Podiums for Škoda Octavia Tour - this is not just a tuning element, but a practical solution for improving the sound of an audio system or organizing additional space in the trunk. Owners of this model are often faced with the problem of inconvenient placement of standard speakers or the need to optimize load capacity. In this article we will look at what types of podiums exist and how to choose them correctly for a specific modification. Octavia Tour (including restyled versions), and we will also give step-by-step instructions for installation and integration with factory acoustics.

Feature Octavia Tour — its universal body, which requires a specific approach to installation. For example, podiums for the rear speakers should take into account the shape of the trunk and not interfere with the folding of the seats. And front podiums are often combined with the replacement of standard speakers with component systems. We analyzed the experience of owners, the technical characteristics of popular models and collected current data on prices in 2026 - so that you can make an informed decision without extra costs.

Why are podiums needed in the Škoda Octavia Tour?

The main function of podiums is sound direction adjustment and improved acoustic performance. Standard Octavia Tour Speakers are often mounted at a non-optimal angle, causing sound to bleed into the floor or trunk rather than to the passengers' ears. Podiums allow:

  • 🔊 Point speakers at an angle 15-30° to the listener for a better scene.
  • 📦 Free up space in door panels (relevant for component systems).
  • 🔧 Protect the speakers from moisture and mechanical damage (especially important for versions with all-wheel drive 4x4).
  • 🎛️ Integrate additional tweeters or midbass without altering the interior.

The second key point is luggage compartment organization. Rear parcel trays (above the wheel arches) provide a flat surface for carrying cargo without sacrificing sound. For example, in Octavia Tour 2017+ standard speakers 6×9" often interfere with the placement of long items. Podiums solve this problem by raising the speakers to 3-5 cm and forming a flat platform.

⚠️ Attention: In models with the system Canton or Dynaudio (optional UH1/UH2) standard podiums have a non-standard shape. Replacing them may require modification of the mounts or the purchase of adapters.

Types of podiums for Octavia Tour: which one to choose?

Podiums for Škoda Octavia Tour are divided into three main categories:

  1. Front (door) - for speakers 16.5 cm or 17.8 cm (depending on the year of manufacture). Most often made of ABS plastic or fiberglass.
  2. Rear (shelf) - for speakers 6×9" or 6.5". They can be solid (for closed installation) or open (for component systems).
  3. Universal — height-adjustable, suitable for non-standard speaker systems.

When choosing, pay attention to:

  • 📏 Speaker size: Standard holes in Octavia Tour until 2020 - 6×9" behind and 16.5 cm front. May differ in restyled models (2021+).
  • 🔩 Mounting type: Most podiums attach to stock holes, but some require drilling (for example, for models with Virtual Cockpit).
  • 🎨 Material: Plastic is cheaper, but less durable; fiberglass or carbon fiber is more expensive, but can withstand loads up to 20 kg to the podium.
Type of podium Material Compatibility Average price, rubles
Front (door) ABS plastic Octavia Tour 2013–2020 1 800–3 500
Rear (shelf) Fiberglass Octavia Tour 2017–2023 (6×9") 2 500–5 000
Universal adjustable Aluminum + plastic All generations (needs improvement) 4 000–7 000
Podium for subwoofer Chipboard + vibration absorber Only for trunk (10"/12") 6 000–12 000

For owners Octavia Tour with the system Dynaudio We recommend paying attention to the podiums from Heco or Eton — they have special adapters for standard mounts and do not require drilling. If you are planning to install component acoustics (for example, Focal PS 165 or Morel Tempo Ultra), choose podiums with adjustable angles - this will allow you to more accurately set the stage.

📊 What type of podiums are you planning to install?
  • Front (door)
  • Rear (shelf)
  • Universal
  • Podium for subwoofer
  • I haven't decided yet

Top 5 podiums for the Škoda Octavia Tour: ranking 2026

Based on reviews from owners and tests by independent experts, we have compiled a rating of the best podiums for Octavia Tour. The selection criteria were compatibility, quality of materials and price/quality ratio.

