Skoda Kodiaq wheel parameters: standard sizes, ET offset, PCD and diameters for all generations

Selecting disks for Skoda Kodiaq - a task that requires attention to detail. Even a slight deviation from factory parameters can lead to handling problems, premature suspension wear, or warranty coverage. In this article we will look at all key characteristics: from diameter and width to offset (ET) and bolt pattern (PCD), and we’ll also tell you how to choose the right wheels for different generations and configurations Kodiaq - from basic Active to top Laurin & Klement.

We will pay special attention unique nuances of the 2026 model, where the manufacturer has changed the tolerances for some modifications. You will also find a compatibility table with original part numbers, examples of successful non-standard combinations, and answers to frequently asked questions about installing larger diameter discs. If you are planning tuning or seasonal tire changes, this information will help you avoid costly mistakes.

Standard parameters of Skoda Kodiaq wheels: what do the numbers on the marking mean?

Any disk for Skoda Kodiaq is marked with a set of parameters that determine its compatibility with the car. Let's look at the basic notations using a typical inscription as an example: 7.5J x 18 ET45 PCD 5×112.

Let's look at each parameter:

• 📏 7.5J - rim width in inches (letter J denotes the shape of the edge). For Kodiaq permissible range: from 7.0 to 9.0J depending on the diameter.
• 🔄 x18 — bore diameter in inches (from 17" to 21" in standard configurations).
• ↔️ ET45 — disc offset (offset) in millimeters. Critical parameter: deviation of more than ±5 mm can lead to friction with the arch or hub.
• ⚙️ PCD 5×112 — bolt pattern: 5 holes for bolts located on a circle with a diameter of 112 mm. For everyone Kodiaq this parameter is the same.
• ⚠️ DIA 57.1 — diameter of the central hole (hub). Must match vehicle hub size.

Manufacturer Škoda strictly regulates these parameters for each configuration. For example, disks 8J x 19 ET42 installed on versions with engines 2.0 TSI 190 hp and 2.0 TDI 150 hp, whereas for the base 1.5 TSI 150 hp provided 7J x 17 ET45. Exceeding the recommended width by more than 1.5" requires mandatory checking at the wheel alignment stand.

Table of original disk parameters by year and configuration

Below are the factory data for Skoda Kodiaq all generations (2017–2026). Please note: parameters may vary depending on the sales market (Europe, Russia, USA) and optional packages (e.g. Sportline or Scout).

Year of issue	Equipment	Engine	Disk size	offset (ET)	PCD	DIA
2017–2020	Active, Ambition	1.5 TSI (150 hp)	7J x 17	ET45	5×112	57.1
2018–2023	Style, Sportline	2.0 TSI (190 hp)	8J x 19	ET42	5×112	57.1
2020–2026	Laurin & Klement	2.0 TDI (200 hp)	8.5J x 20	ET38	5×112	57.1
2021–2026	Scout	2.0 TSI (220 hp)	8J x 19	ET40	5×112	57.1
2026	RS (new)	2.0 TSI (245 hp)	9J x 21	ET35	5×112	57.1

For models Kodiaq 2026 with hybrid powertrains (for example, 1.4 TSI e-TEC) the manufacturer recommends discs 7.5J x 18 ET43 — this is due to the increased weight of the batteries and the need to optimize the load on the suspension. When replacing with non-standard disks, be sure to consider load index: for Kodiaq it should be no lower J (600 kg per wheel).

⚠️ Attention: Discs with offset ET < 35 for Kodiaq not certified by the manufacturer. Their installation can lead to displacement of the steering axle and increased load on the wheel bearings.

Permissible deviations from standard parameters: what is possible and what is not

Many owners Skoda Kodiaq tend to install larger diameter wheels to improve appearance or dynamics. However, not all changes are safe. Let's consider the permissible limits:

• 🔼 Diameter: An increase of +1" from the standard size is possible provided that the tire profile is reduced (for example, with 235/60 R18 on 235/55 R19). Exceeding more than 2" requires changing the ESP settings.
• ↔️ Width: Maximum expansion is +1.5" from the factory value (for example, with 7.5J up to 9J). Wider discs may interfere with calipers or suspension components.
• ↕️ offset (ET): The deviation is ±5 mm. Reducing overhang (for example, with ET45 up to ET35) visually “spreads” the wheels, but increases the load on the hubs.

Example of a safe upgrade: for Kodiaq Style 2020 with factory wheels 8J x 19 ET42 can be installed 8.5J x 20 ET38 with tires 255/45 R20. However, such a kit will require:

- Compatible with brake mechanisms (clearance to caliper at least 5 mm)

- Adjustment of tire pressure (indicated on the sticker in the doorway)

- Flashing the ABS block (for disks >20")

- Balancing taking into account the weight of new wheels (maximum difference between wheels is 20 g) -->

For 2023-2026 models with the system Dynamic Chassis Control (DCC) installation of discs with a diameter of more than 20" requires mandatory adaptation of shock absorbers through diagnostic equipment. Otherwise, the system may generate an error P1650:00 (mismatch of wheel parameters).

