Windshield Škoda Felicia 1997 model is not just a body part, but a key safety component. Even a small crack can lead to reduced visibility, weakened body rigidity and problems during inspection. In this article we will look at how to choose the right glass for Felicia first generation, which manufacturers offer high-quality analogues, and what to consider when replacing them yourself.

Cars Škoda Felicia 1997 models are equipped with windshields with unique sizes and fastenings. Original glass from VW Group are rare, but there are worthy analogues on the market from Pilkington, Saint-Gobain Sekurit and XYG. The main thing is not to make a mistake with the article number and type of tint (if provided).

If you encounter a crack or chip, do not rush to go to a service center: if you have the tools and patience, you can replace it yourself. We will describe the process in detail, point out common mistakes and give recommendations on choosing an adhesive-sealant. And for those who prefer to turn to professionals, we present the average prices for services in 2026.

Technical characteristics of the windshield Škoda Felicia 1997

Windshield for Škoda Felicia 1997 has the following parameters:

  • 📏 Dimensions: 1350 × 850 mm (may vary slightly depending on version).
  • 🔹 Thickness: 4.76 mm (standard for most European cars of that period).
  • 🔄 Mounting type: adhesive (without a rubber seal, as on older models).
  • 🌡️ Tinting: upper stripe (greenish or gray tint, width ~15 cm).

Important: glass for Felicia hatchback and station wagon (Combi) not interchangeable! The station wagon has wider glass and a different shape at the bottom. Please check before purchasing VIN code car or check the original catalog number: 6U0 845 011 A (for hatchback) and 6U0 845 011 B (for Combi).

Please also note the availability rain sensor (optional for top trim levels). If it is installed, the glass must have a special area for attaching the sensor. Otherwise, the sensor will not work correctly.

Parameter Hatchback (6U2) Station wagon (6U5)
Original article number 6U0 845 011 A 6U0 845 011 B
Size (W×H), mm 1350 × 850 1380 × 870
Tint type Top strip (15 cm) Top strip (15 cm)
Manufacturer OEM Saint-Gobain Sekurit Saint-Gobain Sekurit
⚠️ Attention: There are glasses on the market with markings 6U0 845 011 without letter suffix. Such products are often suitable for both modifications, but may have inaccurate geometry. Before purchasing, be sure to check the contours of the glass with the original!

How to choose a windshield: original vs analogues

Original glass for Škoda Felicia 1997 is a rarity today. Their production has long been discontinued, and relabeled analogues are often sold on the secondary market. Let's look at the main options:

  • 🔰 Original (VW Group): Quality is guaranteed, but the price can reach 20–25 thousand rubles (if you find it). Suitable for restoration of rare specimens.
  • 🏭 Premium analogues:
    • Pilkington (article PFG 10101) - optimal price/quality ratio.
    • Saint-Gobain Sekurit (article SG 19701) is the original supplier for VW.
    • XYG (article X-1358) is a Chinese brand with good reviews.
  • 💰 Budget analogues: BOS, NordGlass - 30-40% cheaper, but may have defects (waves, imprecise fit).
  • ♻️ Used glass: A risky option - they are often sold broken or with microcracks. Check for light!

When choosing an analogue, pay attention to:

  1. Marking: Signs must be present E1 (UNECE certification) and manufacturer's logo.
  2. Geometry: Compare with the original along the contour, especially in the areas where the wipers are attached.
  3. Edge quality: Cheap glass often has burrs that interfere with a sealed installation.
📊 Which glass would you prefer for the Škoda Felicia?
  • Original (if I can find it)
  • Pilkington/Saint-Gobain
  • Budget analogue (BOS, NordGlass)
  • Used from disassembly

Critical point: the windows for Felicia with and without air conditioning may differ in shape at the bottom (due to different air ducts). Check this detail with the seller!

