Removing the rear seat Škoda Octavia A task that every owner sooner or later faces. The reasons can be different: from the banal cleaning of the cabin to the replacement of the skin, repair of electronics or the installation of additional equipment (for example, a subwoofer or battery). Despite the apparent simplicity, the process has nuances that depend on the generation of the model (see below).Octavia A5, A7, restyled versions FL) and body type (liftback, station wagon, sedan).

In this article, we will analyze the step-by-step algorithm for removing the back sofa, taking into account all the technical features. You will learn what tools you will need, how to avoid damage to plastic latches, and what to do if the seat is stuck to the body. And also, Discover the secret of quick access to hidden attachments, which is not written about in the official manuals.

Preparation: Tools and Safety Precautions

Before starting work, make sure you have everything you need. Most operations are performed without specialized devices, but some aspects require accuracy.

  • 🔧 Tools: flat screwdriver (preferably with a plastic tip), end key for 10 mm (for cushion mounts), flashlight, wipes or rags.
  • 🧤 Protection: gloves (so as not to scratch the plastic and not to stain your hands), a rug or cardboard to protect the floor from scratches.
  • 📸 DocumentationTake a picture of the location of the mounts and wiring (if you plan to turn off the connectors).

Pay special attention electrical components. If your Octavia equipped with heated rear seats, airbags or belt sensors, be sure to turn off the battery's minus terminal 10-15 minutes before work begins. This will prevent the pyropatrons from short-circuiting or firing.

⚠️ Attention: On models with side airbags in the seat backs (option) Side Airbag Rear) the use of force in dismantling is strictly prohibited. Damage to the pyropatron can lead to its uncontrolled operation.
📊 What generation is your Škoda Octavia?
  • A5 (2004–2013)
  • A7 (2013–2020)
  • A8 (2020–present)
  • I don't know

Rear seat design: what you need to know

Back seat Škoda Octavia consists of two main parts: cushions (lower part) and backrests. Depending on the configuration, the backrest can be whole or divided in a 60:40 ratio. The latter option is more common and allows you to fold the seat for the transportation of long loads.

The cushion is fixed by:

  • 🔗 Metal hooks (2-4 pieces, depending on the year of production) - fix the front part of the pillow to the body.
  • 🔩 Bolts or nuts (usually 2 pieces, under plastic plugs) - hold the back.
  • 🔌 Electrical connectors (if there is heating or belt sensors).

The back is attached to the body with the help of lenshidden under plastic covers. In the models with ISOFIX Additionally, metal brackets are provided for mounting child seats.

Generation Pillow mounting type Number of back bolts The presence of wiring
Octavia A5 (2004–2013) Hooks + 2 bolts 4 bolts (2 on each side) Optionally (heating)
Octavia A7 (2013–2020) Hooks + 2 nuts 2 bolts (hidden under the linings) Heated, belt sensors
Octavia A8 (2020–present) Hooks + latches No bolts (clips) Heating, sensors, USB port
💡

On models with heated seats, the power connectors are often located under the pillow closer to the back. In order not to damage the wires, before removing carefully pull the pillow up and look under it with a flashlight.

Step-by-step instructions: removing the seat cushion

Start by removing the bottom (pillow). This stage is the easiest, but requires caution not to break the plastic latches.

  1. Open the rear doors and lower the front seats to allow access to the mounts.

  2. Put plastic plugs in the front of the pillow (from the passengers’ feet) with a flat screwdriver. There are metal hooks underneath.

  3. Carefully pull the pillow up and on yourself to free the hooks from the hooks on the body. Nana Octavia A7 You may need to put in a little more effort.

  4. Move to the back of the pillow. There are usually 2 bolts or nuts (under plastic caps). Unscrew them with the end key by 10 mm.

  5. If the pillow is equipped with heating, disconnect the power connector. To do this, press the lock and carefully pull the plug.

After removing the pillow, you will get access to hidden elements: the fuel tank (on models with gasoline engines), wiring and possibly a spare wheel (in station wagons).

☑️ Check before removing the pillow

Done: 0 / 4
⚠️ Attention: On Octavia A5 with diesel engines under the rear seat can be located adsorber (part of the fuel vapor capture system). Don’t confuse it with a fuel tank and don’t press on the hoses!

Dismantling the seat back: nuances and difficulties

The back is more difficult to attach than the pillow, especially on models with a split design (60:40). The main thing here is not to rush and follow the sequence.

Algorithm of actions:

  1. Remove plastic linings on the sides of the back (they are attached to clips). Put a screwdriver on them, starting at the bottom.

  2. On models with ISOFIX unscrew the brace mount bolts (usually 2 bolts for each brace, the key for 13 mm).

  3. Unscrew the back bolts to the body. Nana Octavia A7 They are hidden under decorative plugs in the lower part of the back (from the side of the trunk).

  4. If the back is equipped with seat belts, disconnect their connectors (usually they are located under plastic panels at the base of the back).

  5. Carefully pull the back up and on yourself, freeing it from latches. In separate seats, remove the smaller part (40%) first, then the larger part (60%).

On Octavia A8 The back is attached only to plastic clips without bolts. To remove it, you need to simultaneously press the latches in the lower part (on both sides) and pull up. This moment often causes difficulties for beginners.

