Paint code 2R2R One of the most popular shades in the lineup SkodaThis often raises questions from owners. This color is known as The Brown Red Metallic (Maroon Red Metallic)It has been used on many brand models, including Octavia, Superb and Kodiaq. However, it can be difficult to find accurate information about its composition, analogues and application features, especially if it is a restoration or local repair.

In this article we will analyze not only the official data from the manufacturer, but also practical aspects: how to choose the right paint, what mistakes are most often made when coloring, and why even the original code 2R2R It can give different shades on different details. And also – we will reveal the secrets of how to save on painting without losing quality.

What does Skoda paint code 2R2R mean?

Code 2R2R - this is the internal color designation in the catalog Skoda, which stands for Maroon Red Metallic (In Russian sources, it is often translated as “burgundy-red metallic”). This shade belongs to the group. metallicThis means that aluminum pigments are present, which give depth and “play” color depending on the lighting.

It is important to understand that the code 2R2R It can vary slightly in tone depending on:

  • 🔹 Year of car production - for example, on Skoda Octavia A5 (2004–2013) The shade is darker than the Superb III (2015–2023).
  • 🔹 Manufacturer - paint for European and Indian models (for example, Skoda Slavia) may differ in composition.
  • 🔹 Coverage type - base layer (basecoat) and varnish (clearcoat) affect the final view.

Interesting fact: in some catalogs VW Group (which includes Skoda) the colour is indicated as LA7W or 2R This is not a mistake, but alternative codes for the same shade. However, when ordering paint, it is better to use it. 2R2Rto avoid inconsistencies.

⚠️ Attention: If your car is painted in 2R2R Before 2010, it was likely that lead pigment was used in the paint. When grinding such coatings, be sure to use a respirator with a filter. P3 — dust is toxic!

Official characteristics of 2R2R paint

According to technical documentation Skodapaint 2R2R has the following parameters:

Parameter Meaning
Paint type Metallic (2-layer system: base + varnish)
Color code (RGB) #6B1A1A (approximately)
RAL compliance The nearest RAL 3005 (Cherry red), but not a complete analogue!
Manufacturer of LCM PPG, BASF (Original suppliers for the Skoda)
Layer thickness (recommended) Base: 15-20 μm, varnish: 40-50 μm

The peculiarity of this shade is a high sensitivity to the application technology. For example, if you apply the base layer too thick, the color will look “dirty”, and if too thin – the ground will appear. Optimal option: 2-3 layers of the base with interlayer drying for 5-10 minutes at temperature 20–25°C.

For comparison: competitors have similar shades are designated as follows:

  • 🔴 Volkswagen: LA7W (Same color, but may differ in lightness).
  • 🔴 Audi: LZ8Y (more saturated red).
  • 🔴 Seat: 2R or LM7W.
📊 What color is your Skoda?
  • 2R2R (Bordeaux-red)
  • Black
  • Gray
  • Blue
  • Other

How to choose an analogue of 2R2R paint?

If the original paint Skoda Inaccessible or too expensive, you can use analogues from other manufacturers. The main thing is to consider not only the color, but also pigment (The metallic material requires a precise match in the size of the aluminum scales.)

The best analogues according to reviews from masters:

  1. Mobihel (Code): 2R2R or SKD-2R2R) - the most accurate in color, but requires mandatory coating with varnish Mobihel 2K Clear.
  2. Sikkens (Code): U3550) - slightly lighter than the original, but falls well on the plastic.
  3. DuPont (Code): D8227) - premium variant with improved resistance to UV.
  4. Vika (Code): VK-2R2R) is a budget equivalent, but may require a color adjustment.

When selecting an analogue, it is necessary:

Compare the code on the bank with the original 2R2R

Clarify the year of release of the car (color may change)

Check compatibility with your soil type

Buy a sampler (50-100 ml) for the test on unnecessary parts

Tip: If you paint locally (such as a bumper), use it transition over varnish This will help to hide the difference in shades. To do this, after applying the base, spray the varnish with a slashing on 30-40 cm outside the border of the repair zone.

⚠️ Attention: Paints Mobihel and Vika often faked! Check for a hologram on the jar and buy only from authorized dealers. Counterfeits may turn yellow after 6–12 months.

Painting technology: step-by-step instructions

Painting a car in color 2R2R requires strict adherence to technology, especially if you work with metallics. Here is a step-by-step algorithm for garage conditions:

1. Surface preparation

  • 🧽 Clean the part from dirt and grease using Anti-Silicone.
  • 🔧 Remove rust (if any) mechanically or with a converter Fertan.
  • 🖌️ Fill the dents with polyester putty (for example, 3M™ Bondo).

2. Priming

Use epoxy primer (for example, PPG DP40/DP40LF) for better adhesion. Apply 2 layers with drying time between coats for 15 minutes. For plastic parts (bumpers), pre-apply Plastic Primer.

3. Applying base (2R2R)

Key points:

  • 🎨 Thin the paint according to the instructions (usually 2:1 with diluent).
  • 🌡️ The room temperature should be 20–25°C, humidity - no higher than 60%.
  • 🔄 Apply 2-3 coats at 5-10 minute intervals. Keep the gun at a distance 20–25 cm.

