Windshield Škoda Fabia - This is not just a glazing element, but a key safety component that affects visibility, body rigidity and the operation of driver assistance systems. From a crack to a complete replacement, owners of this compact model have to deal with nuances that the manufacturer is silent about. For example, heated glass on restyled versions requires a special approach during installation, and the wrong choice of glue can lead to seal peeling off after 2-3 years even on original parts.

In this article we will look at everything you need to know about windshields for Fabia different generations: from catalog numbers of the originals to step-by-step instructions for replacement, taking into account typical errors. We will pay special attention to models with Driver Assistance cameras (for example, Fabia III 2021+), where incorrect calibration after installing new glass may disable the traffic sign recognition system. You will also find current prices for 2026, comparison of analogues from Pilkington, Saint-Gobain Sekurit and other brands, as well as tips on how to save money without risking your safety.

Which windshield is on Škoda Fabia from the factory: originals and catalog numbers

Original windshields for Škoda Fabia supplied by the company Saint-Gobain Sekurit (France), but in catalogs Skoda they are listed under their own art. numbers. Important: even within the same generation, numbers may differ depending on the configuration. For example, Fabia II (2007–2014) with rain sensor has a different part number than the base without options.

Below is a table with current catalog numbers for different generations. Please note: for models with heated wiper zone (optional 4Z2 in the VIN decoder) requires special glass with conductive threads.

Generation Years of manufacture Original art. number Notes
Fabia I (6Y) 1999–2007 6Y1 845 001 A Without rain sensor, thickness 4.76 mm
Fabia II (5J) 2007–2014 5J1 845 001 A Standard, without heating
Fabia II (5J) Restyle 2010–2014 5J1 845 001 C With rain/light sensor
Fabia III (NJ) 2014–2021 NJ0 845 001 A Without camera Driver Assistance
Fabia III (NJ) Restyle 2021–present NJ0 845 001 D With chamber and heating (optional) 4Z2)

⚠️ Attention: On Fabia III 2021+ with system Travel Assist (adaptive cruise control) glass with an integrated camera is installed in the upper part. Required when replacing mandatory calibration on dealer equipment, otherwise the system will no longer recognize markings and signs.

📊 What generation of Škoda Fabia do you have?
  • Fabia I (1999–2007)
  • Fabia II (2007–2014)
  • Fabia III (2014–2021)
  • Fabia III facelift (2021–present)
  • Not decided yet

Analogues of original glass: what to choose instead Skoda?

Original glass from Skoda They are expensive (from 12,000 to 25,000 rubles depending on the generation), but there are high-quality analogues on the market that are not inferior in characteristics. The main thing is to choose a trusted manufacturer and avoid “no-name” brands whose glass may have distortions or incorrect geometry.

Here is a list of reliable alternatives with average prices for 2026:

  • 🔹 Pilkington (UK) - best price/quality ratio. Art. for Fabia III: PFG 5558 WTB (with rain sensor). Price: ~9,500 rubles.
  • 🔹 Saint-Gobain Sekurit (France) - the same manufacturer as for the original, but under its own brand. Art. 703506 for Fabia II. Price: ~11,000 rubles.
  • 🔹 Guardian (USA) - durable glass with good optics. Art. GW12345 (check by VIN). Price: ~8,800 rubles.
  • 🔹 XYG (China, premium line) - a budget option for Fabia I. Art. XYG-SK007. Price: ~5,500 rubles.

⚠️ Attention: On Fabia III with the system Lane Assist (lane control) glass cannot be installed without factory markings for the camera. Even if they are externally identical, the lack of a special coating will lead to false alarms of the system.

💡

Before purchasing an analogue, check availability ECE R43 certificate - this is a guarantee that the glass has passed crash tests and will not shatter into fragments in an accident.

When is replacement needed, and when can repairs be done?

Not every crack or chip requires a complete glass replacement. According to the rules GOST R 51709-2001, replacement is required in the following cases:

  • 🚨 A crack more than 30 cm long or passing through the driver's vision area (center).
  • 🚨 A chip with a diameter of > 1.5 cm with damage to the inner layer (triplex).
  • 🚨 Damage along the edge of the glass (risk of detachment from the body).
  • 🚨 Distortion of optics (for example, after unsuccessful repair).

In other cases, you can get by polymer repair. Modern formulations (for example, Permatex Pro Bond) restore strength by 80–90% and prevent the propagation of cracks. The average cost of repairing a chip is 1,500–2,500 rubles, cracks up to 20 cm are 3,000–4,500 rubles.