What to do if the back is not removed?

If the back is jammed, check:

1. Are all the bolts unscrewed (sometimes one bolt is hidden under the skin).

2. Have you forgotten to disconnect the seat belts (their connectors can block movement).

3. Are there any additional latches under the decorative panels (relevant to the Octavia A7 FL).

If the problem remains, try to sway the back slightly from side to side without putting excessive effort.

Common mistakes and how to avoid them

Even experienced car owners sometimes make mistakes when removing the back seat. Here are the most common ones and ways to prevent them:

  • 🔧 Broken clipsDo not pull the pillow or back with force if it does not give in. Check all the mounts first. Nana Octavia A7 Clips often break down due to corrosion - treat them with WD-40 10 minutes before dismantling.
  • ⚡ Short circuitIf you forget to turn off the battery when working with heating, you can burn the fuse F37 (10A) per block SC (salon)
  • 🔩 Lost bolts: Back bolts on the back Octavia A5 They're non-standard lengths. If you lose, replace it with similar threads. M8x1.25 and 20 mm long.
  • 🧵 Torn skinningWhen removing the back, do not cling to the fabric or skin - only take on the plastic frame.

Another typical problem is folding-up on separate backs. If after removal you notice that one of the parts is not fixed in an upright position, check the plastic guides and lubricate them with silicone lubrication.

💡

Before assembly, clean all metal mounts of rust and apply a thin layer of lubricant (for example, Liqui Moly Kupfer-Spray). This will make the next dismantling easier and prevent creaking.

Build: How to set the seat back

The rear seat installation is done in reverse order, but there are a few key points that will ensure all systems work properly:

  1. Before mounting the back, check that all seat belt and heating connectors are connected correctly. Nana Octavia A7 The connector of the belt sensor has a key (protrusion), which should coincide with the groove on the plug.

  2. When installing the pillow, first hook it by the front hooks, then lower the back and twist the bolts. Do not tighten them completely until you make sure that the pillow is flat.

  3. Check the operation of the heating (if any): turn on the ignition and activate the heating at maximum power. After 2-3 minutes, touch the seat - it should be evenly heated.

  4. Make sure that the backrest is firmly fixed in the vertical position. If it wobbles, tighten the bolts or check the latches.

After assembly, check:

  • 🔗 Seat belts: they should be freely stretched and blocked with a sharp jerk.
  • 🔌 Electrician: the heated indicators on the dashboard shall light up and extinguish in sync with the press of the button.
  • 🔊 Creaks: If after installation there are foreign sounds, lubricate the plastic guide backs.

When professional help is needed

In most cases, the rear seat is removed from the Škoda Octavia It doesn't require a service. However, there are situations when it is better to trust the specialists:

  • 🚨 The airbag went off.: if the pyropatron activation occurred during the dismantling, the entire module must be replaced and errors reset in the control unit must be reset. Airbag.
  • ⚡ Electrical problems: if after connecting the heating or belt sensors on the dashboard errors are lit (for example, ESP or Airbag), a scanner will be needed.
  • 🔧 Frame damage: cracks in the metal frame of the back or pillow can weaken the structure, which is dangerous in case of an accident.
  • 🔥 Burning smell: if after the heating is turned on, the smell of scorched plastic is felt, this is a sign of a short circuit in the chain.

The cost of dismantling / installation of the rear seat in the service varies from 1,500 to 3,000 rubles, depending on the region and the complexity of the work. However, if you follow our instructions, you will save that money and gain invaluable experience.

💡

If after installing the seat on the dashboard lights up AirbagDon't panic. This is often due to improper connection of the connectors of the belt sensors. Check them again or reset the error through the diagnostic connector OBD-II.

FAQ: answers to frequently asked questions

Can I take the back seat off? Octavia A7 without disconnecting the battery?

Theoretically yes, but only if your configuration does not include heated seats and side airbags. However, we recommend always removing the terminal, as even a slight circuit can disable the comfort control unit (see below).BCM). On Octavia A8 With a USB port in the back, disconnecting the battery is mandatory!

How to remove the back seat if the bolts are boiling?

Use a penetrating lubricant (eg WD-40 or PB Blaster). Apply it to the thread and wait 15-20 minutes. If the bolt does not lend itself, try to slightly tap the key with a hammer (do not overdo it so as not to break the thread). In extreme cases, you can drill the bolt and replace it with a new one.

What if the rear seat belts do not work after the backrest is removed?

Most likely, you did not connect the belt sensor connector (it is located under the plastic lining at the base of the back). Check the fuse, too. F42 (15A) in the cabin unit. If the belts are still not blocked, a unit diagnosis is required. Airbag.

Can the removed seat be washed with water?

Yeah, but with caution. Do not direct the stream of water to foam padding - it dries for a long time and can become moldy. Use a soft brush and detergent to clean the skin (for example, Autoglym Interior Shampoo). After washing, dry the seat in the sun or with a fan.

How do I know if I have one in my Octavia side airbags in the rear seats?

Check the sticker on the door (from the driver's side) - all security systems are indicated there. Also pay attention to the inscription SIDE AIRBAG REAR on the back (usually on the inside). If in doubt, enter your vehicle’s VIN on the website. Škoda And check the equipment.