How to choose the right wheels for Skoda Kodiaq: step-by-step instructions

To avoid mistakes when choosing disks, follow this algorithm:

1. Define the basic parameters your Kodiaq:
   • Year of manufacture and equipment (look in the vehicle title or on the nameplate in the glove compartment).
   • Engine type (eg 2.0 TDI CRTD).
   • Availability of options: Sportline, Scout, Laurin & Klement.
2. Check compatibility by VIN code on official resources:
   • Service Škoda Wheel Configurator.
   • Database ETO (European Tyre and Rim Technical Organisation).
3. Consider seasonality:
   • For winter tires, the recommended diameter is 1" smaller than summer tires (for example, 18" instead of 19").
   • When using studded tires, the width of the rim should not exceed 8J.

If you choose discs of non-original design (for example, from BBS or OZ Racing), be sure to check:

• 🔧 Material: For Kodiaq with a weight of more than 2 tons, forged or cast wheels with a certificate are recommended TÜV.
• 🔴 Color: Glossy coated wheels (glossy black) require more frequent maintenance due to visible scratches.

Top 5 mistakes when choosing drives for Kodiaq and how to avoid them

Even experienced car owners sometimes make critical mistakes. Here are the most common of them:

1. Ignore center hole (DIA).

   Discs with DIA 66.6 (for example, from Audi Q7) can be physically installed on Kodiaq through adapter rings, but this will lead to steering wheel vibration at speeds above 120 km/h. Always choose discs with DIA 57.1.

2. Disc weight not taken into account.

   Forged wheels weigh 20–30% less than cast wheels, which improves dynamics. However for Kodiaq with diesel engines (2.0 TDI) wheels that are too light can reduce grip on wet roads.

3. Purchasing discs without taking into account the brake system.

   On versions with brakes Brembo (for example, Kodiaq RS) minimum disc diameter - 19". Installation 18" will lead to contact with the caliper.

Another typical problem is PCD mismatch. For example, disks from Volkswagen Tiguan (also 5×112) may not fit due to differences in the shape of the mounting holes. Always check the manufacturer's catalogue.

⚠️ Attention: Discs with an asymmetrical pattern (for example, Rotiform LAS-R) require strict connection to the installation side (left/right wheel). Mixed-up discs lead to imbalance and vibration.

Recommendations for the care and operation of wheels on the Skoda Kodiaq

Even the highest quality wheels require regular maintenance, especially on Russian roads. Here are the key rules:

• 🧼 Washing: Use only acid-free shampoos (eg. Sonax Full Effect). Abrasive brushes scratch the paintwork.
• 🔧 Balancing: After each impact with an obstacle (for example, a hole), check the balance. An imbalance of 10 g at 140 km/h is equivalent to hitting the suspension with a hammer every 2 seconds.
• ❄️ Winter operation: After traveling with reagents, rinse the discs with water - salt corrodes aluminum in 2-3 seasons.

For alloy wheels Kodiaq Annual treatment with a protective compound is recommended (for example, Ceramic Pro Wheel). This prevents corrosion and makes cleaning brake dust easier. Forged wheels are less susceptible to oxidation, but require checking for microcracks every 50,000 km.

What to do if the disk is bent?

If the steering wheel begins to wobble after an impact, do not rush to change the disc. In 70% of cases, alloy wheels can be restored on a specialized machine (the service is called “rolling”). Cost - from 2,500 rubles. per wheel. However, such repairs are unacceptable for forged wheels: they lose their strength characteristics.

FAQ: Frequently asked questions about wheels for Skoda Kodiaq

Can I get 22" wheels on the 2023 Kodiaq?

Technically yes, but it would require:

• Low profile tire installations (e.g. 275/30 R22).
• Suspension modifications (shorter springs or pneumatic).
• Reprogramming the ABS and ESP unit.

The manufacturer does not recommend such an upgrade due to the increased load on the transmission.

What wheels are suitable for other VAG models?

Full PCD and DIA compatibility for:

• Volkswagen Atlas (2018–2026).
• Audi Q7 (4M, 2015–2020).
• Porsche Cayenne (92A, basic versions).

However, discs from Touareg or Bentayga will not fit due to another flight.

How to check the authenticity of original Škoda wheels?

On the inside of the original discs there should be:

• Logo Škoda with a hologram.
• Article number (for example, 5Q0 601 025 B).
• Marking TÜV Approved or SAE J2530.

Counterfeits often have blurry engravings and weigh 10–15% less than the original.

Which is better: cast or forged wheels for Kodiaq?

Comparison:

Parameter	Alloy wheels	Forged wheels
Weight (19")	10–12 kg	7–9 kg
Strength	Medium (cracks when hit hard)	High (bends but does not break)
Price	From RUB 8,000/piece.	From RUB 25,000/piece.

For city use, alloy wheels from premium brands are sufficient (Ronal, AEZ). Forged ones are justified for off-road or sporty driving.

Do I need to change bolts when changing discs?

Yes, if:

• Install discs with a different PCD (for example, with 5×112 on 5×120 - eccentric bolts will be required).
• Switch to discs with recessed mounting holes (you need bolts with extended threads).

Original bolts for Kodiaq: N 910 137 01 (length 27 mm, thread M14×1.5).