Step-by-step instructions for replacing a windshield

Replacing glass with Škoda Felicia 1997 requires accuracy and patience. If you have no experience, it is better to contact the service, but if you decide to do it yourself, follow the algorithm:

1. Preparation and dismantling of old glass

  • 🔧 Tools: knife for cutting sealant, suction cups (2 pcs.), screwdrivers, masking tape, protective gloves.
  • 🧹 Preparation: wash the glass, remove the wipers, cover the hood and roof with a cloth (so as not to damage the paintwork).
  • 🚗 Dismantling: Carefully cut the sealant around the perimeter with a knife, starting from the top corner. Use suction cups to lift the glass.

Remove all items from the glove compartment|Disconnect the battery terminal (to prevent the airbags from deploying)|Seal the edges of the body with masking tape|Prepare a place for placing the removed glass (soft mat)-->

2. Cleaning and preparing the opening

After removing the glass:

  1. Remove any remaining old sealant with a spatula or a special scraper.
  2. Treat the metal with an anti-corrosion compound (for example, WD-40).
  3. Apply glass primer (eg 3M Glass Primer) onto the edge of the new glass and the body opening.

Do not use acetone or solvents for cleaning - they can damage the paintwork! Best option: White spirit or specialized cleaners (for example, Permatex 81158).

3. Installation of new glass

  • 🧲 Application of glue: use a polyurethane sealant (eg SikaTack Drive or Dow Betaseal). Apply in a continuous strip 8–10 mm thick.
  • 📏 Positioning: Install the glass according to the marks, starting from the bottom edge. Use suction cups for fixation.
  • Sukkah: do not close the doors for 1–2 hours (to avoid body deformation from drafts).
⚠️ Attention: If on your Felicia A rain sensor is installed, don't forget to transfer it to the new glass! To do this, carefully remove the old sensor (it is glued), clean the contacts and glue it to a new place using double-sided tape 3M VHB.
💡

Before applying the sealant, warm the tube in warm water (not higher than 40°C) - this way the glue will lie more evenly and will hold better.

How much does it cost to replace a windshield on a Škoda Felicia?

Replacement costs vary depending on glass type, region, and installation method. Below are the current prices for 2026 (for Moscow and the regions):

Glass type Price of glass, rubles Cost of work, rubles Total, rubles
Original (used) 8 000 – 12 000 3 500 – 5 000 11 500 – 17 000
Pilkington (new) 6 500 – 9 000 3 000 – 4 500 9 500 – 13 500
XYG (new) 4 500 – 6 000 3 000 – 4 500 7 500 – 10 500
Budget analogue (BOS) 3 000 – 4 500 3 000 – 4 500 6 000 – 9 000

The cost of work usually includes:

  • ✔️ Removing old glass.
  • ✔️ Cleaning the opening and applying primer.
  • ✔️ Installing new glass with sealant.
  • ✔️ Leak test (water test).

Additional costs may arise if:

  • 🔧 Replacement of moldings (rubber seals) is required - from 1,500 rubles.
  • 🌧️ It is necessary to restore the anti-corrosion coating - from 2,000 rubles.
  • 📡 Calibration of the rain sensor is required (if any) - from 1,000 rubles.
💡

Replacing it yourself will be cheaper, but without experience, the risk of mistakes is high: incorrect application of sealant can lead to leaks or peeling of the glass after 1-2 years.

Typical problems and how to avoid them

When replacing the windshield with Škoda Felicia owners often face the following problems:

  • 💧 Leaks: arise due to poor cleaning of the opening or improper application of sealant. Solution: use primer and apply glue in a continuous stripe.
  • 🌀 Creaks and vibrations: appear if the glass is installed skewed or the sealant is not dry. Solution: check the geometry before final fixation.
  • 🔊 Noise at speed: Poor quality molding or gaps may be the cause. Solution: use original seals or analogues from Heko.
  • 🌡️ The rain sensor does not work: often associated with contact damage during transfer. Solution: Clean the contacts with alcohol and check the integrity of the wiring.

