ŠKODA Felicia 1998: How to choose, replace and save

Škoda Felicia 1998 – the legendary Czech hatchback, which still travels on the roads of the CIS. But even these "unkillable" machines have weaknesses, and one of them is that they're not dead. windshield. Cracks from stones, turbidity from time to time or mechanical damage sooner or later make the owner think about replacing. In this article, we will analyze everything you need to know: from the selection of glass to self-replacement and care for a new one.

Feature Felicia - non-standard geometry of the windshield with a characteristic bending in the lower part. This makes it difficult to find a quality analogue and requires precision in installation. We analyzed the 2026 market, surveyed the masters and collected data on the most common substitution errors. There's no water here, just specific models of glasses with articles, proven services and step-by-step instructions with photos.

Original vs analogue: what to choose for Škoda Felicia 1998?

Original windshield for Felicia company-produced Sekurit Saint-Gobain (article 6U0 845 001 or 6U0845001A for the tinted version. Today it can only be found at showdowns or at dealers with the remains of an old warehouse. The price is from 15 000 to 25 000 rubles, but the quality justifies the investment: perfect fit, no optical distortion and durability.

Analogues are cheaper, but it is important not to run into a fake. Best options:

• 🔹 Pilkington (PF 6000) British brand with a good reputation. Price: 8 000-12,000 rubles. Minus: Sometimes you come across glass with a green tint.
• 🔹 XYG (China) Budget option (4000-6000 rubles), but only if you buy from official distributors. AliExpress is often used as a leftist.
• 🔹 NordGlass (Poland) - optimal price/quality ratio (9000-11,000 rubles). Article: NG 6001FL.
• 🔹 BOS (Germany) - premium analogue (13 000-16,000 rubles), in quality is not inferior to the original.

⚠️ Attention: On Felicia In 1998, two types of glass were installed: with a rain sensor and without. If your car is equipped with climate control, check for a connector under the sensor at the top of the glass. Analogues without nests under the sensor will not work!

How to check a windshield before purchasing?

Even new glass can have defects. Here's what you should check:

1. Optical distortion. Look through the glass at straight lines (for example, the doorway). If they play, it's marriage.
2. Thickness The original is 4.75 mm. Analogs are often thinner (4.2-4.5 mm), which affects noise insulation.
3. Adhesive tape. On the perimeter should be a black cant width of 10-12 mm. If it is uneven or peels off, the glass was stored incorrectly.
4. Marking. The original logo is engraved in the lower left corner. Sekurit and the batch number. The analogues have their own designations (for example, Pilkington - the letters "PL" in the circle.

🔍 Professional life hack: Take a laser pointer with you to the store. Direct the beam at an angle of 45° to the glass - if the output beam splits, then the glass has internal stresses and over time can crack.

Self-replacement: step-by-step instructions

Replacing the windshield with Felicia - a task of medium complexity. If you have the tools and an assistant, you can do it in 3-4 hours. The main thing is to take your time and follow the algorithm.

Required tools:

• 🔧 A string for cutting glue (or a special knife for glass).
• 🔧 Suction cups for removing glass (2 pcs., load capacity from 30 kg).
• 🔧 Sealant primer (3M 08609 or equivalent).
• 🔧 Glass glue (SikaTack Drive or Terostat 8599).
• 🔧 Construction hair dryer (for heating old glue).
• 🔧 A set of screwdrivers and a 10 mm wrench (for removing moldings).

Step by step process:

1. Removing old glass. Carefully cut through the glue with a string, starting from the top corner. Move around the perimeter, pressing the string against the frame. Do not press too hard - you may damage the body paint!
2. Cleaning the frame. Remove any remaining adhesive with a spatula or scraper. Treat the surface with a primer for better adhesion.
3. Installation of new glass. Apply glue to the frame (layer thickness 5–7 mm). Install the glass starting from the bottom and press it evenly around the entire perimeter. Use suction cups for fixation.
4. Assembly. Install moldings and wipers. Do not turn on the heated glass and do not wash the car for at least 24 hours!

What to do if the glass “goes” like a wave after installation?

This is a sign of improper distribution of glue or a violation of technology. Remove the glass and repeat the procedure, paying special attention to uniform pressure during installation. If the problem repeats, check the geometry of the body (the frame may be deformed after an accident).

How much does a service replacement cost?

Windshield replacement prices for Škoda Felicia vary by region and type of glass. The table below shows average prices in Russia for 2026 (including labor and materials):

Glass type	Cost (RUB)	Opening hours	Warranty
Original (Sekurit)	20 000–30 000	3–4 hours	12 months
Pilkington/NordGlass	12 000–18 000	2.5–3 hours	6 months
XYG (budget)	7 000–10 000	2 hours	3 months
Installing your own glass	3 000–5 000	2 hours	No warranty

⚠️ Attention: In Moscow and St. Petersburg, many services refuse to work with Felicia because of her age. Before making an appointment, check to see if the technician has experience with this model. For example, networks "Stekloff" and "Autoglass" They undertake a replacement, but require an advance payment of 50%.

