Search for the identification number of the unit on the car Skoda Kodiaq With a 2.0 engine, gasoline is a procedure that may be required when buying a used copy, registering with the traffic police or ordering original spare parts. Many owners mistakenly believe that this number always duplicates the VIN-code, but in modern engines of the concern VAG the situation is radically different. Understanding exactly where to look for a marking and how to count it correctly will save you time and nerves during the technical verification process.
The engine capacity of 2.0 liters, installed on KodiaqIt is most often related to the family. EA888. These power plants are highly reliable, but have a specific marking location, which is not always obvious to the owner. Unlike the old models, where the number was knocked out in a prominent place on the cylinder block, on modern models. Skoda Information is often hidden under attachments or in hard-to-reach areas requiring visual inspection.
Location of markings on the cylinder block
Main identification plate with engine number on gasoline engines Skoda Kodiaq 2.0 TSI is located on the cylinder block. You need to open the hood and carefully inspect the rear of the engine, closer to the partition of the engine compartment. Often the number is knocked directly on the metal surface of the block, but due to the presence of heat shields or brackets, it can be difficult to see with the naked eye.
In most cases, the marking is located at the bottom of the block, in the area of the junction with the gearbox. To see it, you may need to use a mirror with a handle and a powerful flashlight. It is important to note that on some modifications, the number can be applied to a special aluminum plate glued to the block, which can be peeled off or oxidized over time.
If you see only a few numbers or letters, donโt try to guess them. Each letter and number is important for identifying a particular batch of the engine. Clean the marking area of oil and dirt using rags and brake cleaner, but avoid using metal brushes to avoid damaging the engraving itself.
โ ๏ธ Note: Do not use aggressive chemical solvents to clean the area of the application of the number, as this can erase the paint or damage the protective coating around the marking, which will make it difficult to read when inspected by inspectors.
Differences between VIN and Engine Number
Many owners Skoda Kodiaq They make the mistake of trying to find the full VIN code of the car on the engine. In modern VAG cars, the engine number and the VIN are two completely different identifiers. The VIN code is applied to the nameplate located on the body, and the engine number is unique for the power unit.
The engine number consists of a prefix (motor model index) and a serial number. For example, for a 2.0 TSI engine, the index may look like DKZA or DKRB. These letters are key to understanding your engineโs performance, including power, environmental grade, and year of release. The serial part of the room is unique for each specific unit.
When checking documents, it is important to check the engine index and its serial number with the data in the PTS or CTS. The discrepancy of even one letter in the index may indicate a replacement of the engine or an attempt to forge documents, which is a serious reason for refusing to register a car.
Indexing of 2.0 TSI engines of the EA888 family
Engines Skoda Kodiaq 2.0 gasoline has a complex indexing system that allows you to distinguish versions with different power. The index is usually four letters long and is placed next to the serial number. Knowing this index is critical when selecting spare parts, as even visually identical motors can have different firmware and components.
- ๐ง DKZA - version with a capacity of 190 hp, often found on the trim levels Style and Ambition.
- ๐ง DKRB - version with a capacity of 150 hp, is installed on the basic configuration of Active.
- ๐ง DADA - an older version of the engine, which was also found in early releases Kodiaq.
Each of these indexes corresponds to a specific engine code, which can also be found in the service book. If you are planning to tune or replace nodes, be sure to specify the index, as some components, such as turbochargers or injectors, may not be suitable for another modification.
European versions may differ from Russian or Chinese counterparts even with the same declared power. Therefore, always check the index against the official spare parts catalogues for your market.
- DKZA (190bhp)
- DKRB (150bhp)
- Other
- I don't know
How to check the engine number when purchasing
When purchasing a second-hand Skoda Kodiaq Checking the engine number is a mandatory step. Do not blindly trust documents, as the data in the PTS could be entered with error or intentionally distorted. The visual inspection should be carried out in the presence of the seller to eliminate the risk of fraud.
Use a clean rag and flashlight to reach the area of the application. If the room is worn, blurred or has traces of mechanical damage (scratches, sodium), this is a serious cause for concern. Such damage may indicate that the engine has been replaced by a contract or rebuilt after a major accident.
It is also worth checking the presence of traces of opening of the engine mount bolts and the gearbox. If you see tears of slits or fresh traces of the tool on the fasteners, this may indicate the dismantling of the unit. In this case, a thorough check of the service history is required.
โ๏ธ Checking engine number when buying
Readability Issues and Recovery Methods
Sometimes the engine number Skoda Kodiaq It can be difficult to read because of oil, corrosion or sourness. In such cases, you should not immediately contact the forensic laboratory or try to polish the surface yourself. There are safe cleaning methods that can help to return the readability of the marking without the risk of damaging it.
