Owners ŠKODA Octavia A7 (2013–2020) sooner or later they are faced with the need to touch up chips, restore paintwork after an accident, or completely repaint the body. But how not to make a mistake with the shade, if even official dealers make mistakes? This article will help you understand Octavia A7 paint codes, the nuances of enamel selection and application technology, so that the result pleases you for years.
We analyzed data from factory catalogs Škoda, reviews from body repair specialists and tests of coating durability. Here you will find not only tables of original colors, but also unique recommendations for working with metallics and mother-of-pearls, which make up 70% of the model’s palette. And also proven methods of care so that the paint retains its shine and protection from corrosion longer.
Official palette of ŠKODA Octavia A7: color codes and names
Factory palette Octavia A7 includes 18 base shades, of which 12 are metallic or mother-of-pearl. Each color is assigned a unique code, which is indicated on the nameplate under the hood (for example, LA5W for the popular "Quartz grey"). Important: paint codes for Octavia A7 and Octavia A8 (2020+) do not match - even for visually similar shades!
Below is a complete table of original colors indicating the type of coating (acrylic, metallic, mother-of-pearl) and years of production. Please note: some shades (eg. Petrol Blue) were available only in the first batches of restyled models (2017–2018).
| Paint code | Title (Russian/English) | Type | Year of manufacture | Notes |
|---|---|---|---|---|
LA5W |
Quartz Gray | Metallic | 2013–2020 | Most popular (35% of sales) |
U2U2 |
Black magic / Magic Black | Acrylic | 2013–2020 | Requires 3-layer coating |
9U9U |
Candy White | Acrylic | 2013–2020 | Prone to yellowing if not polished properly |
2T2T |
Coral Red | Metallic | 2015–2020 | In the palette since 2015 (replacement 3G3G) |
6Q6Q |
Blue petrol / Petrol Blue | Mother of pearl | 2017–2018 | Out of production, difficult to find an analogue |
⚠️ Attention: Paint codes on the nameplate and in the electronic catalog Škoda may vary! For example, LA5W sometimes referred to in documentation as L5W (without the first letter). Always check the physical label under the hood.
If your color is not in the table, check FAQ section, where we examined rare shades (for example, Velvet Red for special series).
How to choose paint for Octavia A7: 3 proven methods
Even knowing the paint code, you can run into a fake or inaccurate shade. Body shops use a combination of methods to achieve a 100% match. Here is an algorithm that minimizes risks:
- Scanner-spectrophotometer (accuracy 98%). The device reads the shade from the body and selects a recipe for mixing base paints. Cost of service: 500–1500 rubles. Suitable for metallics and pearls.
- Škoda factory catalog (accuracy 90%). Use the code from the nameplate and order paint from official suppliers (for example, PPG or Spies Hecker). For Octavia A7 series are relevant
VW/Audi Group. - Visual selection (accuracy 70%). Only for acrylic flowers (eg.
U2U2or9U9U). Compare samples in daylight at a 45° angle.
🔍 Lifehack: If the paint is selected for local repairs (for example, a bumper), take it with you to the store detail from the inside (for example, a gas tank cap). There, the paintwork fades less and more accurately reflects the original shade.
- By code from the nameplate
- Scanner in the workshop
- Visually in the store
- Ordered from the dealer
- Another way
Octavia A7 painting technology: step-by-step instructions
Painting Octavia A7 requires taking into account the features of the body: aluminum parts (hood, wings) and steel panels have different thermal conductivity, which affects the drying of the enamel. Below is a universal algorithm for garage conditions, adapted for metallics (the most complex option).
Remove rust with a converter (e.g. Fertan)
Fill the dents with polyester putty (for example, Novol Plus 760)
Treat the surface with abrasive P800–P1200 (for metallics - P1500)
Degrease Antisilicon (do not use solvent 646!)
