Rear glass cover ŠKODA Kodiaq is not just an accessory, but a practical solution for protecting from the sun, maintaining privacy and improving the appearance of the car. Crossover owners often face the problem of interior overheating in the summer, plastic panels burning out, or simply want to give the car its own personality. But how to choose the right model among dozens of offers on the market? Which materials cope better with the task, and which quickly become unusable?

In this article we will analyze all the nuances: from the types of overlays (tinting, sun protection, decorative) to step-by-step instructions for installation without bubbles and creases. You will find out which brands offer the best value for money for Kodiaq, how to avoid mistakes during installation and what to do if the lining begins to peel off after a month. And also - unique life hacks, which you will not find in standard instructions, for example, how to combine the cover with a rain sensor or a rear view camera.

Why do I need a back window patch? ŠKODA Kodiaq?

At first glance, the back lining seems to be a simple accessory, but in fact it solves several important tasks:

  • 🔥 Sun protectionReduces the heat of the cabin in the summer up to 15-20°C (according to tests ADAC), which reduces the load on the air conditioner and saves fuel.
  • 👁️ Privacy: hides the contents of the trunk from prying eyes, which is especially important for owners Kodiaq It's a big cargo bay.
  • 🎨 Aesthetics: visually highlights the car, masks scratches on the glass and gives a complete look to the rear of the body.
  • 🛡️ UV protection: prevents the burning of plastic and leather finish, prolonging the life of the salon.

Interesting fact: according to a survey among owners ŠKODA Kodiaq 2020-2023, 68% They were installed in the first six months after buying the car. And yet, 42% This is due to overheating problems, and 26% - for tuning. The rest were guided by a combination of reasons.

📊 Why did you choose the back window?
  • Sun protection
  • Privacy
  • Improved appearance
  • Protecting the cabin from burnout
  • Another option

However, not all the slacks are equally useful. For example, cheap film options can be used. render out through the rear window at night or create glare that interferes with the driver. And an improperly installed lining can damage the heating of glass or parktronic sensors. This is discussed in the following sections.

Types of slacks: which is suitable for Kodiaq?

The market offers three main types of overlays, each of which has its pros and cons. The choice depends on your priorities: maximum protection, durability or budget.

Overlay type Material Pros Cons Service life
Tint film Polyester with metallized or ceramic coating ✅ Low price
✅ Easy installation
✅ Different degrees of blackout		 ❌ Fast-burning.
❌ Maybe bubble.
❌ Hard to remove without a trace.		 1–3 years
Rigid lining (plastic/acrylic) ABS plastic, acrylic, polycarbonate ✅ Durability
✅ Perfect fit in the shape of glass
✅ Not burn out.		 ❌ High price
❌ It's harder to set up
❌ Can rattle on bumps		 5–7 years
Cloth lining (rollet) Polyester fiber with UV protection ✅ Removable, convenient to store
✅ Does not interfere with the viewing when driving
✅ Suitable for rental cars		 ❌ Requires regular cleaning
❌ Could sag.
❌ Less protects against heat		 3–5 years

For ŠKODA Kodiaq optimal choice It will be a tough line from brands. Hecko, ClimAir or EGR. They're counting. unique rear window shape models (especially in versions with a panoramic roof) and do not interfere with the operation of the rain sensor. Tonic films are better to choose with ceramic coating They retain color longer and do not interfere with electronics.

💡

If your Kodiaq There's a rear-view camera, choose a cutout pad. Otherwise, the image will be distorted, and the parking sensors may not work correctly.

Size and compatibility: how not to make a mistake when buying?

One of the main rules: The slat should be perfectly sized. For ŠKODA Kodiaq (2017–2026) Standard dimensions of the rear window are 1450 x 650 mm, but there are nuances:

  • 📏 Basic version: suitable for majority of crossovers for "universal" crossovers (e.g. Hecko 1105).
  • 🚗 Modifications with panoramic roof: require special models with a shortened top (e.g. ClimAir SK-01).
  • 🔧 Cars with a rain sensor: need a patch with a notch under the sensor (usually marked on the package as "sensor-friendly").
  • 📱 Models with 360° cameraCheck compatibility with the system Area View (y Kodiaq 2020+ may conflict with metallic films.

