Replacing wipers with ล KODA Kodiaq - a procedure that every owner of this crossover faces. Not only driving comfort, but also safety depends on the condition of windshield wipers: worn blades leave streaks, do not clean the glass well in rain or snow, and incorrectly selected ones can damage the windshield or drive mechanism. In this article we will analyze all the nuances of attaching wipers to Kodiaq, from standard sizes to replacement features on different generations of the model.
Feature Kodiaq โ use of non-standard fastening hookless a type that many owners confuse with universal U-hook. This leads to the purchase of incompatible brushes or installation difficulties. We will tell you in detail how to determine the type of mount on your car, what sizes of wipers are suitable for Kodiaq 2017โ2026, and we will give step-by-step replacement instructions - with photos and tips for choosing between original brushes ล KODA and analogues from Bosch, Valeo or HELLA.
Wiper wiper sizes for ล KODA Kodiaq: table by year and trim levels
On Kodiaq Wipers of different sizes are installed depending on the year of manufacture and modification. The main difference is the length of the brush on the driver's side: on early versions (2017โ2020) it is shorter than on restyled ones (2021โ2026). At the same time passenger wiper remains unchanged - 500 mm.
Important: even if your car is a 2020 model, but with the option Panoramic Sunroof (panoramic roof), wiper sizes may vary! Below is a table with current data for all versions Kodiaq, including sports Kodiaq RS.
| Year of issue | Modification | Driver's wiper (mm) | Passenger wiper (mm) | Mounting type |
|---|---|---|---|---|
| 2017โ2020 | Basic/Style/Scout | 650 | 500 | Hookless |
| 2021โ2026 | Facelift (all trim levels) | 700 | 500 | Hookless |
| 2020โ2026 | Kodiaq RS | 700 | 500 | Hookless (enhanced) |
| 2017โ2026 | With panoramic roof | 600 | 450 | Hookless (compact) |
โ ๏ธ Attention: On vehicles with the system Rain Sensor (rain sensor) brushes with integrated heating are used. They can be identified by their markings HEATED on the reverse side. Installing conventional wipers on such models will lead to an error in the control unit!
If you are unsure of the size, measure your old brushes with a tape measure or look at the markings on the plastic base. For example, original wipers ล KODA have an inscription 6Q0 955 425 A (driver) and 6Q0 955 426 A (passenger) for versions up to 2020.
Types of wiper mounts on Kodiaq: how not to make a mistake when purchasing
The main mistake when choosing wipers for Kodiaq โ ignoring the type of fastening. This crossover uses hookless system (also known as Push Button or Side Lock), which is visually different from the common U-hook (hook) fastening. If you buy brushes with the wrong adapter, you will have to return them or purchase additional adapters.
Distinguish hookless possible based on the following criteria:
- ๐น There is no metal hook at the end of the wiper arm - instead there is a plastic lock with side latches.
- ๐น The brush is fixed by pressing a button or snapped on the side (depending on the manufacturer).
- ๐น On original brushes ล KODA there is an inscription
HOOKLESSorSIDE LOCK.
- Original ล KODA
- Bosch Aerotwin
- Valeo Silencio
- HELLA EcoWind
- Others
If you buy non-original brushes (for example, Bosch Aerotwin or Valeo Silencio), the kit should include an adapter for hookless. Make sure the packaging says compatible with VW Tiguan or Audi Q7 - these models use a similar mount.
โ ๏ธ Attention: On restyled Kodiaq (2021+) sometimes there is a modified mount with an additional lock. If the new brush does not fit tightly, check for the presence of a plastic tab on the lever - it must be pressed before installation.
Step-by-step instructions: how to remove and install windshield wipers on a Kodiaq
Replacing wipers with Kodiaq takes no more than 10 minutes, but requires care - especially when working with levers that are easily damaged. Below are universal instructions suitable for all generations of the model.
You will need:
- ๐ง New brushes with correct fastening (
hookless). - ๐งด Silicone grease (optional, for processing seals).
- ๐ Tape measure or ruler (to check dimensions).
โ๏ธ Preparing to replace wipers
Step 1: Removing old brushes
- Raise the wiper arm perpendicular to the windshield (service position).
- Press the plastic button (or press the latch) on the back of the brush.