  1. Heco Octavia Tour Rear (6×9")
    Material: fiberglass + vibration-absorbing layer.
    Pros: exact fit without modifications, fastening to standard holes, weight up to 1.2 kg.
    Cons: high price (~4 800 ₽).
    Suitable for: Octavia Tour 2013–2023 (all trim levels).
  2. Eton PSR 165 Octavia
    Material: ABS plastic with metal inserts.
    Pros: adjustable tilt angle (0–25°), compatible with component systems.
    Cons: requires careful installation (fragile latches).
    Suitable for: front speakers 16.5 cm (2017+).
  3. Audio System AS-OCT-R
    Material: carbon fiber.
    Pros: minimum weight (0.8 kg), does not resonate at high frequencies.
    Cons: only for rear shelf, not compatible with Dynaudio.
    Suitable for: Octavia Tour 2020–2026 (6×9").

Important: Podiums from Audio System and Heco certified for use with systems Škoda Sound and do not void the warranty for audio equipment (when installed in official services).

If you are looking for a budget option, pay attention to the podiums from CarPoint (price from 1 500 ₽), but be prepared to modify the fasteners - they do not always exactly match the standard holes. For DIY lovers, universal podiums from Rockford Fosgate, which can be cut to the desired size.

Step-by-step instructions for installing podiums

Installation of podiums in Škoda Octavia Tour does not require special skills, but will require accuracy and a set of tools. Let's look at the process using the example of rear podiums for speakers 6×9":

T25 and T30 screwdriver|Plastic clips (10 pcs.)|3M double-sided tape|Multimeter for checking wiring|Soldering iron (if changing speakers)-->

Step 1. Removing the trunk trim

Remove the plastic trim above the wheel arches. To do this:

  1. Unscrew the two screws under the plugs (use a screwdriver T25).
  2. Carefully pry up the clips with a flathead screwdriver, starting at the corner on the door side.
  3. Disconnect the trunk light connector (if equipped).

Step 2. Removing stock speakers

The standard speakers are mounted on four self-tapping screws. Unscrew them and disconnect the terminals, having first photographed the connection diagram (or marked the wires). Don't pull the wires — in Octavia Tour they are often soldered to the amplifier board.

⚠️ Attention: In models with Dynaudio The speakers are connected through a separate amplifier (located under the trunk shelf). When replacing, you will either need to use a standard amplifier (with adapters) or completely change the wiring.

Step 3. Installation of podiums

The podiums are attached either to standard holes, or (in the case of universal models) with double-sided tape 3M VHB. To be safe, we recommend combining both methods:

  1. Try on the podium and mark drilling locations (if required).
  2. Apply tape to the supporting surface of the podium and press it onto 30–60 seconds.
  3. Secure with screws (if there are standard holes) M5.

Step 4: Connecting Speakers

If you are changing speakers, use parallel connection (to maintain impedance) or install an external crossover. B Octavia Tour with the system Canton You may need to disable sound correction in the menu MIB2/MIB3 (path: Settings → Sound → Equalizer → Reset).

How to check speaker polarity?

Connect the speaker to a 9V battery: if the cone moves forward, the polarity is correct. B Octavia Tour standard pinout: + - brown wire, − - gray.

Integration of podiums with an audio system: nuances

Installing podiums is only half the battle. To make the sound play in a new way, you need to properly configure the audio system. B Škoda Octavia Tour There are several key points:

  • 🔧 Equalizer settings: After installing the podiums, reset the sound settings to factory settings (Settings → Sound → Reset) and configure again. In systems Dynaudio use preset "Jazz" to check the scene.
  • 🎚️ Channel balance: Podiums can change stereo perception. In the menu MIB adjust the front/rear speaker balance (optimally: 60% front, 40% rear).
  • 🔇 Noise reduction: B Octavia Tour with Virtual Cockpit There may be background noise due to interference. The solution is to install capacitors to power the amplifier.

If you have installed component speakers, be sure to configure the crossovers. For Octavia Tour recommended crossover frequencies:

  • Twitters: 3,500 Hz (12 dB/oct).
  • Midbass: 80 Hz (18 dB/oct).
  • Subwoofer (if equipped): 60–80 Hz.

For fine tuning, use test tracks (for example, "Sweep Tone" from AudioCheck) and a multimeter to check the signal level. In models with Amundsen or Columbus Configuration is conveniently carried out through a hidden menu (activated by holding down the buttons "Setup" + "Nav" within 10 seconds).

💡

If, after installing the podiums, a whistle appears at high frequencies, check the tightness of the speakers. B Octavia Tour gluing the joints with a vibration absorber often helps (for example, StP Gold).

