Icon Skoda is not just a design element, but a brand symbol that makes the car stand out on the road. However, there are situations when it needs to be removed: to paint the hood, replace it with a tuned version, or repair it after an accident. Unlike many competitors, the Czech manufacturer uses different methods of attaching emblems depending on the model and year of manufacture.
Removing a logo seems like a simple task, but without knowing the nuances, it’s easy to damage the paintwork or the plastic element itself. For example, on Octavia A7 the emblem is attached with double-sided tape, and on Kodiaq - on special latches. In this article we will analyze all dismantling methods, suitable tools and typical mistakes, which even experienced car owners admit.
Why you may need to remove the Skoda emblem
Reasons for removing a logo range from practical to aesthetic. Here are the most common:
- 🔧 Hood painting. When partially or completely painted, the emblem is removed so as not to spoil it with varnish and create an uneven layer.
- 💥 Repair after an accident. Even with minor damage to the hood, the logo often suffers or interferes with the alignment of the surface.
- 🎨 Tuning. Many owners replace the standard icon with RS version, LED emblem or remove it completely for a minimalist look.
- 🔄 Replacement with original. Over time, the plastic becomes dull and the paint on the logo peels off—a new element needs to be installed.
On models Skoda Fabia and Rapid The emblem is often attached to an adhesive backing, which loses adhesion over time. In this case, dismantling is necessary for re-fixation. And on Superb and Kodiaq The logo may interfere with the installation of additional accessories, such as 360° cameras.
- For painting
- Due to damage
- For tuning
- Replacement with a new one
- Other
Tools for removing Skoda badge: what you need
Before starting work, prepare the necessary equipment. Lack of the right tools is the main reason damage to paintwork or the logo itself. Here is the minimum set:
- 🔹 Plastic pick or paddle. The best option is a kit for dismantling car panels (sold at any auto store). Metal objects must not be used!
- 🔹 Construction or industrial hair dryer. Needed to heat up the adhesive base (relevant for models up to 2015).
- 🔹 Electrical tape or masking tape. Protects paint from accidental scratches.
- 🔹 Degreaser (for example, WD-40 or alcohol). Removes adhesive residues after dismantling.
- 🔹 Thin gloves. Protect your hands from sharp plastic edges and heated surfaces.
For models Skoda Octavia RS and Kodiaq Sportline may be needed special key for latches (included with some shooting kits). If the emblem is bolted on (rare, but found on older Felicia), prepare TORX T20 or Phillips screwdriver.
⚠️ Attention: Do not use knives or screwdrivers to pry off the emblem. Even slight metal pressure leaves microcracks in the varnish, which rust over time.
Clean the surface of the hood from dirt|Apply masking tape around the logo|Prepare a hair dryer and picks|Wear gloves|Check the temperature of the hood (do not work on cold metal)-->
Methods of attaching Skoda emblems: how to determine yours
The method of dismantling depends on how the badge is secured. U Skoda Three main types of fastenings are used:
| Mounting type | Car models | Features of dismantling |
|---|---|---|
| Double sided tape | Fabia (2010–2020), Rapid (2012–2023), Octavia A5/A7 | Requires heating with a hairdryer. The tape is removed with a degreaser. |
| Plastic latches | Kodiaq, Karoq, Superb (2015–present) | You need to carefully snap it off with a pick from the inside. |
| Bolts or screws | Felicia, Praktik, early Octavia A4 | Unscrew with a TORX or Phillips screwdriver. Often hidden under a decorative plug. |
| Combined (glue + latches) | Enyaq, Scala, Kushaq | First, the clips are snapped off, then the adhesive base is heated. |
To determine the type of mount on your model, look at the side of the emblem. If you can see a gap between the logo and the hood, these are most likely latches. If there is no gap, and when you press the icon it does not move, it is glue. On Skoda Yeti and Roomster sometimes occurs hidden magnetic mount, which simplifies dismantling.
How to check the type of fastening without the risk of damaging the emblem?
Gently pull the logo up on both sides. If it gives in by 1–2 mm, these are latches. If it doesn't move, it's glue. Magnetically secured, the emblem comes off easily when pulled upward without tools.
Step-by-step instructions: how to remove an adhesive-based Skoda emblem
This method is suitable for most modern models, including Octavia, Fabia and Rapid. The main rule is take your time and heat the glue evenly.
Clean the surface of the hood around the emblem from dirt and dust. Use a lint-free cloth and degreaser.
Apply masking tape around the perimeter of the logo, spacing 1-2 cm. This will protect the paint from accidental scratches.
Turn on the hair dryer at medium power (temperature ~60–80°C) and heat the emblem evenly for 2–3 minutes. Keep the hairdryer at a distance of 10-15 cm so as not to overheat the plastic.
Take a plastic pick and carefully pry the logo from one corner. If the glue does not yield, heat for another 1-2 minutes.
When the emblem begins to come away, slowly pull it up, using a hairdryer to heat it evenly from below. Do not pull sharply - glue may remain on the hood or tear the plastic.
After removal, remove the residue and glue from the hood with a degreaser. If you plan to reinstall the emblem, clean the base as well.
On Skoda Kamiq and Scala the adhesive base is sometimes combined with a magnetic layer. In this case, after warming up, the emblem comes off easier, but may “stick” back - keep it away from the hood after removal.