- Pull the brush down, sliding it along the lever. Do not use excessive force - if it does not work, check that all the latches are pressed out.
Step 2. Install new brushes
- Compare the new brush adapter with the old mount. If necessary, adjust the adapter (on some models you need to remove the protective cover).
- Slide the brush onto the lever until it clicks. Make sure the side latches are locked.
- Lower the lever onto the glass and check the operation of the wipers in test mode (turn on the washer).
If the brush does not lock, check to see if the plastic tab on the lever is in the way. On some Kodiaq it must be pressed with a screwdriver before installation.
Step 3: Check and Adjust
After installation, turn on the wipers at minimum speed and observe their operation:
- ๐ The brushes must fit snugly to the glass along their entire length.
- ๐ There should be no "skips" or squeaks.
- ๐ When the washer operates, the liquid is distributed evenly.
If the wipers "bounce" or leave streaks, the reasons may be:
- ๐ซ Wrong size brushes (too long or short).
- ๐ซ Worn rubber bands (even on new brushes!).
- ๐ซ Dirty glass (needs polishing).
Original vs. non-original wipers: what to choose for Kodiaq
Owners Kodiaq often face a choice: buy original brushes ล KODA or save on analogues from Bosch, Valeo or HELLA. Let's look at the pros and cons of each option.
Original wipers ล KODA:
- โ
Guaranteed mount compatibility
hookless. - โ Optimal rubber hardness for windshield Kodiaq.
- โ Long service life (average 1.5โ2 years).
- โ High price on (from 2500 rub. per set).
- โ In some batches there are brushes with defective rubber (they squeak).
Popular analogues:
| Brand | Model | Pros | Cons | Price (set) |
|---|---|---|---|---|
| Bosch | Aerotwin | Silent, aerodynamic profile | More expensive than most analogues | 2000โ2400 rub. |
| Valeo | Silencio | Soft rubber, suitable for winter use | Wear out quickly in frequent frosts | 1500โ1800 rub. |
| HELLA | EcoWind | Budget option, good fit | Creaking at high speeds | 1000โ1300 rub. |
For Kodiaq with the system Rain Sensor it is better to choose original brushes or Bosch Aerotwin โ they do not interfere with the operation of the rain sensor.
If you live in a region with frequent rainfall or frost, pay attention to brushes with winter covering (for example, Valeo Silencio X-TRM). They have special rubber that does not tan in the cold, and a reinforced frame for snow loads.
Common mistakes when replacing windshield wipers on a Kodiaq and how to avoid them
Even experienced car owners sometimes make mistakes when replacing wipers, which leads to breakdowns or poor visibility. Let's look at the most common problems and ways to solve them.
1. Damage to the wiper arm
Levers on Kodiaq are made of aluminum alloy and may bend if subjected to excessive force. Never pull the brush sideways - only down along the lever! If the latch does not budge, check to see if it is jammed with dirt.
2. Size mismatch
Installing wipers of the wrong length leads to:
- ๐จ Incomplete glass cleaning (brushes too short).
- ๐จ They are slapped with slacks or slacks (too long).
- ๐จ Overloading the wiper motor (increased resistance).
3. Ignoring the state of the levers
Before installing new brushes, examine the levers for:
- ๐ง Corrosion (especially in the places of attachment to the motor).
- ๐ง Luft in hinges (leads to "jumping" wipers).
- ๐ง Damage to plastic fixers.
What to do if the wiper is stuck in the raised position?
If the wiper lever does not return to its original position after replacing the brush, check:
1. Installation correctness โ it is possible that the brush is blocking the mechanism.
2. The condition of the lever spring (may be broken).
3. The performance of the wiper motor (when you turn on, is the sound of work heard).
If the engine is in trouble, a diagnosis is required in the service (the error code is usually a problem). B10CD for Kodiaq).
4. Use of incompatible adapters
Some universal brushes are equipped with adapters that are not suitable for hookless- fastenings Kodiaq. For example, an adapter for U-hook It may look similar, but it will not be fixed reliably. Always check the labeling on the packaging!
Caring for wipers: how to extend their service life
Even the best quality brushes will not last long if they are not properly cared for. For Kodiaq It is especially important to monitor the condition of wipers in the off-season, when a mixture of snow, salt and sand gets on the glass.