Another common mistake is skimping on sealant. Cheap analogues (for example, Abro) may lose elasticity after a year, which will lead to glass peeling. Optimal options:

  • SikaTack Drive — dries quickly, resistant to vibrations.
  • Dow Betaseal 1527 — professional composition, used in car services.
  • 3M PU 590 - universal, suitable for self-replacement.
What to do if the glass cracks immediately after installation?

If the crack appears within 24 hours, the culprit is most likely:

1) Uneven application of sealant (local stresses).

2) Closing the doors too abruptly (the air wave deforms the glass).

3) Using glass with a defect (microcracks are not always visible to the naked eye).

Solution: Contact the service - under warranty they should replace it free of charge. If you installed it yourself, you will have to buy new glass.

Where to buy a windshield for Škoda Felicia 1997?

Find glass for Felicia 1997 is available in the following places:

  • 🛒 Online stores:
    • Exist.ru - a wide range of analogues.
    • EMEX - there is often glass Pilkington and XYG.
    • Autodoc — convenient selection by VIN.
  • 🏢 Local dealers: in large cities there are shops specializing in glass (for example, Stekloff in Moscow).
  • ♻️ Showdown: Used glass can be found at Drom.ru or Avito. Price: 2,000–5,000 rubles, but the risk of defects is high.
  • 🏭 Direct suppliers: some companies (for example, Glass Service) work directly with factories and can offer discounts.

When purchasing online, be sure to check:

  1. Year of manufacture and modification (hatchback or Combi).
  2. Presence of a rain sensor.
  3. Type of tint (if your glass has a green tint, take a similar one).
⚠️ Attention: There are glasses on the market for Škoda Favorit, which are similar in appearance to Felicia, but do not fit the fastenings! U Favorit The glass is narrower and has a different shape at the bottom.

Frequently asked questions about the Škoda Felicia windshield

Is it possible to drive with a crack in the windshield?

Technically yes, but it's not safe. A crack longer than 10 cm or in the driver’s viewing area is a reason for a fine (Part 1 of Article 12.5 of the Code of Administrative Offenses of the Russian Federation - 500 rubles). In addition, glass with a crack loses its strength and can crumble in an accident. If the crack is small (up to 3 cm), it can be repaired with polymer (cost: 800–1,500 rubles).

What sealant is best to use for Felicia?

For Škoda Felicia Polyurethane sealants with high elasticity are suitable. Best options:

  • SikaTack Drive — sets quickly (can be driven in 1 hour), resistant to temperature changes.
  • Dow Betaseal 1527 - professional composition, used in car services, drying time - 3 hours.
  • 3M PU 590 — universal, suitable for self-replacement, drying time — 2 hours.

Do not use silicone sealants - they do not provide sufficient strength!

How to remove a rain sensor from old glass?

The rain sensor is attached with double-sided tape. To remove it:

  1. Carefully pry the sensor with a plastic card or pick.
  2. Disconnect the power connector (it is located on the back side).
  3. Clean the sensor contacts and the new glass with alcohol.
  4. Attach the sensor to the new glass using tape 3M VHB (article 4950).

Do not use superglue or hot glue - they may damage the sensor!

How long can you not wash your car after replacing the glass?

The minimum period is 24 hours. Optimally - 48 hours. This is due to the fact that the sealant gains full strength only after 2 days. During the first 12 hours, avoid:

  • High pressure washers (can damage uncured adhesive).
  • Sudden closing of doors (the air wave can dislodge the glass).
  • Off-road driving (vibrations impair adhesion).
Is it possible to install glass from another Škoda model?

Theoretically, glass from Škoda Favorit (1987–1995), but they are narrower by 2–3 cm and have a different shape at the bottom. Glass from VW Polo or Seat Ibiza of the same period - despite the common platform, the geometry is different. The only option is glass from Felicia 1998–2001 (they are identical to the 1997 model).