calibration of the position sensor. A diagnostic scanner is required to reset the error.

Where can I buy original mounting bolts?

Original bolts can be ordered from an authorized dealer using catalog numbers:

• N 908 132 01 - for Octavia Tour A5 (13 mm).
• N 910 867 01 - for Octavia Tour A7 (14 mm).

Analogues: Febi 26216 or SWAG 30 92 6216. Cost - from 50 to 150 rubles per piece.