Care instructions:
- ๐ง Clean your brushes regularly with a wet wipe (especially after off-road travel).
- โ๏ธ In winter, before turning on the wipers, knock the ice off the glass with a plastic scraper.
- ๐งด Once a month, treat rubber with silicone lubricant (prevents cracking).
- ๐ฟ Use high-quality washing liquid (cheap analogues contain aggressive surfactants).
What not to do:
- ๐ฅ Dry wipers with a hair dryer or next to a heater (rubber loses elasticity).
- ๐งผ Wash brushes with detergents based on alkali (for example,
Fairy). - ๐ง Bending the metal frame of the brush for "best fit".
If the wipers began to creak, try to wipe their rubber part with medical alcohol - this will remove silicone deposits from poor-quality washing.
Average service life of wipers Kodiaq:
- ๐ Original: 18-24 months.
- ๐ Bosch Aerotwin: 12-18 months.
- ๐ Budgetary analogues: 6-12 months.
Where to buy wipers for ล KODA Kodiaq: proven options
When purchasing wipers for Kodiaq It is important to avoid counterfeits, especially when it comes to original parts. Below are proven sources with quality assurance.
1. Official dealers ล KODA
Pros:
- โ 100% original spare parts with a guarantee.
- โ Possibility of verification by VIN code.
Cons:
- โ Prices are 20-30% higher than those of unofficial suppliers.
- โ Limited range of analogues.
2. Online auto parts stores
Recommended sites:
- ๐ Exist.ru A wide range of original and non-original brushes.
- ๐ Autodoc - convenient selection according to the model of the car.
- ๐ Emex - wholesale prices when buying a set.
3. Marketplaces (with caution!)
On Wildberries, Ozon or Yandex Market You can find wipers cheaper, but the risk of running into a fake is high. When buying, pay attention to:
- ๐ Photos (especially for packaging)
- ๐ Availability of certificates of conformity.
- ๐ Guarantee from the seller (at least 6 months).
4. Accessories shops (e.g., AutoSpetsCenter)
Suitable for purchasing analogues ()Bosch, Valeo). Before traveling, check by phone the presence of brushes with fastening hookless for VW Tiguan (This ensures compatibility with the Kodiaq).
FAQ: Frequently asked questions about wipers on the ล KODA Kodiaq
Can I put the janitors longer than the standard ones? For example, 750 mm instead of 700 mm?
No, this will lead to:
- ๐ซ Brush hits the windshield rack.
- ๐ซ Overload the wiper motor (increased resistance).
- ๐ซ Uneven cleaning (the edge of the brushes will "hang" in the air).
The maximum permissible deviation from the standard size is ยฑ20 mm.
Why do new wipers squeak on Kodiaq?
Causes of squeaking:
- ๐ Poor quality tires (especially cheap analogues).
- ๐ Contamination of glass or brushes (try to clean with alcohol).
- ๐ Incorrect attachment (brush skewed).
- ๐ Wear of graphite coating on glass (polishing is needed).
Solution: treat brushes with silicone lubricant or replace them with Bosch Aerotwin (They have a special cover).
What is the original article of the wipers for the Kodiaq 2023?
For Kodiaq 2021โ2026 (facelift):
- ๐ Driver:
6Q0 955 425 B(700 mm). - ๐ Passenger:
6Q0 955 426 B(500 mm).
For versions with heating, a suffix is added HEATED (for example, 6Q0 955 425 B HEATED).
Can I wash the wipers in the dishwasher?
No! This will lead to:
- ๐ซ Deformation of rubber due to high temperature.
- ๐ซ Corrosion of metal parts of the frame.
- ๐ซ Loss of graphite coating (if any).
The best way to clean: warm water with car shampoo and a soft brush.
What if the janitor on the Kodiaq is working in jerks?
Possible reasons:
- Wearing brushes (replace with new ones).
- Getting dirt into the mechanism of the lever (needs cleaning).
- Failure of the wiper motor (code of error)
B10CDorB10CE). - Oxidation of contacts in the control unit (diagnosis is required).
First, try removing the brushes and checking the smoothness of the levers manually.