Tuning podiums: how to make them unique

Podiums are not only a functional, but also a decorative element. Many owners Octavia Tour modify them to suit the style of the salon. Here are some ideas:

  • 🎨 Coloring: Use automotive paint (such as Motip) in body color or a contrasting shade. Before painting, degrease the surface and apply primer.
  • 🔥 Backlight: Install LED strip around the perimeter of the podium (for example, Philips Hue controlled via app). B Octavia Tour convenient to connect to the wire +12V from the trunk light.
  • 🛠️ 3D printing: Order custom podium overlays with logo Škoda or your nickname. Printable files can be found at Thingiverse (search for "Octavia Tour podium").
  • 🧵 Upholstery: Alcantara or leather (color to match the seats) is suitable for the rear podiums. Glue on 3M Super Trim.

If you want to completely hide the podiums, use camouflage grilles from DLS or Rainbow. They are attached with magnets and do not interfere with the sound, but visually make the installation invisible.

For fans of extreme tuning there is an option with active podiums - mini-amplifiers are built into them (for example, Alpine KTA-450). This eliminates the need for an external amplifier, but requires a separate power supply (4 GA cable).

💡

When tuning podiums, do not forget about weight: exceeding the load on the rear shelf is more 10 kg may lead to deformation (especially in models before 2017).

Common mistakes and how to avoid them

Even experienced car enthusiasts make mistakes when installing podiums. Here are the most common ones and how to prevent them:

  1. Wrong size choice

    Problem: The podiums do not fit into the standard holes or block access to the seat mounts.

    Solution: Before purchasing, check with Škoda configurator — the exact dimensions of the speakers for your configuration are indicated there. For example, in Octavia Tour Scout The rear speakers have a non-standard diameter 18 cm.

  2. Ignoring vibration isolation

    Problem: The podiums resonate in the bass, causing rattling.

    Solution: Before installation, cover the podium with a vibration absorber (StP Bimast Bomb) and sound insulation (Accent Premium). Pay special attention to the joints with the body.

  3. Incorrect connection

    Problem: The speakers are out of phase or there is no sound.

    Solution: Always check the polarity with a multimeter. B Octavia Tour with MIB3 If the connection is incorrect, the amplifier protection may be triggered (error "Audio Error" on the screen).

Another common mistake is rear shelf overload. B Octavia Tour maximum load on the trunk shelf - 50 kg, but it should be distributed evenly. If you are installing heavy podiums (for example, with a subwoofer), reinforce the shelf with metal spacers or transfer some of the weight to the trunk floor.

⚠️ Attention: In models with Virtual Cockpit panel and the system Dynaudio replacing rear speakers without an adapter may result in an error "Amplifier Fault". The solution is to use a load emulator (for example, DLS UC-1).

FAQ: Answers to frequently asked questions

Can podiums be installed on an Octavia Tour with the factory Canton system?

Yes, but you will need special adapters for mounting (for example, from Audio System). Standard speakers Canton have a non-standard connector, so when replacing you need to either solder the wires or use adapters ISO-Canton.

Which podium material is better: plastic or fiberglass?

Fiberglass is preferable - it does not resonate at high frequencies and can withstand heavy loads. Plastic podiums are cheaper, but can vibrate when playing loud music. For a bass amplifier (subwoofer), choose only fiberglass or carbon fiber.

Do I need to remove the door trim to install the front podiums?

Yes, but in Octavia Tour this can be done without complete dismantling: just bend the lower part of the casing (attached with 4 clips) and unscrew the speaker through the technological hole. For models with heated seats, be careful not to damage the heating element wires.

Can Octavia Liftback podiums be used on the Tour?

No, due to the different shape of the trunk. Podiums for Liftback shorter and narrower, and in Tour they will not block the wheel arches. The exception is universal adjustable models, but they will have to be trimmed.

How to avoid "Audio Error" after installation?

This error appears when:

  • Short circuit in the wiring (check with a multimeter).
  • Speaker impedance mismatch (the standard amplifier is designed for 4 ohm).
  • No load (if you removed the standard speakers, install resistors 4 Ohm/50 W).

Solution: Reset the audio system settings through the hidden menu (Settings → Diagnostics → Reset audio).