🔍 How to make a decision? If the damage does not fall within the driver's field of vision (windshield wiper area) and does not exceed acceptable dimensions, repair is a reasonable alternative. However, on Fabia III with cameras Driver Assistance Even a small chip at the top of the glass can distort the signal, so replacement is preferable here.

What happens if you drive with a cracked glass?

Driving for a long time with damaged glass is fraught not only with a fine (according to Article 12.5 of the Administrative Code - 500 rubles), but also:

1. Deterioration of visibility due to the refraction of light at the edges of the crack (especially at night).

2. Risk of sudden destruction when hit by stones or temperature changes.

3. Insurance refusal in payment for an accident if the expert considers that a crack contributed to the accident.

Step-by-step instructions for replacing a windshield with Škoda Fabia

Replacing glass with Fabia - a procedure that can be performed independently if you have the tools and patience. However, for models with cameras and sensors (for example, Fabia III 2021+) we recommend contacting the service - special equipment for calibration is required.

🛠 Required tools and materials:

  • 🔧 A string for cutting glue (or a special knife).
  • 🔧 Suction cups for removing glass (minimum 2 pcs.).
  • 🔧 Adhesive sealant (we recommend SikaTack Drive or 3M Urethane Adhesive).
  • 🔧 Degreaser (Anti-Silicone).
  • 🔧 Masking tape and protective film.

Step by step process:

  1. Preparation. Remove the wipers, plastic covers under the glass and disconnect the sensors (if any). Cover the edges of the body with masking tape to avoid damaging the paint.
  2. Removing old glass. Pass the string under the glass and carefully cut through the glue, starting from the top corner. Work with two people: one pulls the string, the other holds the glass with suction cups.
  3. Surface cleaning. Remove any remaining adhesive from the body and glass (you can use a scraper or solvent). Degrease the surface.
  4. Installation of new glass. Apply glue to the body frame (layer thickness ~5 mm). Carefully lower the glass, starting from the bottom, and press it with the suction cups. Secure with tape for 1-2 hours.
  5. Assembly. Connect the sensors, install the trims and wipers. Do not wash the car or open the doors for 12 hours!

Make sure that the new glass matches the art. number|Check the weather (do not work at temperatures below +5°C)|Disconnect the battery (for models with sensors)|Prepare a place (garage or shed)|Have an assistant to secure the glass-->

⚠️ Attention: On Fabia II and Fabia III a common problem with frame corrosion under glass. Before installing new glass, be sure to treat the metal with an anti-corrosive agent (for example, Dinitrol 4010), otherwise after a year or two the glue will begin to peel off.

💡

The most common mistake when replacing yourself is the incorrect thickness of the adhesive layer. A layer that is too thin (<3 mm) will lead to vibrations and squeaks, while a layer that is too thick (>7 mm) will lead to deformation of the glass.

How much does it cost to replace a windshield? Škoda Fabia in 2026?

The cost of replacement depends on the generation of the car, type of glass (original/analog) and region. Below are the average prices for Moscow and Russian regions (including labor and materials):

Generation Original glass Analogue (Pilkington/Sekurit) Crack repair (up to 20 cm)
Fabia I (1999–2007) 12 000–15 000 ₽ 7 000–9 000 ₽ 2 500–3 500 ₽
Fabia II (2007–2014) 15 000–18 000 ₽ 9 000–11 000 ₽ 3 000–4 000 ₽
Fabia III (2014–2021) 18 000–22 000 ₽ 11 000–14 000 ₽ 3 500–4 500 ₽
Fabia III Restyle (2021–present) 22 000–28 000 ₽* 15 000–18 000 ₽* 4 000–5 000 ₽

*Price includes camera calibration Driver Assistance (additionally ~3,000 rubles).

💡 How to save money? If you have CASCO, glass replacement is usually covered at the risk of “glazing damage” (deductible ~1,500–3,000 rubles). Also, many services offer discounts when ordering glass and turnkey work. For example, on the network Auto glass There is a promotion: installation as a gift when purchasing original glass.

