Škoda Rapid 2019 trunk lid: complete repair and replacement guide

Škoda Rapid 2019 is a popular sedan with a practical trunk volume of 530 liters. However, the trunk lid (or, as it is often called, the “fifth door”) can become a source of problems: from a banal squeak to serious damage to the lock or gas stops. In this article we will look at everything the owner needs to know. Rapid about the trunk lid: how to remove it, adjust it, replace parts and avoid common mistakes.

Design features of the trunk lid Rapid 2019 (restyled version) include a lightweight plastic internal frame, an integrated electric lock (included in Style and Sport) and improved gas struts. But even with such improvements, the part requires attention - especially after 100,000 km or an accident.

If you encounter a problem (it won’t close, it sags, it creaks) or you just want to understand the device, this material will help you save on service costs. We have collected Articles of original and analog spare parts, step-by-step instructions with photos, as well as tips on prevention - from lubrication of hinges to electrical diagnostics.

Trunk lid arrangement Škoda Rapid 2019: schemes and key elements

trunk lid Rapid consists of several key components, each of which can fail:

• 🔧 External panel — steel or aluminum sheet with paint coating (the color code is indicated on the plate in the trunk).
• 🔄 Loops — two hinge parts securing the cover to the body. On Rapid 2019 hinges with plastic bushings are used (5Q0 827 551/552).
• 💨 Gas struts - keep the lid in the open position. Original article: 5Q0 827 501 A (left) and 5Q0 827 502 A (right).
• 🔒 Castle — mechanical or electrical (depending on the configuration). The electric drive of the lock has an article number 5Q0 827 035 J.
• 🔌 Electrical wiring — wiring harness for number plate illumination, opening button and closing sensor.

Feature Rapid 2019 - integrated into the lid boot-opener (article 5Q0 959 611), which often fails after washing or in wet weather. If the trunk does not open from the button on the key, the problem may be in it.

In complete sets Ambition and Style cover fitted electric drive, which is controlled by a button on the key or from the cabin (near the driver's seat). The mechanical version (basic configurations) opens only with a key or lever under the rear bumper.

What's inside the trunk lid?

Inside the plastic body kit hidden: stiffness amplifier (metal beam), electric drive control unit (if any), wiring for the flashlight backlight numbers and, in some versions, the antenna system Keyless.

Typical faults: why the trunk lid Rapid squeaky

Owners Škoda Rapid 2019 is most often faced with the following problems:

Malfunction	Reason	How to fix
The lid does not open from the button.	Failed sensor in the lock or electric drive	Call the wiring, replace the sensor (5Q0 959 611)
Creak when opening/closing	Wear of plastic bushings in hinges	Lubricate the hinges with silicone lubrication or replace the bushings
The lid sags or falls.	Failure of gas stops	Replace the stops with a pair (see article). above
The lock doesn't lock the lid.	Wear of the locking mechanism or thrust breakdown	Adjust the position of the lock or replace it

One of the most common problems is loop-creak. On Rapid In 2019, it appears after 50,000-70,000 km due to dirt getting into plastic bushings. Ignoring the creak leads to accelerated wear of the hinges and the need for their complete replacement (cost - from 8 000 rubles per pair).

Another "disease" - power-drive In the cold. This is because the lubricant in the mechanism thickens. Solution: before winter to process the drive WD-40 Specialist (Not the usual WD-40!) or special low-temperature lubricant.

How to remove the trunk lid Škoda Rapid 2019: step-by-step instructions with a photo

To remove the cover, you will need:

• 🔧 10 mm socket wrench (for hinges).
• 🔧 Flat blade screwdriver (for removing trim).
• 🧲 Magnet or tweezers (to avoid losing the fastener).
• 👨‍🔧 Assistant (heavy cover, especially with electric drive).

Step 1: Disconnect the battery (required!) to avoid short circuits when working with electrical wiring. Then open the trunk and remove the plastic lining of the lid, dug it with a screwdriver at the fasteners (they are located around the perimeter).

Step 2. Disconnect the wiring:

1. Turn off the number light connector (white plastic fixator).
2. If there is an electric drive, disconnect the tourniquet from the control unit (black connector with 4 pins).
3. Remove the thrust of the lock (it is fastened with a plastic clip).

Step 3. Dismantle the gas stops. To do this, press the lock of the rod of the stop and remove it from the hinge. Be careful, the pressure is under pressure!

Step 4. Unscrew the hinges.. The cover is mounted on 4 bolts (2 for each loop). Ask the assistant to hold the lid while you unscrew the last bolt.

⚠️ Attention: Don’t try to remove the lid alone – it weighs about 15 kg, and without support it can fall, damaging the hinges or paintwork.

Replacement of gas stops: items, prices and nuances of installation

Gas stops (shock absorbers) of the trunk cover Rapid 2019 fails after an average of 80,000-100,000 km. Signs of malfunction:

• The lid falls when opened (not held in the upper position).
• It takes effort to close the trunk.
• The appearance of oil streams on the rod of the stop.