Warning: If you choose a “similar” sized patch, but not exact, it may:

⚠️ Attention: Cover the heating of the glass, which will lead to its overheating and cracks. V Kodiaq Heated rear window is integrated into the defroster threads - they can not be closed more than 20% of the area.

To avoid mistakes, always check with VIN code use your vehicle or use online configurators on manufacturers' websites (e.g. Hecko or ClimAir). You can enter the car data and get an exact article.

How to check compatibility without VIN?

If you don’t have a VIN on hand, measure the glass with roulette in three places: on the top edge, the bottom and diagonally. Compare it to the sizes in the catalog. The permissible deviation is not more than 5 mm.

Top 5 rubber brands for ŠKODA Kodiaq (from 2026 reviews)

We analyzed reviews on Drive2, Auto.ru and foreign forums to make a rating of the best manufacturers. Criteria: quality of materials, planting accuracy, durability and price/quality ratio.

  1. Hecko (Germany)

    Market leader with a 30-year history. For Kodiaq offers models 1105 (standard) and 1105-P (for a panoramic roof). Pros: perfect geometry, UV protection 99%, warranty 3 years. Minus - price (from 8 000 rubles).

  2. ClimAir (Czech Republic)

    Official partner ŠKODA. Overlays SK-01 and SK-02 They were designed with specific features in mind. Kodiaqincluding the location of the sensors. The material is acrylic with anti-reflective coating. Price: 6,500-7,500 rubles.

  3. EGR (Italy)

    Budget option with good quality. Model EGR SK17 suitable for Kodiaq 2017-2020. Plus: there is a glass cleaner in the kit. Cons: The tinting may slightly distort the GPS signal.

  4. Covercraft (USA)

    The premium segment. The linings polycarbonate with scratch protection. Model UVS100 It blocks 100% of UV rays. Price: from 12,000 rubles, but lasts 7+ years.

  5. SunTek (China/Taiwan)

    The best choice for those looking for a balance of price and quality. Films. SunTek CXP with ceramic coatings do not interfere with radio communication and cost from 3,500 rubles. Cons: It is more difficult to glue yourself.

💡

For ŠKODA Kodiaq 2021+ with system Travel Assist Only the metallized layers are suitable (for example, ClimAir SK-02 or Hecko 1105-P). Metal in the film can block radar signals.

Step by step: how to install a patch without bubbles?

Installation of the pad is a process that requires accuracy. Errors at this stage will result in detachment, bubbles or damage to the glass. We've collected. test-figureIt works even for beginners.

Clean the glass with a silicone-free remedy (for example, Sonax Glass Cleaner)

Take off the wipers and seal them with paint tape.

Dry the glass with a hair dryer (humidity is the main enemy!)

Prepare a soap solution (5 drops of shampoo per 1 liter of water)->

Step 1. Marking

Put the lining on the glass face up And circle her around with paint tape. This will help you to orientate when gluing. For hard linings, use the attached template.

Step 2. Applying glue

If the lining is self-adhesive, remove the protective layer by 10-15 cm and apply the upper edge to the glass. Apply glue for the film (for example, 3M Super Trim Adhesive) a thin layer on the glass and the lining itself.

Step 3. Alignment

Carefully press the lining from the center to the edges, squeezing out air bubbles with a plastic spatula. For films, use the technique of "wet installation": spray the glass with soap solution - this will move the film to the ideal position.

Step 4. Fixation

After gluing, warm up the edges with a hairdryer (temperature not higher than 50 ° C!) and press again. Leave the car in the garage for 24 hours – it is critical for the polymerization of glue.