Typical problems after glass replacement and how to avoid them

Even after professional replacement, owners Škoda Fabia sometimes they encounter unpleasant surprises. Here are the most common of them and ways to prevent them:

  • 💨 Whistle at speeds > 100 km/h. Reason: loose fit of glass or too thin layer of glue. Solution: re-glue the glass in compliance with the technology (glue thickness - 5-6 mm).
  • 💧 Water leaking into the interior. More common on Fabia I due to wear on the windshield seal. Solution: before installing new glass, replace the rubber seal (art. 6Y1 845 701).
  • 🚨 False alarms of the rain sensor. Occurs if the glass with the sensor is installed without calibration. Solution: contact the dealer for setup (cost ~1,500 rubles).
  • 🔊 Creaks when driving over uneven surfaces. Reason: corrosion of the frame under the glass or poor quality glue. Solution: disassemble and treat the metal with anti-corrosion agent, use glue with vibration-proofing properties (for example, Terostat 8599).

⚠️ Attention: On Fabia III with the system Front Assist (automatic braking) after replacing the glass, an error may light up A5 10E8 - "camera malfunction". This means the camera is not calibrated. You cannot fix the error yourself - dealer equipment is required (ODIS or VAS 6154).

Where to buy a windshield for Škoda Fabia: verified suppliers

Buying glass second-hand or in the markets is risky: there is a high chance of running into a fake or used part with microcracks. Here are the proven options for ordering:

  • 🛒 Official dealers Škoda. Pros: guarantee of originality, cons: high price and long delivery times (up to 2 weeks).
  • 🛒 Specialized auto glass stores:
    • Avtosteklo.ru — a wide range of analogues, there is a filter by VIN.
    • StekloFF — often hold promotions (for example, a 10% discount when ordering with installation).
    • GlassDrive — delivery throughout Russia, heated glass available for Fabia III.
  • 🛒 Foreign sites:
    • Autodoc — originals and analogues with delivery from Europe (prices are 15–20% lower than Russian ones).
    • Ebay — suitable for rare glasses (for example, for Fabia RS), but check the seller's reviews.

🔍 Tip: Please ask the seller before purchasing photo of glass markings (usually placed in the lower corner). The original must have a logo Saint-Gobain Sekurit or Skoda, as well as the certification mark ECE R43.

💡

When ordering glass online, always check whether it is included in the package. molding (seal). On Fabia II and Fabia III it is often sold separately (art. 5J1 845 701 A).

FAQ: Frequently asked questions about windshields Škoda Fabia

Is it possible to drive with a crack in the windshield if it does not interfere with your view?

Technically yes, but with reservations. According to traffic regulations (clause 4.3 "List of faults"), operation is prohibited if damage "restrict visibility from the driver's seat". However, even a small crack can:

  • Increase over time due to vibrations.
  • Distort the headlights of oncoming cars at night.
  • Be the reason for refusal of insurance payment in case of an accident.

On Fabia III with cameras Driver Assistance even a microcrack in the sensor area can disable the assistance system.

How to check if the glass is original on my Fabia?

The original glass has the following characteristics:

  • Marking Skoda or Saint-Gobain Sekurit in the lower corner (driver's side).
  • Inscription VW AG or SKODA AUTO (on glass for Fabia III).
  • Hologram with the manufacturer's logo (visible from a certain angle).
  • Perfectly smooth edges without burrs.

Analogues usually have brand markings (Pilkington, XYG) and may differ in tint shade.

How long does it take to replace glass? Fabia?

Average replacement time:

  • Fabia I: 1.5–2 hours (simple design).
  • Fabia II: 2–3 hours (requires removal of panels).
  • Fabia III: 3-4 hours (plus 1 hour for camera calibration, if applicable).

After replacement you cannot:

  • Wash the car for 12 hours.
  • Open/close doors with force (can move glass).
  • Drive at speeds > 80 km/h on the first 24 hours.
Is it possible to calibrate the camera yourself? Fabia III after glass replacement?

No. Camera Calibration Driver Assistance requires:

  • Special equipment (ODIS or VAS 6154).
  • Rooms with a flat floor and special markings.
  • Access to service settings Skoda (closed to conventional scanners like ELM327).

The cost of calibration at the dealer is ~3,000 rubles. Alternative: some independent services offer the service cheaper (from 1,800 rubles), but check the availability of equipment.

Which glass is better to choose for Fabia II — original or analogue?

The choice depends on your budget and requirements:

  • Original (5J1 845 001 C) - optimal if your Fabia equipped with a rain/light sensor. Guaranteed there will be no compatibility problems.
  • Pilkington (PFG 5558 WTB) — the best analogue in terms of price/quality ratio. Suitable for basic versions without electronics.
  • XYG - a budget option, but only for Fabia II no options (no guarantee of exact fit for sensors).

🔍 Important: On Fabia II with heated wiper zone (4Z2) you can only install the original or Saint-Gobain Sekurit marked HEATED.