⚠️ Attention: Do not use acetone or solvents to remove adhesive! They will damage the paintwork. The best option is specialized cleaners, for example, 3M Adhesive Remover.
If the emblem does not come off after warming up, try pulling it up using a thin fishing line or dental floss threaded under the edge. This distributes the force evenly and reduces the risk of damage.
Removing the emblem on the latches: nuances for Kodiaq and Superb
On crossovers Skoda Kodiaq and sedans Superb The logo is attached to plastic clips, which break if removed carelessly. It's important to know here latch locations:
- 📍 Two latches on the sides (left and right).
- 📍 One or two latches at the bottom (under the logo).
Removal instructions:
Cover the emblem with masking tape, leaving small “windows” for access with a pick.
Gently pry the logo from the side (for example, on the right side) and pull up slightly. You should hear a click - this is the first clip snapping off.
Repeat on the opposite side. Do not pull the emblem too hard - the side fasteners should snap off first.
After the side latches, carefully pry up the bottom of the logo. An additional clip is often hidden here.
When all the latches are released, remove the emblem and inspect the clips for damage. Broken fasteners can be replaced with new ones (item number for Kodiaq —
5E0 853 701).
On Skoda Karoq latches are more fragile, so it is recommended to use special clip remover (sold in kits for removing car panels). If the emblem does not budge, do not use force - it is better to check again whether all the latches are latched.
On models with latches, never heat the emblem with a hairdryer! The plastic of the clips is deformed by high temperatures, and they will no longer fix the logo after reinstallation.
What to do if the Skoda emblem is bolted
This type of mount is rare, but if your car is Skoda Felicia (1994–2001) or early Octavia A4 (1996–2004), most likely the logo is fixed with screws. Here's how to remove it:
Inspect the emblem for decorative caps. On Felicia they are often hidden under the top of the logo (pull it up).
Under the plugs you will find screws
TORX T20or cruciform. Use the appropriate screwdriver.Unscrew the screws counterclockwise. Do not use excessive force - the threads in the plastic will break off easily.
After removing the screws, gently pull the emblem up. Sometimes there is an adhesive pad underneath - remove it with a degreaser.
On some copies Skoda Praktik the bolts may be rusted. In this case, use a penetrating lubricant (for example, WD-40) and let it sit for 10-15 minutes before unscrewing.
⚠️ Attention: If the screws do not come out, do not try to drill them out! Contact the service - the craftsmen use special extractors for cut bolts.
Typical mistakes when removing the Skoda emblem and how to avoid them
Even experienced car owners make mistakes that lead to damage to the logo or hood. Here are the most common:
- 🔥 Hairdryer overheating. Temperatures above 100°C will deform the plastic of the emblem and may cause paint to bubble onto the hood. Keep the hairdryer at a distance and use the medium setting.
- 🔪 Using metal tools. Screwdrivers and knives scratch the varnish. Only plastic picks!
- 💨 Sudden movements. If you pull the adhesive-backed emblem, it may break in half. Pull slowly and evenly.
- 🧴 Aggressive solvents. Acetone and gasoline ruin paint. Use only specialized cleaners.
- 🔩 Lost screws or clips. When disassembling, place all parts in one container so as not to lose them.
On Skoda Enyaq and other electric vehicles of the brand, system sensors may be located under the emblem Travel Assist. When dismantling, do not damage their wiring - this will lead to errors in the on-board computer.
What should I do if the emblem breaks during removal?
If the logo is cracked or split, do not attempt to glue it back together; it will not form a seal. Order a new emblem (original items: 5E0 853 701 for Kodiaq, 3U0 853 701 for Octavia). The cost of the original is from 1,500 to 3,000 rubles. An alternative is high-quality replicas from Heko or 3D printing.
FAQ: Frequently asked questions about removing the Skoda emblem
Is it possible to remove the Skoda emblem without a hair dryer?
Yes, but it's risky. Without heating, the adhesive base is removed with great force, which can damage the logo or paint. An alternative is to use thread or fishing line, passing it under the emblem and carefully separating it from the hood with sawing movements. However, it will take longer.
How to remove the emblem on a Skoda Octavia RS if it is LED?
LED emblems (e.g. on Octavia RS 2020+) are secured with latches, but have an additional power connector. Before dismantling, disconnect the negative terminal of the battery, then carefully disconnect the connector from the back of the hood. Do not pull on the wires - they are fragile!
Will marks remain after removing the emblem?
If the emblem was adhesive-based, traces of glue may remain on the hood. They need to be removed with a degreaser. On models with latches, no traces are left, but careless dismantling may cause microcracks in the varnish. To avoid this, use protective tape and plastic tools.
Is it possible to put the emblem back on the same glue?
No, old double-sided tape loses its properties after dismantling. To reinstall, buy a new one 3M automotive tape (for example, 3M VHB) or plastic glue (Loctite). Before gluing, degrease both surfaces.
Where to buy a new Skoda emblem if the old one is broken?
Original emblems can be ordered from an official dealer (price - 1,500–3,000 rubles) or in online stores (Exist.ru, Autodoc). Alternative - replicas from Heko (from 800 rubles) or 3D printing. LED emblems from Oracle Lighting or Morimoto.