How to remove the back seat on the Škoda Rapid 2018: instructions with photos and videos

Rear seat removal in Škoda Rapid 2018 is a challenge that owners face when renovating the cabin, replacing the skin or installing additional equipment. At first glance, the process seems simple, but without knowing the design features of the model, it is easy to damage plastic latches or mounts. In this article, we will discuss step-by-step withdrawal algorithmWe list the necessary tools and point out the typical mistakes that beginners make.

The design of the back sofa in Rapid 2018 is different from previous generations: combined mounts are used here – metal hooks in the front and plastic latches in the rear. If you are planning to remove the seat for the first time, it is important to consider that improper force when disconnecting the latches can cause them to break. We will describe in detail how to avoid such situations, and give recommendations on how to avoid such situations. Safe working with salon elements.

Preparing for dismantling: tools and precautions

Before starting work, make sure you have everything you need. To remove the rear seat in Škoda Rapid No specialized tools are required, but some devices will greatly facilitate the process:

• 🔧 Flat head screwdriver (medium size) - for smearing plastic latches.
• 🔨 10 mm socket wrench - to unscrew the bolts of the attachment (if they are in your configuration).
• 🧲 Magnetic holder - so as not to lose small parts (nuts, washers).
• 📸 Smartphone - to fix the location of the fasteners before assembly.

Pay special attention salon safety. Before starting work:

1. Turn off the battery’s negative terminal if you plan to work with electricity (for example, when replacing the seat heating).
2. Remove from the trunk and cabin all heavy objects that can move when you manipulate the seat.
3. Use protective glovesSo as not to scratch the plastic panels.

⚠️ Attention: If your Rapid equipped with airbags in the rear seats (optional for some configurations), Don’t make any effort on the side of the sofa. This can cause the pyropatron to work. Check for the sign. AIRBAG on the skin.

Rear seat design in Škoda Rapid 2018: what you need to know

Rear seat in Škoda Rapid 2018 consists of two main parts:

1. The bottom part (sofa) - is attached to the body with four hooks in the front and two latches in the rear.
2. Backrest - fixed by two bolts at the bottom (under plastic plugs) and latches in the folding mechanism.

Depending on the configuration, the mountings may differ:

Equipment	Type of sofa attachment	Presence of heating	Additional nuances
Ambition	4 hooks + 2 latches	No	Plastic latches are fragile, require accuracy
Style	4 hooks + 2 latches + bolts	Yes (optional)	Bolts under the end key for 10 mm
Sport	4 hooks + reinforced latches	No	The back of the sofa may have additional fixtures

In models with heated seats under the sofa laid electrical wires – they can not pull or twist. If your car is equipped with this option, before removing disconnect the power connector (located under the front of the sofa).

Where is the heating connector?

In heated models, the connector is usually hidden under the left side of the sofa, closer to the back. It is fixed with a plastic fixator, which must be carefully flicked up.

Step-by-step instructions: how to remove the lower part of the seat

Start with the sofa being dismantled. This process takes no more than 10 minutes if you follow the algorithm:

1. Move the front seats back As far as possible to access the front mounts of the sofa.
2. Pry it up with a screwdriver plastic plugs on the front hooks (they are located at the corners of the sofa).
3. Pull the sofa up. from the front, the hooks must come out of the grooves. If the seat fails, check if the latches from the back are caught.
4. Disconnect the latches from the backby pressing them with your fingers or a screwdriver. They are located on the sides, the center of the sofa.

If the seat is removed for the first time, the latches may be tightly snapped. In this case, it will help. WD-40 Or another lubricant spray -- apply it to the latches 10 minutes before work.

⚠️ Attention: Do not pull the sofa on yourself - this can damage the skin or break the heating. The traffic must be strict. upUntil the hooks come out of the grooves.

Removal of the back of the back seat: features and nuances

The back is attached differently than the sofa, and its dismantling requires more care. V Škoda Rapid 2018 backrest is fixed:

• 🔩 Two bolts below (under plastic plugs).
• 🔗 Latches in the folding mechanism (if the seat folds in a 60/40 ratio).
• 🧵 The cable of the lock (in models with a central armrest).

Withdrawal algorithm:

1. Remove the plastic plugs at the bottom of the back (they are attached to the latches).
2. Unscrew the bolts with the end key by 10 mm.
3. If the backrest folds, find the latches in the mechanism - they are usually hidden under the skin. They need to be snapped by pulling on special loops.
4. Carefully remove the back, holding it by the side parts.

