Rear right wing of Škoda Octavia A5: how to choose, replace and save

Škoda Octavia A5 is one of the most popular models of the Czech brand, known for its reliability and practicality. However, even such a car is not immune from damage to the body, especially the rear wing. The right rear fender most often suffers from an accident, bad parking or corrosion. In this article we will analyze all the nuances: from choosing a spare part to replacing it yourself.

We analyzed market offers, owner reviews and technical features of the model to provide up-to-date information. Here you will find a comparison of original parts and analogues, step-by-step dismantling instructions, as well as tips on anti-corrosion treatment. We will pay special attention to typical replacement errors that can lead to problems with body geometry or electronics.

Original wing vs analogues: what to choose for Octavia A5?

The first question that owners have is whether to buy an original part from Škoda or a suitable equivalent. Original rear right fender for Octavia A5 (article 6E6807101/6E6807101A) guarantees a perfect fit and factory quality metal, but its price can reach 25,000–35,000 rubles depending on the supplier. Main advantages:

• 🔹 Exact match to body geometry - no adjustment required
• 🔹 Factory anti-corrosion treatment (galvanizing)
• 🔹 Guaranteed compatibility with fasteners and electronics

Among analogues, parts from Febi (article 26386), Hutchinson and Polcar. Their cost is 30–50% lower, but there are nuances:

• ⚠️ There may be deviations in the thickness of the metal (usually 0.1–0.3 mm thinner than the original)
• ⚠️ Additional anticorrosive treatment is required
• ⚠️ There may be no holes for parking sensors (if installed)

Important: when purchasing an analogue, be sure to check availability certificate of conformity and compare articles with catalogs ETKA or Elcats. Some Chinese manufacturers (for example, Parts-Mall) offer parts at a price of 8,000 rubles, but their quality often causes complaints - the metal can rust within a year.

Technical features of the rear right wing Octavia A5

Rear wing design Octavia A5 (body 1Z3, 1Z5) has several key features that are important to consider when replacing:

1. Integrated bumper bracket — on the original wing it is welded, in some analogues it can be removable.
2. Holes for parking sensors — their location depends on the configuration (optional 7Z6 or 7Z7).
3. Reinforcement in the rear pillar mounting area - affects the rigidity of the body.

It is also worth paying attention to color code your car. For example, for a popular color Candy White (code LA9W) a wing with a factory primer is suitable, and for metallic paints (for example, Brilliant Silver, code LY7H) will require additional painting.

Parameter	Original (Škoda)	Analogue (Febi)	Analog (China)
Metal thickness, mm	0,8–0,9	0,7–0,8	0,6–0,7
Weight, kg	8,2	7,9	7,5
Anti-corrosion coating	Zinc + primer	Primer (partially zinc)	Ground only
Warranty	24 months	12 months	6 months

Critical feature: on models with the system Park Assist (optional 7X2) parking sensors are attached to the fender through special clips. When replacing the wing, they must be moved or new ones must be purchased (item no. 6E0919275).

Step-by-step instructions for replacing the rear right wing

Replacing the wing with Octavia A5 Requires precision and tools. If you do not have experience in body work, it is better to contact a service center. However, if you wish, you can do the work yourself. You will need:

• 🔧 Set of sockets and keys (sizes 10, 13, 17 mm)
• 🔧 Clip puller and rivet gun
• 🔧 Welding machine (for welding brackets)
• 🔧 Anti-corrosion mastic (for example, Dinitrol 4941)

Before starting work disconnect the negative terminal of the battery and remove the rear bumper. Next, follow the algorithm:

Take photographs of the location of all fasteners|Mark the weld spots with a marker|Prepare a new wing (check the kit tation)|Cover the interior and adjacent panels with protective film-->

1. Removing the old wing:
   • Unscrew the bolts securing the wing to the arch (3 pcs. under the head at 13).
   • Cut off the weld points where they attach to the stand (use a spotter or drill).
   • Carefully disconnect the wires from the parking sensors (if equipped).
2. Fitting a new wing:
   • Try on the part, check the gaps with the bumper and door (should be 3–5 mm).
   • Weld the brackets (if they are removable).
3. Installation and painting:
   • Secure the wing with bolts and rivets.
   • Treat the seams with anticorrosive and primer.
   • Paint the part in body color (use the color code from the service book).

⚠️ Attention: When welding, do not overheat the metal - this may deform the wing. Optimal mode: current 80–100 A, electrode 2 mm. After welding, be sure to clean the seams from slag and treat them with zinc spray.

Typical replacement mistakes and how to avoid them

Even experienced craftsmen sometimes make mistakes that later lead to problems. Here are the most common:

1. Gap mismatch — if the wing is installed crookedly, the door will cling to it when opening. Solution: use laser level to check the geometry.
2. Poor anti-corrosion treatment — after 1–2 years, pockets of rust may appear. Solution: apply Dinitrol or Waxoyl in 2–3 layers.
3. Damage to parking sensor wiring - leads to an error C1097 on the dashboard. Solution: Test the circuit with a multimeter before assembly.