4. Varnishing

Use 2K varnish (for example, Sikkens Autoclear LV). Apply 2 layers: the first - “wet on wet”, the second - after 10 minutes. For gloss add 10% Hardener.

5. Polishing

After 24 hours, polish the surface with paste 3M™ Perfect-it™ with abrasive 2000–3000 grit. This will remove possible shagreens and add depth to the metallic.

What to do if the paint runs?

If drips appear after painting, do not try to sand them right away - wait until they dry completely (48 hours). Then carefully cut off the drip with a blade at an angle of 30°, sand it with sandpaper P1200 and polish. If the defect is deep, the part will have to be repainted.

Common mistakes when working with 2R2R and how to avoid them

Even experienced painters sometimes make mistakes when working with metallics, especially with such a capricious shade as 2R2R. Here are the most common mistakes and ways to prevent them:

1. Incorrect selection of thinner

Using a thinner that is too fast (for example, for hot weather) will cause the metal flakes to lie chaotically and the color will look dull. For 2R2R optimal thinner average speed (for example, PPG DT870).

2. Failure to comply with interlayer drying

If you apply layers of base without a pause, the paint will “boil” and microbubbles will appear, which will ruin the texture. Minimum drying time between coats - 5 minutes at 20°C.

3. Ignoring test spray

Always do a test spray on cardboard or an unwanted part! Color 2R2R may “turn” red or brown depending on the lighting in the box. In daylight it looks richer than under fluorescent lamps.

4. Saving on varnish

Cheap varnishes (for example, Chinese 1K) turn yellow after 1–2 years and spoil the appearance of the metallic. For 2R2R better use URETHANE-varnish with a UV filter (for example, Spies Hecker Permahyd 2K).

💡

If you are painting the bumper, preheat it with a hair dryer until 40–50°C. This will improve the adhesion of the plastic and prevent the paint from peeling off.

Where to buy original 2R2R paint?

Original paint 2R2R can be purchased from official dealers Skoda or in specialized paint and varnish stores. However, prices there are often inflated. Alternative options:

1. Official dealers

  • 🔹 Pros: 100% color match, quality guarantee.
  • 🔹 Cons: price from 1,200 rubles/l, long wait (if the paint is out of stock).

2. Online stores

For example:

3. Local suppliers

In large cities there are companies that tint paint according to the code 2R2R on the spot. For example, in Moscow it is "TsvetAvto" or Kohler Center. Average price: 800–1,000 rubles/l.

⚠️ Attention: When purchasing online, check to see if the price includes activator (for 2K inks). Without it, the paint will simply dry, but will not polymerize - and after a month it will begin to peel off.

Tips for caring for 2R2R paint

Color 2R2R requires special care, as metallic is sensitive to scratches and fading. Here are some recommendations:

1. Washing

  • 🚿 Use contactless car wash or a soft sponge with pH-neutral shampoo (for example, Sonax Car Shampoo).
  • 🚫 Avoid brushes and harsh detergents (eg Kärcher with nozzle Dirt Blaster may erase the varnish!).

2. Polishing

Apply once every 6 months protective wax (for example, Collinite 845) or ceramic coating (Ceramic Pro). This will prevent oxidation of the metal flakes and maintain shine.

3. Storage

If the car is parked on the street, use breathable cover (for example, Covercraft). Do not cover the car with film - this leads to condensation and corrosion.

4. Local repair

For minor scratches use corrector pencil (for example, Dr. ColorChip for 2R2R). It is better to repair deep chips at a service center - painting on your own without equipment often produces a noticeable transition.

💡

2R2R paint fades 10-15% faster than standard acrylic colors. To avoid "spotting", apply a UV protective spray (eg 303 Aerospace Protectant).

FAQ: Frequently asked questions about 2R2R paint

Can 2R2R paint be mixed with other colors to adjust the shade?

Yes, but very carefully! To lighten, you can add up to 5% white base (for example, PPG DBC), and for darkening - 2–3% black pigment. However, it is better to entrust the tinting to professionals, since metallic is sensitive to proportions.

Why does 2R2R look dull after painting?

This is a typical problem with:

  • 🔹 Incorrect dilution of paint (too thick or thin).
  • 🔹 Applying varnish without interlayer drying.
  • 🔹 Using cheap varnish without a UV filter.

Solution: polish the surface with abrasive paste (Menzerna PO203S) and apply a high-quality varnish.

What primer is best to use under 2R2R paint?

Optimal for metal parts epoxy primer (PPG DP40), and for plastic - adhesion primer (3M™ Scotch-Weld™). It is important that the soil is gray or dark gray - this will prevent the yellow tint from bleeding through the base.

How many coats of varnish should be applied to 2R2R?

Minimum 2 layers, but for durability 3 is better:

  1. The first layer is “wet on wet” (thin, to fix the base).
  2. The second layer is the main one (apply with 50% overlap).
  3. Third layer (optional) - for additional protection.

Interlayer drying: 10–15 minutes at 20°C.

Is it possible to spray paint a part in 2R2R?

Technically yes, but the result will be worse than with professional painting. If you decide, follow these tips:

  • 🔹 Use a can of metal base and separate varnish (for example, Motip Dupli-Color).
  • 🔹 Apply in thin layers from a distance 25–30 cm.
  • 🔹 After painting, polish the part with paste. Farecla G3.

Expect color may vary by 5–10% from the original.