Original accents from VW Group have articles:

• 5Q0 827 501 A - left.
• 5Q0 827 502 A - right.

The cost of a couple is about 3,500–4,000 rubles. Analogues from Sachs or Stabilus They will cost less (2000-2500 rubles), but their resource is lower.

How to replace the stops:

1. Open the trunk lid and fix it with a stop (for example, a wooden bar).
2. Press the locker of the stop rod and remove it from the hinge.
3. Similarly, remove the second end of the stop from the mount on the body.
4. Install new stops, starting with the bottom mount.

⚠️ Attention: Never set the stops one at a time, even if one is still working. Different rigidity of the stops will lead to skewed cover and accelerated wear of the hinges.

Adjustment of the lock and hinges: eliminate the distortion of the trunk lid

If the trunk lid Rapid Closed with difficulty or not fixed by the lock, the problem may be hinge-skew or lock-out. The adjustment takes 10-15 minutes and does not require special tools.

Hinge adjustment:

1. Remove the slacks (do not unscrew them completely!).
2. Raise or lower the lid to level the gaps around the perimeter (they should be the same on the left and right).
3. Tighten the bolts and check the operation of the lock.

Lock adjustment:

• Reduce the two bolts of the lock attachment (under the cover).
• Move the lock in the desired direction (up/down or left/right).
• Check that the tongue of the lock clearly enters the return part on the body.

If the lid does not close after adjustment, check. lock rod It could have jumped or deformed. V Rapid 2019 plastic thrust, and its replacement will cost 300-500 rubles (article) 5Q0 827 561).

Repair of the electric drive of the trunk lid: diagnosis and replacement

Electrical drive of the trunk cover in Škoda Rapid 2019 (completions) Style/Sport) consists of:

• 🔌 Electric motor with gearbox (article) 5Q0 827 035 J).
• 📶 Position sensor (article) 5Q0 959 611).
• 🔋 Control unit (included in the motor).

Typical electric drive faults:

• 🚨 The trunk does not open from the button, but opens with a key - a problem in the sensor or wiring.
• 🔄 The drive buzzes, but the cover does not move - wear gear gear gear gear gear gears.
• ⚡ The drive is triggered by jerks - oxidation of contacts or low voltage.

Diagnostics:

1. Check the fuse F37 (10A) per block SC (under the steering wheel).
2. Call the wiring from the control unit to the button in the cabin (orange-black and brown wires).
3. If the drive does not respond, apply 12V directly to it (red wire - +, black - - -). If the engine is not working, a replacement is required.

Replacing the electric drive will cost 12,000–15,000 rubles (detail + work). If the problem is only in the sensor, its replacement is about 2,500 rubles. In some cases it helps cleaning contacts alcohol control unit.

Care and prevention: how to prolong the life of the trunk lid

To avoid breakdowns, follow these simple recommendations:

• 🧴 Lubricate the hinges 2 times a year (spring and autumn) with silicone grease or Liqui Moly Silber-Fett.
• 🚿 Wash the seal Soapy solution of the trunk cover - this will prevent it from cracking.
• ❄️ in winter Clean the hinges and lock from snow and ice to avoid corrosion.
• 🔋 Check the wiring for oxidation (especially after washing under pressure).

If the trunk lid is often used (for example, for the carriage of goods), check every six months:

• Puffing up the hinges.
• The state of the gas stops (are there any oil streams)
• The ability of the castle (whether there is a backlash in the tongue).

⚠️ Attention: Never slam the trunk lid when closing - this deforms the hinges and leads to distortion. Close it smoothly, pressing your hand.

FAQ: Frequently asked questions about the trunk lid Škoda Rapid 2019

Can I install an electric drive on the mechanical version of the cover?

Technically yes, but this will require replacing the entire trunk lid (as there is no room for the control unit in the mechanical version) and reworking the wiring. The cost of such an upgrade is from 30 000 rubles, which is inexpedient.

How much does it cost to replace the trunk lid at the assembly?

The original (painted) cover will cost you 40,000–50,000 rubles. Analogues from Febi or Hella - about 25 000-30,000 rubles. Note that the replacement will require reconfiguration of the electric drive (if any).

Why does the trunk cover not close after the accident?

Most likely, the hinges or body openings are deformed. In this case, you need to straightening with subsequent adjustment of the lock. It is almost impossible to align the cover after the impact - a slipper is required.

What is the best lubricant to handle the loops?

The best option is Liqui Moly LM 47 (metal-clambering lubricant) or CRC 2-26 (silicone). Do not use WD-40 — it washes away the factory lubricant and accelerates corrosion.

Can I drive with a non-working gas stop?

Short term yes, but it is dangerous: the lid can suddenly fall, damaging the seal or paintwork. In addition, the constant load on the loops will lead to their deformation.