Apply 2 layers of primer (for aluminum - epoxy PPG DP40/DP402)-->
🎨 Application nuances:
- 🔴 Metallic: The first layer is applied by “dry” spraying (pressure 2–2.5 atm), the second by “wet” spraying (1.5–2 atm) for uniform distribution of aluminum flakes.
- 🔵 Mother of pearl: Requires 3 layers with intermediate drying for 10–15 minutes. Use slow drying reducer (for example, Sikkens Autoclear LV).
- ⚫ Acrylic: 2 layers with an interval of 5 minutes are enough. Important! The room temperature should be 20–25°C, otherwise drips may occur.
⚠️ Attention: When painting aluminum parts (hood, fenders) Do not use acidic soil - it causes corrosion. Only epoxy compounds with zinc (for example, PPG DP40LF).
After painting, polishing with an abrasive paste (for example, 3M 05994 3000 grit) to remove orange peel. For mother of pearls, use non-abrasive polishes (for example, Sonax Nano Pro).
If you paint the bumper, first apply an adhesive primer to the plastic (for example, PPG DP60/DP602). Without it, the enamel will peel off in 6-12 months.
Top 5 mistakes when painting Octavia A7 (and how to avoid them)
An analysis of reviews from owners and workshops showed: 80% of paintwork defects after painting are associated with typical errors. Here are the most critical of them, relevant specifically for Octavia A7:
- Improper preparation of aluminum. Hood and fenders Octavia A7 made of aluminum alloy AlSi1MgMnwhich requires special soil. Using a regular acid primer will cause the paint to bubble after 1-2 years.
- Saving on thinner. For metallics Škoda recommends thinner Spies Hecker 8000 (for average temperatures). Cheap analogues (for example, 646th) change the viscosity of the paint, which leads to drips.
- Violation of interlayer drying time. For mother of pearl (
6Q6Q,4H4H) the interval between layers should be 15–20 minutes. Accelerating the process with a hairdryer results in a “cloudy” coating. - Ignoring the test spray. Before painting the entire part, be sure to do a test application on a hidden area (for example, the inside of a door). Color may vary due to fading of the original paintwork.
- Polishing immediately after drying. Metallics and mother-of-pearls take 7–14 days to reach their final hardness. Early polishing will remove the top layer of varnish, leaving the finish matte.
📌 Case from practice: Owner Octavia A7 in color LA5W (Quartz grey) painted the bumper without adhesive primer. After 8 months, cracks appeared at the joints. I had to repaint it with complete removal of the old paintwork.
What to do if the paint has already run?
If drips are noticed in the first 30 minutes, carefully remove them solvent for nitro paints (for example, R-4) and a microfiber swab. If the paint has dried, just sand it (P2000 sandpaper) and reapply the layer.
Caring for Octavia A7 paintwork: how to extend the life of paint
Even perfectly applied paint will lose its shine and protection without proper care. For Octavia A7 It is critical to follow 3 rules:
- Washing. Use the two-bucket method with pH-neutral shampoo (for example, Koch Chemie GREEN STAR). No car washes with brushes - they scratch the varnish!
- Protection. Apply ceramic coating (for example, Ceramic Pro 9H) once every 2 years. Mandatory for metallics and pearls wax polishing every 3 months.
- Storage. Treat the body in winter anti-corrosion spray (for example, Dinitrol 4010) and avoid wet leaves on the hood - they cause micropitting.
🛡️ The secret to durability: For flowers U2U2 (Black magic) and 3G3G (Red Ruby) use UV protective polishes (for example, Sonax Profiline UV-Schutz). These shades fade 20-30% faster than others.
