Owners Skoda Octavia A7 often face the need to increase the volume of luggage space to transport large cargo. The standard trunk, although roomy, has length restrictions that can be easily eliminated if the rear compartment is removed correctly. The process of removing seats does not require special carpentry skills or complex diagnostic equipment, but it has its own specific features that are specific to the MQB platform on which this model is built.
Incorrect actions can lead to damage to the casing, plastic fasteners, or even a violation of the passive safety system if you do not know the algorithm for working with seat belt anchors. In this article we will look in detail at how to safely and quickly free up space without leaving marks on expensive interior materials. You'll learn exactly where to look for attachment points and how to avoid common beginner mistakes.
Preparing the vehicle and tools before starting work
Before proceeding with physical impact on the interior elements, it is necessary to ensure maximum comfort and safety of the process. First of all, roll the car onto a flat surface and put it on the handbrake to prevent any movement during manipulations with heavy elements. Open doors will provide plenty of room to maneuver, especially if you plan to move the sofa out through the side openings.
You don't need a full arsenal of locksmith tools, since the design Skoda Octavia A7 Provides quick-release mechanisms. However, it would be a good idea to have soft gloves and a clean rag to avoid scratching the plastic or staining the light-colored upholstery. If you have installed headrest back row, it is better to remove it in advance so that it does not interfere or get in the way under your hands.
- π οΈ Soft gloves to protect hands and upholstery
- π§Ή A clean cloth for cleaning small debris from under the seats
- π Tape measure for measuring cargo dimensions (optional)
- π‘ Flashlight for illuminating hidden fasteners
It is important to check for forgotten items such as coins, keys or documents in the recesses under the seats. When lifting the seat cushion, these objects may fall into hard-to-reach areas of the floor or damage the mechanisms.
β οΈ Attention: Before starting work, be sure to turn off ISOFIX system power supply (if it is active), in order not to accidentally damage the wires when removing the fasteners, although the risk is minimal, it is better to be safe.
Removing the lower seat cushion: step-by-step algorithm
The lower part of the rear sofa on Octavia A7 It is not fastened with bolts, but on special metal hooks hooked into loops on the floor of the car. This engineering solution allows you to quickly transform the interior, but requires knowledge of the exact point of application of the force. The pillow has two front fastenings that must be carefully released by lifting it up.
You need to sit in the front seat or kneel to have leverage to lift. Pull the front edge of the pillow up firmly, but not sharply, to avoid breaking the plastic hinge covers. Once the hooks are disengaged, the cushion can be easily removed.
- π Find the leading edge of the cushion, closer to the center of the cabin
- π Pull up over a special neckline or upholstery edge
- π Remove the pillow by pulling on yourself
- π§Ό Check the mounts for contamination
If you feel strong resistance, do not use brute force. Most likely, the mechanism is jammed with dirt or you are pressing the wrong point. Check to see if the seatbelt is clamped under the pillow, which often happens to inattentive drivers.
βοΈ Removing the pillow
Removing the upper back of the sofa and working with belts
After removing the lower cushion, access to the upper back mounts becomes completely open. The back is held at the upper edge, where the hinges are located, and at the lower edge, which is fixed in the grooves of the floor. On the model. Skoda Octavia A7 The back fixing mechanism has two types of fastenings: upper hooks and lower latches.
First, you need to unfasten the upper loops. To do this, you need to pull the back on yourself, simultaneously pressing the fixtures located on the sides. Pay attention to this. seat belts: they must be passed into special guides and not twisted, otherwise the back will not stand in place during the reverse assembly.
- π Undo the upper mounts, pulling the back on yourself
- π Carefully remove the lower latches from the grooves
- 𧱠Make sure the belts are not twisted or clamped.
- π¦ Place your back on a flat surface
Pay special attention to the right and left side sections, which may have individual folding mechanisms. If you have a version with a separate fold, each part must be removed separately, observing the procedure.
Safety belt anchorage nuances
When the back is removed, the seat belt often gets stuck in the guide. Do not pull the belt sharply, use a plastic card to release it from the lock so as not to damage the fabric and lock mechanism.