In models with centre-armrest Before removing the back, you must disconnect the trunk lock cable. It is attached to the back with a plastic fixator, which must be squeezed with your fingers and pulled the rope from the groove.

Common mistakes and how to avoid them

Even experienced car owners sometimes make mistakes when removing the back seat. Here are the most common ones and ways to prevent them:

• 🚫 Powerful action on latches - causes them to break down. Always check if they are caught in the sleeves.
• 🚫 Ignoring the heating connector - could cause a short circuit. Always disconnect it before dismantling.
• 🚫 Lost bolts or nuts Use a magnetic holder or container for small parts.
• 🚫 Incorrect installation back If the hooks are not in the grooves, the seat will stagger.

Another common problem is plating damage with a screwdriver. To avoid this, wrap the screwdriver sting. electrical tape Or use a plastic tool to dismantle the panel.

If you find that one of the latches has broken after removing it, do not try to fix it yourself. Original spare parts for Škoda Rapid can be ordered by catalog numbers:

• 6Q0 881 101 - Sofa latch;
• 6Q0 881 102 - front hook;
• 5E0 881 209 - back bolt.

Cleaning and maintenance after removing the seat

When the seat is removed, you have access to places that are not normally available for cleaning. Here's what's worth doing:

• 🧹 Vacuum the floor Under the seat, there is sand, dust and debris.
• 🧼 Clean the plastic guides hooks and mud latch (use a wet cloth and a soft brush).
• 🔧 Check the condition of the anchorages. If they are rusty, treat them. WD-40 or similar means.
• 🔌 Inspect the wiring (if there is heating) for rubbing or damage to the insulation.

If you have taken a seat to install additional equipment (such as a subwoofer or amplifier), make sure that:

• The wires do not lie on the sharp edges of the body;
• Equipment fastenings do not interfere with the seat re-mounting;
• All the connectors are securely insulated (use) heat shrink tube Or tape.

After cleaning or repairing, allow all surfaces to dry before mounting the seat back. Humidity under the skin can lead to mold or corrosion of metal parts.

Video instructions and additional materials

For a better understanding of the process, we recommend reading the video instructions. The sources verified are as follows:

• 📹 Official ŠKODA Channel - demonstration of the removal of the seat on Rapid 2018 (in)link).
• 📹 DIY car repair - analysis of typical errors (link).
• 📄 Club Škoda Forum Discussion of nuances for different configurations (link).

If you prefer text instructions, download repair manual for Škoda Rapid (article VW601.8206). It has mounting schemes and manufacturer recommendations.

For visual comparison, below is a table with photo fasteners:

element	Photo	Description
Front hook	[Hook photo]	Metal, enters the groove on the body
Back latch.	[Glatch photo]	Plastic, fragile – don’t put too much effort into it
Back bolt	[Bolt photo]	End key 10 mm, location under the cover

FAQ: Frequent questions about rear seat removal in Škoda Rapid

Can the seat be removed without tools?

Theoretically, yes, but only if the latches are not soured and easily snapped with your fingers. In 90% of cases, you can not do without a flat screwdriver - it is needed to remove plugs and fit latches. If you try to do this with your bare hands, there is a high risk of damaging the plastic or tearing the skin.

What to do if the latch breaks when removed?

If the latch is cracked or broken, it needs to be replaced. For Škoda Rapid 2018 is suitable for original spare parts 6Q0 881 101 (clicking) and 6Q0 881 102 (hook) A temporary solution may be to fix the seat with screeds, but it is not safe - with a sharp braking, the sofa can move.

Do I need to take off the back to get to the fuel tank?

No, to access the fuel pump or tank, it is enough to remove only bottom-sofa. The back is attached separately and does not interfere with the dismantling of the gas tank hatch. The exception is the model with gas equipment installed, where the cylinder can be located under the back.

How do you know if the seat is set back correctly?

After installation, check:

• The sofa does not stagger when pressed;
• All the latches clicked;
• The snails are fully in the grooves (no gaps).
• If there is heating, the connector is connected, and the indicator on the panel lights up.

If at least one of the points is not fulfilled, remove the seat and install it again.

Can the removed seat be washed with water?

Yes, but with reservations:

• Use cold water only And a soft brush.
• Don't wet. foam padding It dries for a long time and can become moldy;
• Use the cleaning to clean the skin. special means (for example, Autoglym or Sonax);
• After washing, dry the seat in the sun or with a fan.