Another common problem is incorrect painting. If you do not follow the technology (primer, base enamel, varnish), the wing will begin to peel off after six months. The best option: painting in a drying chamber at 60°C.

⚠️ Attention: On models with the system Lane Assist (optional 2QA) a radar can be installed in the rear wing. When replacing a wing, it must be moved, otherwise the system will stop working. Radar part number: 5Q0907564.

Cost of work and spare parts in 2026

Prices for rear right fender for Octavia A5 vary by region and supplier. Below is the current data for Moscow and the regions (as of June 2026):

Part/Work	Moscow	Regions	Note
Original wing (Škoda)	28 000–35 000 ₽	25 000–32 000 ₽	Delivery time: 3–7 days
Analogue (Febi)	12 000–15 000 ₽	10 000–13 000 ₽	Available from most suppliers
Wing painting	8 000–12 000 ₽	6 000–10 000 ₽	Includes primer and varnish
Wing replacement (work)	15 000–20 000 ₽	12 000–18 000 ₽	No painting

Average total cost of replacement including painting:

• 🔹 Original + work: 50 000–70 000 ₽
• 🔹 Analog + work: 30 000–45 000 ₽

Tip: if your budget is limited, you can save on painting by purchasing a wing with a factory primer (for example, from Polcar) and painted it yourself with a spray can. However, the quality of such coating will be lower than professional.

Anti-corrosion treatment: how to protect a new wing?

Even an original wing can rust over time if you don’t pay attention to the anti-corrosion treatment. On Octavia A5 most vulnerable places:

• 🔹 Internal cavity of the arch (moisture accumulates)
• 🔹 Weld seam locations
• 🔹 Mounting holes

Recommended processing scheme:

1. Clean the surface from dirt and old coating (use App Cleaner).
2. Apply rust converter (for example, ASTROhim AC-430) to problem areas.
3. Treat internal cavities oil anticorrosive (for example, Noxudol 700).
4. Apply to external surfaces wax composition (for example, Tectyl 506).

For long-term protection, you can install plastic fender liners (article 6E0805151/6E0805152 for the right side). They will prevent sand and salt from getting on the metal.

Why is rear fender corrosion dangerous?

If the rust is not removed in time, it will spread to the rear pillar and sill. This will lead to a decrease in body rigidity and may cause a refusal to pass a technical inspection. In advanced cases, a complete replacement of the rear part of the body is required, which will cost 150,000–200,000 rubles.

Where to buy the rear right fender for Octavia A5?

When purchasing spare parts, it is important to choose a reliable supplier. Here are the tested options:

• 🔹 Official Škoda dealers - guarantee of an original part, but high price.
• 🔹 Online stores:
  • Exist.ru - a wide range of analogues.
  • Autodoc.ru — convenient selection by VIN.
  • Emex.ru — there are often discounts on originals.
• 🔹 Showdown — you can find a used wing in good condition for 5,000–10,000 rubles, but there is a risk of rust.

When purchasing online, be sure to check:

• Compatibility with your equipment (for example, the presence of holes for parking sensors).
• All fasteners included.
• Return conditions (in case of part discrepancy).

Before paying, ask the seller to send a photo of the part from different angles, especially the attachment points and welds.

FAQ: Frequently asked questions about the rear right fender Octavia A5

Is it possible to install a wing from Octavia A7 on A5?

No, these models have different body geometry. wing from A7 will not fit the mounting holes and arch shape. The exception is some universal analogues, but they need to be customized.

How can I check if they are selling me an original wing?

Original wing from Škoda has:

• Brand logo on the inside.
• Article stamped on metal (for example, 6E6807101A).
• Certificate of conformity with hologram.

You can also check the part by VIN through the service ETKA.

How long does it take to replace a wing in the service?

On average, the work takes 4–6 hours if no additional straightening is required. With painting and drying - up to 2 days. Time is affected by:

• Difficulty in dismantling the old wing (for example, if it is rusted).
• Necessity of welding.
• Type of painting (local or complete).

Is it possible to drive with a damaged fender?

If the damage does not affect the quality (for example, a small dent), then you can. However, there are risks:

• Corrosion will spread to other body parts.
• A damaged fender may catch on the bumper or door.
• In case of an accident, the insurance company may reduce the payment due to a “defective” car.

We recommend that you fix the defect as soon as possible.

Which anticorrosive agent is best to use for Octavia A5?

For internal cavities:

• Noxudol 700 — oil anticorrosive, protects well from moisture.
• Dinitrol 4941 - universal composition for hidden surfaces.

For external surfaces:

• Tectyl 506 — wax protection, easy to apply.
• Waxoyl — long-term protection (up to 3 years).

Before application, be sure to clean the surface from dirt and rust.