Electric side mirrors ŠKODA Karoq is one of those functions that seems intuitive until you encounter it for the first time. Especially if you moved from a car without electrical adjustment or took a used car where the previous owner disabled the option in the settings. In this article we will look at all the ways to activate mirrors - from basic mechanics to hidden functions of the multimedia system Amundsen or Columbus.

It is important to consider that the inclusion algorithm depends on the year of manufacture and configuration Karoq. For example, in models 2017–2020 gg. with button MIRROR FOLD on the driver's door the logic is different from the restyled versions 2021+, where the controls were put in the menu CAR. We have collected current data for all generations, including rare cases when mirrors “do not respond” to commands.

Where is the mirror activation button on the ŠKODA Karoq

In 90% of cases, the problem is solved by pressing one key - but its location varies. In basic configurations Karoq Active or Ambition The mirror control button is integrated into the adjustment unit on the driver's door. Look for her under the position adjustment joystick - usually this is a round switch with a mirror icon and arrows.

In top versions (Style, Sportline) a separate key has been added FOLD/UNFOLD for folding mirrors. It could be:

  • 🔘 On the door panel — to the right of the glass adjustment block (typical for pre-restayl).
  • 🔘 On the center console — next to the seat heating buttons (in cars with the option Keyless).
  • 🔘 In the media menu - in sections CAR → Comfort → Mirror Folding (relevant for Karoq 2021–2026).

If there is no physical button, check the presence of the function in the on-board computer. To do this:

  1. Clamp MENU on the steering wheel (or touch the screen Amundsen/Columbus).
  2. Go to Settings → Car → Comfort.
  3. Look for the item Folding mirrors (Mirror Folding).
📊 What ŠKODA Karoq do you have?
  • pre-facelift (2017–2020)
  • Restyle (2021–2026)
  • I don't know the year of manufacture
  • Other model

Step-by-step instructions: how to turn on the mirrors manually

If the mirrors do not respond to the buttons, first make sure that:

  • 🔋 The battery is charged (at low voltage the electric drives are blocked).
  • 🔑 The ignition is on (enough position ACC).
  • 🚪 The driver's door is closed (on some versions the mirrors do not work when the door is open).

Next, follow the algorithm:

☑️ Check before turning on mirrors

Done: 0 / 3
  1. Find the adjustment joystick on the driver's door (usually to the left of the window).
  2. Turn the selector to position L (left mirror) or R (right).
  3. Press joystick up/down/left/rightto change the tilt angle.
  4. For folding (if there is a function) hold the button FOLD 2–3 seconds.

If the mirrors do not move, check fuse F36 (10A) in the fuse box under the steering wheel. B Karoq he is responsible for the electric drive chain. If it burns out, replace it with a similar one (color red).

💡

In machines with function Memory Seats The mirrors can be reset to the "zero" position when the door is opened. To disable this, go to Settings → Driver profile → Reset mirrors and deactivate the option.

Automatic folding mirrors: setting via menu

B ŠKODA Karoq with multimedia system Amundsen or Columbus The mirrors can be programmed to automatically fold when the alarm is set. To do this:

  1. Turn on the ignition (position ON).
  2. Click MENU on the screen or button CAR on the center console.
  3. Select Settings → Vehicle → Comfort → Folding mirrors.
  4. Activate the option Auto fold when locked (Auto Fold on Lock).

Once activated, the mirrors will automatically fold when:

  • 🔒 Setting the alarm from the key fob.
  • 🚗 Locking the car with the button on the door (if Keyless).
  • 📱 Using the mobile application ŠKODA Connect.

To open the mirrors when unlocking, activate an additional option Auto-unlocking when unlocked (Auto Unfold on Unlock).

What if mirrors are folded arbitrarily?

This can be caused by a failure in the Comfort Unit (BCM). Try resetting to factory settings via the menu Settings → System → Reset settings. If the problem persists, a scanner diagnosis is required (e.g., VCDS) for module errors 42 – Door Electr.

Common mistakes and their solutions

Even in the proper Karoq Mirrors may not work because of small things. Here are the typical scenarios and ways to eliminate them:

Problem Possible reason Solution
Mirrors don't respond to joystick F36 fuse or wiring break in door Check the fuse, inspect the wire harness in the corrugated between the door and the counter
Mirrors are folded only by hand. Option disabled. Auto Fold in the menu Activate the function via Settings → Comfort
Mirrors shivering or moving jerks Wear of the drive mechanism or ingress of moisture Lubricate the guides with silicone lubrication or replace the motor
Mirrors don't remember the position. Failure in the seat memory unit (J528) Reset the driver profile settings or update the software through ŠKODA- Dealer.