Apply penetrating lubricant or carburetor cleaner to the room place and wait a few minutes. Then carefully remove the coar with a soft brush or rag. If the number is still not visible, you can try using the method with copy paper or charcoal, but this requires caution and skill.
If the number is completely lost or damaged as a result of corrosion, the only legal way to restore identification is to contact specialized services or traffic police. In this case, an examination is carried out that can confirm or refute the origin of the unit.
โ ๏ธ Attention: It is strictly forbidden to independently restore the engine number by grinding, drilling or applying new marks. This qualifies as the intentional destruction of the identification number and entails administrative or criminal liability.
What to do if the number is not readable?
If the number is not readable due to dirt, use a cleaner. If damaged mechanically - contact the traffic police for examination. Self-recovery is illegal.
Correspondence table of indices and characteristics
For the convenience of owners and mechanics, below is a table that compares the indices of 2.0 gasoline engines for Skoda Kodiaq and their main technical characteristics. This information will help you quickly determine the type of motor you have and its features.
| Engine index | Power (hp) | Torque (Nm) | Years of manufacture | Features |
|---|---|---|---|---|
| DKZA | 190 | 320 | 2017 - present | Direct injection, turbo |
| DKRB | 150 | 250 | 2017 - present | Reduced power |
| DADA | 190 | 320 | 2016 - 2018 | Early version of EA888 |
| DHZB | 190 | 320 | 2018 - 2020 | Updated version |
Please note that specifications may vary slightly depending on the year of manufacture and market. For example, engines for the Chinese market may have different firmware settings and environmental standards. Always check the official technical data for your specific model.
Save a screenshot or photo of the engine number in your phone immediately after purchase. This will make it easier to order parts in the future if access to the engine compartment is difficult.
Legal aspects and registration
When registering a car with the traffic police, the engine number is one of the key parameters that is checked by inspectors. If the number does not match the data in the documents or is missing, the registration procedure will be suspended. This may lead to difficulties in obtaining numbers and an MTPL policy.
- ๐ Data reconciliation โ the inspector must visually verify the presence of the number and its compliance with the PTS.
- ๐ Expertise โ in case of doubt about the authenticity of the number, an auto technical examination is assigned.
- ๐ Replacing the unit โ if the engine has been replaced, it is necessary to make changes to the title by providing documents for the new engine.
If you plan to replace the engine with a similar one, but with a different number, be sure to carry out the procedure for making changes to the registration data. Ignoring this requirement may result in fines and the inability to further operate the vehicle.
It is important to understand that replacing an engine with another one that is not identical in design may require re-registration of the car as new. This is due to changes in the technical characteristics of the vehicle, which are reflected in the PTS.
Legal purity of the engine number is the key to trouble-free registration and operation of the car. Any discrepancies require official recording and re-registration.
Unit maintenance and replacement
If necessary, replace the engine Skoda Kodiaq 2.0 gasoline, it is important to choose the right new unit. The best option is to install a motor with the same index as the original one. This ensures compatibility with control systems, transmission and vehicle electronics.
If you decide to install an engine with a different index, but the same series (for example, DKZA instead of DADA), make sure all required sensors and wiring are compatible. In some cases, it may be necessary to reflash the electronic control unit (ECU) for the new motor to operate correctly.
After replacing the engine, do not forget to carry out the adaptation and training procedure. This includes adjusting the throttle, adapting the transmission and checking the operation of all systems. Ignoring these steps can lead to unstable engine operation and increased fuel consumption.
Frequently asked questions (FAQ)
Where exactly is the engine number of the Skoda Kodiaq 2.0?
The engine number is located on the cylinder block, usually in the rear, closer to the partition of the engine compartment or in the lower junction area with the gearbox. Access to it may be difficult with attachments.
Does the engine number always match the VIN?
No, the engine number and VIN are different identifiers. The engine number is unique to the engine itself, while the VIN is unique to the body of the vehicle. In modern VAGs they do not duplicate each other.
What to do if the engine number is not read?
If the number is not readable due to dirt, clean it. If it is mechanically damaged, you must contact the traffic police to conduct an examination and confirm the authenticity of the unit. Self-recovery is prohibited.
Is it possible to replace the engine with a different index?
Technically this is possible, but legally it requires changes to the PTS. Installing an engine with a different index may require flashing the ECU and checking system compatibility.
How to decipher the DKZA engine index?
Index DKZA indicates a 2.0 TSI engine with 190 hp. with turbocharging. This is one of the most common modifications for Skoda Kodiaq in the last years of release.