💡

If after installation there are small bubbles, puncture them with a needle and smooth them out. Large bubbles will not be removed - you will have to glue.

⚠️ Attention: Never use ammonia products to clean glass (for example, Windex) - they break down the adhesive layer of the lining and may leave the stains on the tinting.

Common mistakes and how to avoid them

Even experienced car owners make mistakes when choosing and installing linings. Here are the most common ones and ways to prevent them:

  • 🧴 Using the wrong glue: for example, superglue or moment They can damage the glass. Use only specialized formulations (3M, Tesa).
  • ☀️ Installation under direct sunlight: The glue is grasped too quickly, not allowing the lining to be leveled. Work in the shadows or in the evening.
  • 🔧 Ignoring sensors: If the lining covers the rain or light sensor, the glass will not automatically darken and the wipers will not work. Check compatibility in advance.
  • 🧼 Inadequate cleaning of glassEven microparticles of dust will lead to detachment. Use it. two-stage cleaning: first degreaser, then alcohol.

One of the most insidious mistakes is failure to take climate conditions into account. For example, in regions with extreme temperature changes (such as Siberia), cheap films can shrink and move away from the glass in winter. In this case, it is better to choose acrylic linings or films with temperature-stability (for example, SunTek CXP).

Another nuance: if yours Kodiaq there is a function Auto HoldCheck if the radar is disturbing the radar. In some cases, metallized films can cause false system response.

Caring for the pad: how to extend its service life?

Even the best quality patch will not last long if it is not properly cared for. Here are the key rules:

  • 🧽 Washing: Use only mild detergents (e.g., Sonax Xtreme) and microfiber. Brushes and harsh chemicals scratch the surface.
  • 🌡️ TemperatureAvoid washing with hot water in winter – a sharp temperature drop can warp the film.
  • 🚿 Drying: After washing, immediately wipe the lining dry, especially at the edges. Moisture under the film leads to detachment.
  • 🔧 RepairIf the patch has started to move, do not delay the repair. A small defect in a month can turn into a complete detachment.

For hard linings, apply once every six months protective wax (for example, Collinite 845) - this will prevent the plastic from becoming cloudy. If the lining is fabric, wash it manually in cool water without bleach.

⚠️ Attention: If microcracks appear on the patch (especially on acrylic models), do not try to "cure" them with glue. Cracks are a sign of aging material, and soon the overlay will have to be changed.
Can I install a back window with heating?

Yes, but you need to choose models with perforation in the area of the heating filaments (usually marked on the package as "heated glass compatible"). Complete overlap of threads will lead to their overheating and failure. For Kodiaq fitting Hecko 1105 or ClimAir SK-01 - they have special cutouts.

Will the overlay interfere with the work of the rear view camera?

If the overlay does not have a cutout for the camera, then yes - the image will be distorted, especially at night. All the quality overlays for Kodiaq (for example, from EGR or Covercraft) take into account the location of the chamber. Before buying, check with the seller whether the model has a cutout for Rear View Camera.

Can I put a slap on in the winter?

Technically, yes, but there are nuances. At temperatures below +5°C, the glue is less absorbed and the film becomes less elastic, which increases the risk of bubbles. If you have to glue in winter, warm up the cabin to +20 ° C and use a hair dryer to soften the material. Hard pads can be installed all year round.

How to remove an old lining without damaging the glass?

Use the film to remove the film construction hair dryer And a plastic scraper. Heat the angle of the pad with a hairdryer (temperature 60-70 ° C), gently dent and pull at an angle of 45 °. Remove the glue residues with the means Profoam 2000 Or a white spirit. For rigid overlays, it is enough to disconnect the clips (if any) and remove the panel.

Is the GOST tinting system legal?

According to GOST 32565-2013, the light transmission of the rear window should be at least 70%. Most of the overlays for Kodiaq They have a bandwidth of 75-85%, which is normal. However, metallized films can reduce transmission by up to 60-65% – this is already a violation. Before buying, check the certificate of conformity.