Features of the design and types of fasteners on different trim levels
Depending on the year of manufacture and configuration Skoda Octavia A7The design of the rear seats may have minor differences. In the basic versions, the fixers can be simpler, while in the top complete sets with Isofix And with the heated seats, the process requires more care because of the wires. It is important to understand that electrical connectors usually do not turn off when removed, since the wires have a sufficient margin of length.
| Equipment type | Mounting features | Dismantling nuances |
|---|---|---|
| Basic (Ambition) | Simple metal hooks | Take off without tools in 1 minute |
| Medium (Style) | Additional belt retainers | You need to carefully release the belts from the grooves |
| Top-end (Ambition/RS) | Heating wires and Isofix | Requires caution with wiring under upholstery |
| Station wagon (Combi) | Reinforced hinges | Back is heavier, need an assistant |
The differences may also be related to the presence of the armrest. If it is built into the back, its dismantling may require additional pressing on the locks located at the end of the armrest. Do not attempt to break the armrest by force, as the plastic is on the Octavia It is quite fragile at low temperatures.
β οΈ Note: If you plan to carry cargo that is pressing on the back, make sure it is completely removed, not just folded, to avoid damaging the folding and skinning mechanism.
- Sedan (Octavia)
- Universal (Octavia Combi)
- Other
- I don't know
Frequent mistakes and how to avoid damage to the cabin
The most common mistake is trying to remove the seat without prior preparation, which leads to the seat belts getting stuck. This can not only spoil the belt fabric, but also damage the tensioner mechanism. Also often break plastic linings on the hinges, if you pull the pillow at the wrong angle.
Do not forget that the seating on the Skoda Octavia A7 sensitive to sharp edges. When carrying removed elements on the floor or stairs, use a soft bedding. Even a small pebble in a jacket pocket can leave a scratch on the expensive fabric.
- π« Donβt pull the seat belt if itβs stuck.
- π« Do not leave the removed elements in the sun without protection.
- π« Do not use metal tools to smear.
- π« Donβt ignore signals about twisted wires
If you feel that the mechanism is not amenable, stop and check if all the locks are released. Sometimes it is enough to shake the part a little to release the jammed hook.
Before you lay the removed back on the floor, place an old blanket or rug under it to avoid contamination and damage to the upholstery from dust or dirt in the trunk.
Precautions for the carriage of goods
After rear seats The trunk space is expanding, but new risks are emerging. The load can be displaced by sharp braking, so it must be reliably fixed. Use special nets or belts that usually come bundled with the car to ensure the load does not damage the rear shelf or rear window.
When loading long items, make sure they donβt press on body elements or wiring laid in niches. Never leave sharp objects unpacked near the wiringVibration can cause a short circuit. Also note that the lack of seats changes the center of gravity of the car, so drive it more smoothly.
During the cold season, plastic becomes brittle, so be especially careful when removing and installing elements. Do not allow moisture to enter the fastening mechanisms, as this can lead to corrosion of the metal and jamming of the nodes.
Correct fixation of cargo in the trunk with the dismantled seats is a guarantee of safety for you and your passengers, since unsecured objects in case of an accident turn into dangerous shells.
FAQ: Answers to popular questions
Can I remove the seats if there are children in the car?
No, it's strictly forbidden. Removing seats deprives passengers of seating space and seat belt protection, which violates traffic rules and creates a mortal danger.
Do I need to disconnect the battery before removing the seats?
No, it is not necessary to turn off the battery, as the seats do not have active electronic systems that require de-energization during dismantling. Be careful with heating wires.
How do you put the back back back together?
First, insert the bottom latches into the floor slots, then gently lower the top until you hear the click of the top hooks. Check the reliability of the fixation by pulling the back.
What to do if the seat belt is stuck after installation?
Don't try to pull it out by force. Remove the backrest again, free the belt with a plastic card and reset, making sure it passes through the guide evenly.
How long does it take to remove all the seats?
Experienced owner. Skoda Octavia A7 It takes about 5-7 minutes to completely remove the lower pillow and both parts of the back without tools.