In the 2023 Karoq models with the system Virtual Cockpit Mirror settings can be blocked when active VALET MODE. To unlock, hold the button. SETUP on the wheel 10 seconds before the message appears Service Mode Off.

💡

If the mirrors stopped working after washing or raining, the contacts in the door connectors are likely to corrosion. Dry them with a hair dryer (cold air) and treat them WD-40 Contact Cleaner.

How to turn on the heating of mirrors

Heated side mirrors ŠKODA Karoq activated automatically when the rear window is heated. For this:

  1. Turn the key to position ON (or click START/STOP without starting the engine).
  2. Press the rear window heating button (pictogram with wavy lines).
  3. After 5-10 minutes, check the mirrors with your hand – they should be warm.

If the heating does not work:

  • 🔌 Check the fuse F29 (15A) in the block under the hood.
  • 🔍 Inspect the heating elements on the inside of the mirrors (seen through the glass) – they should not be damaged.
  • 📡 Diagnose the control unit J386 (Door Control Unit) for errors.
⚠️ Attention: Do not use a scraper to clean the icing mirrors with the heating turned on – this can damage the heating element. Wait until the ice melts on its own (usually takes 2-3 minutes).

Diagnostics of malfunctions: when to contact the service

If all of the above methods fail, the problem may be:

  • 🔧 Failure of the drive motor (Characteristic crackling when you press a button).
  • 🔌 Broken wiring in the corrugated between the door and the body (often the wires are rubbed).
  • 🖥️ Firmware failure comfort block (BCM).

A diagnostic scanner compatible with VW-Group (for example, VCDS, ODBEleven). Common errors related to mirrors:

  • B1188 Failure of the left mirror drive.
  • B1189 Failure of the right mirror drive.
  • U1121 - lack of communication with the door block.

Repair cost:

  • 💰 Replacement of the mirror motor: 3 000–5 000 ₽ (with work).
  • 💰 Wiring repair: 2 000–4 000 ₽ (depending on complexity).
  • 💰 Flashing BCM: 1 500–3 000 ₽.
⚠️ Attention: In some cases, a faulty mirror may be a symptom of a more serious problem, such as corrosion in the fuse block under the hood. If the windows or the central lock stop working with the mirrors, contact the service immediately.

FAQ: Frequent questions about mirrors on ŠKODA Karoq

Can I replace the mirror motor myself?

Yeah, but it's gonna take a partial disassembly of the door panel. For this:

  1. Remove the plastic door trim (snap off the clips with a screwdriver).
  2. Disconnect the mirror power connector.
  3. Turn away 3 bolts of motor attachment (star). T20).
  4. Install a new motor and put everything back together.

The cost of the original motor (article) 5Q0857561/5Q0857562) - about 2 500 ₽.

Why do mirrors only fold when holding a button?

This is normal behavior for Karoq optionally Auto Fold. To activate automatic folding, it is necessary:

  1. Update the firmware of the comfort unit (BCM) at the dealer.
  2. Or install an additional module (for example, MirrControl) if your equipment does not support the function.
How to reset mirror settings after battery replacement?

After removing the battery terminals, the mirrors can be dropped to the "zero" position. To return the previous settings:

  1. Turn on the ignition.
  2. Adjust the mirrors to the desired position with a joystick.
  3. Press and hold the button M Memory is on the adjustment unit for 3 seconds until the signal sounds.

If the buttons M No, the settings will be saved automatically after the ignition is turned off.

Can I install an electric mirror if it was not from the factory?

Technically yes, but it is a labor-intensive process. You will need:

  • Replace mirrors with motor versions (articles) 5Q0857507/5Q0857508).
  • Lay the wiring from the door block to the comfort block.
  • Activate the function through diagnostic software (VCDS).

Cost of work in the service: 15 000–25 000 ₽.

Why do mirrors not fold in the cold?

B Karoq Protection against overloading of the drive at low temperatures. If it's down the street -15°CMirrors may not fold up until the car warms up. To fix the problem:

  • Start the engine and let it run for 5-10 minutes.
  • Or fold the mirrors by hand, holding the button. FOLD 5-7 seconds.