⚠️ Attention: Never wash Octavia A7 in the first 30 days after painting! The varnish has not yet reached its final hardness, and water may cause microcracks. During this period, only dry cleaning with microfiber is allowed.
| Problem | Reason | Solution |
|---|---|---|
| Matte spots on varnish | Acid precipitation (rain, bird droppings) | Rinse immediately with water + neutralize Sonax Neutralizer |
| Yellow stains on white paint | Poor quality polish or wax | Delete clay bar + apply acid-free polish |
| Peeling paint on aluminum parts | No adhesive primer | Repainting with complete removal of old paintwork |
Cost of painting Octavia A7: prices for 2026
The price depends on the scope of work, type of paint and region. Below are the average prices for Moscow and the regions (including materials and labor). For metallics and pearls, the cost is 30–50% higher due to the complexity of application.
| Type of work | Moscow (rubles) | Regions (rubles) | Notes |
|---|---|---|---|
| Local painting (bumper, fender) | 8 000–15 000 | 5 000–10 000 | Includes sanding and polishing |
| Full body painting (acrylic) | 45 000–70 000 | 30 000–50 000 | Without disassembling the interior |
| Metallic painting (1 piece) | 12 000–20 000 | 8 000–15 000 | +20% for mother of pearl |
| Polishing after painting | 3 000–6 000 | 2 000–4 000 | Includes hologram removal |
💰 How to save:
- 🔧 Buy paint yourself from official distributors (for example, PPG or Spies Hecker). The difference with workshops is up to 40%.
- 🖌️ For local repairs use repair pencils (for example, Dr. ColorChip) - cost from 1,500 rubles.
- 📅 Plan your painting for autumn/winter - during this period, workshops offer discounts of up to 20%.
Painting yourself is cheaper, but without experience, the risk of defects is 60%. For metallics and pearls, it is better to trust the professionals.
FAQ: Frequently asked questions about ŠKODA Octavia A7 paint
Is it possible to paint the Octavia A7 in a different color? What is needed for this?
Yes, but you will need:
- Register the color change with the traffic police (provide a receipt for the paint and a work report).
- Completely remove old paintwork (sandblasting or sanding).
- Use insulating soil (for example, PPG K36/K365), if the new color is lighter than the original.
⚠️ Important: When changing a color from dark to light (for example, from U2U2 on 9U9U) will require 3-4 layers of soil to completely cover.
What is the paint code for the 2017 Octavia A7 in Petrol Blue?
For Petrol Blue (mother of pearl) code used 6Q6Q. This shade was only available in 2017-2018. and discontinued. There are no analogues, so for restoration you will have to:
- Order paint according to an individual recipe (from dealers Škoda or in PPG).
- Use a scanner to accurately select the shade.
The cost of such paint is from 5,000 rubles per 1 liter.
What is the difference between the paint of Octavia A7 and Octavia A8?
Main differences:
| Parameter | Octavia A7 (2013–2020) | Octavia A8 (2020–present) |
|---|---|---|
| Paint codes | Start with a letter (for example, LA5W) |
Numeric (for example, Q1Q1) |
| Composition | Water-based (eco-standard VW 50180) | Hybrid enamels (standard VW 50200) |
| Mother of pearl | 3-layer (base + mother of pearl + varnish) | 2-layer (mother of pearl in the base) |
⚠️ Attention: Paints A7 and A8 incompatible! For example, LA5W (Quartz grey) for A7 15% darker than Q1Q1 for A8.
How to remove chips on the hood of an Octavia A7 without painting?
For chips up to 0.5 mm deep:
- Clean the chip degreaser (for example, App Prepare).
- Apply anti-corrosion primer (for example, BODY 960) with a brush.
- Fill in the chip repair varnish (for example, Dr. ColorChip) using an applicator.
- Polish the area with paste 3M 06064 (1000 grit).
🔍 Tip: For flowers LA5W and 4H4H use tinted varnish — it better masks the boundaries of the chip.
Which paint to choose for painting the Octavia A7 bumper?
For plastic bumpers:
- 🔹 Acrylic: PPG D8115 (for
U2U2,9U9U). - 🔹 Metallic: Spies Hecker 5680 + plasticizer SH 5610 (required!).
- 🔹 Mother of pearl: Sikkens Autowave 2K with hardener Sikkens 235.
⚠️ Critical error: Without a plasticizer, the paint will crack in 6–12 months due to the difference in the expansion coefficient of plastic and paintwork.