💡 Tip: If you are offered a replacement in 1–2 hours at a price of 3,000–4,000 rubles, this is a reason to be wary. Most likely they use cheap glue (not Sika!), which will begin to peel off after six months.

Crack in windshield: repair or replace?

Not every crack is a death sentence for glass. It all depends on its type, length and location:

• 🔸 "Bull's Eye" (round crack from a stone) - can be repaired if the diameter is less than 2 cm.
• 🔸 Star (rays from the center) - repair is possible if the rays are no longer than 5 cm.
• 🔸 Straight crack - if it is shorter than 10 cm and does not reach the edge of the glass, it is filled with polymer.
• 🔸 Crack along the edge — replacement is required! Even after repair, the glass will lose strength.

The cost of repairing a crack in the service: 1,500–3,000 rubles. But there are nuances:

• 🔹 After repair, glass loses up to 30% of its strength.
• 🔹 The polymer turns yellow over time (after 1–2 years).
• 🔹 If the crack is in the driver's line of sight, the repair may not pass inspection.

📌 Conclusion: Repair is justified only for small chips on the periphery. In other cases, it is cheaper and safer to replace the glass immediately.

Windshield care: how to extend its life?

The average lifespan of a windshield is Felicia - 8–10 years. But with proper care, this period can be increased to 15 years. Here's what really works:

1. Washing. Use only soft sponges and special car shampoos (for example, Sonax Glass Cleaner). No brushes or abrasives!
2. Sun protection. In hot weather, cover the glass with a light-protective screen. UV rays destroy the structure of glass, making it brittle.
3. Hydrophobe treatment. Apply a composition such as once every 3 months Aquapel or Rain-X. This not only improves visibility in the rain, but also protects against microcracks.
4. Checking the seals. Inspect rubber moldings once a year. If they are cracked, replace them, otherwise moisture will penetrate under the glass, causing corrosion of the frame.

⚠️ Attention: Never pour hot water on frozen glass! Temperature changes lead to microcracks. Use special defrosters (for example, Liqui Moly Anti-Ice) or a plastic scraper.

🔧 Useful lifehack: If small scratches appear on the glass, they can be polished with paste. 3M Glass Polishing Compound (article 09374). But don’t overdo it—excessive friction will thin the glass!

Where to buy a windshield for Felicia 1998?

Find glass for Škoda Felicia - a separate quest. Here are the tested options:

• 🛒 Official Škoda dealers. Remains of the original glass can still be found, but the prices are steep. Before your trip, call and check availability by item number 6U0 845 001.
• 🛒 Specialized auto glass stores:
  • Stekloff (Moscow, St. Petersburg, Yekaterinburg) - a wide selection of analogues.
  • Avtosteklo.ru — delivery throughout Russia, yes NordGlass and Pilkington.
  • GlassDrive — mobile teams with travel (relevant for regions).
• 🛒 Showdown. Best options:
  • Carpicker — filter by year and model.
  • Bamper.by — Belarusian showdowns with delivery to the Russian Federation.
  • Local showdowns (search for "Felicia showdown [your city]").
• 🛒 AliExpress/Foreign sites. Only if you are willing to wait 1-2 months and risk quality. Top Sellers: Auto Glass Store, Car Windshield Shop. Be sure to read reviews with photos!

💰 Saving tip: If you find glass during disassembly, ask the seller to photograph it in the light. This way you will see internal defects that are not visible to the naked eye.

FAQ: Frequently asked questions about windshields Felicia 1998

Is it possible to install a windshield from Škoda Fabia on Felicia?

No! Despite the external similarity, the glasses have different geometries. U Fabia The glass is 3 cm wider and has a different curve at the bottom. Installation is only possible with alteration of the frame, which is impractical.

What should I do if, after replacing the glass, a whistling noise appears at speed?

This is a sign of a loose fit. Reasons:

1. Not enough glue in some places.
2. Deformation of the sealing rubber.
3. Moldings installed incorrectly.

Solution: return to the service center for reinstallation or additionally apply sealant to problem areas.

How to remove moldings from windshield without breaking them?

Use a plastic pick or a special clip remover. Start at the bottom corner, carefully prying up the molding. Don't pull it towards you - move it along the glass. Clips on Felicia fragile, so it’s better to buy spare ones (item no. 6U0 837 715).

How long does it take for glue to dry after replacing glass?

Depends on the type of glue and temperature:

• SikaTack Drive: 1 hour until tempering strength, 24 hours until full.
• Terostat 8599: 2 hours and 48 hours respectively.
• 3M Urethane: 30 minutes and 12 hours.

In cold weather (below +10°C), the polymerization time increases by 2 times.

Is it true that the tinted windshield is Felicia prohibited?

Yes. According to GOST 32565-2013, the light transmission of the windshield must be at least 70%. Tinting (even factory-made) reduces this figure to 50–60%, which is a violation. Fine - 500 rubles (Article 12.5 of the Administrative Code).