Painting of the ŠKODA Octavia A7: step-by-step instructions from preparation to polishing

Painting ŠKODA Octavia A7 Whether it is small scratches from parking, chips from gravel on the highway or full recovery of the LCP after an accident, the quality of work directly affects not only the appearance, but also the protection of the body from corrosion. In this article we will analyze all stages of the process: from the diagnosis of damage to the final polishing, and also reveal key mistakes, which even professionals admit.

Feature Octavia A7 (2013-2020) – the use of a galvanized body with a multi-layer factory coating. This complicates the selection of paint and requires strict adherence to the technology. For example, improper surface preparation can lead to the detachment of a new layer after a year, and the savings on primer - to the manifestation of rust under the varnish. We have collected relevant data on Prices for materials and services in 2026We compared the methods of local and complete staining, and also prepared a checklist for independent work.

1. Diagnosis of damage: when painting is needed, and when polishing is enough

Before you take a can or go to the car service, determine depth of defect. Surface scratches (up to a layer of varnish) are often removed by polishing, but chips to the ground or metal require a full restoration of the LCP. Do a simple test:

• 🔍 Scratching on the varnishIf the nail does not cling to the edge, the defect is superficial. Enough abrasive polishing.
• 🚗 Flip to the ground: visible white or gray layer under the paint. Local staining is required.
• ⚠️ Damage to metal: rust or gloss of bare body. You need corrosion treatment + a full cycle of painting.
• 💥 A dent with a cracked LCP: combined repair (richtovyu + painting).

On Octavia A7 most often suffer:

• 🚪 The front of the hood (from the chipped stones).
• 🚗 The back arches (from sandblasting in winter).
• 🔑 Door handles and rapids (mechanical scratches).

⚠️ AttentionIf the stains have already appeared on the chips, do not limit yourself to painting. The corrosion will spread under a new coat of paint. Be sure to use it. rust converter (for example, Loctite 7503) and corrosion-resistant soil.

For an accurate diagnosis, use LCD gauge (for example, Etari ET-11P). Norm for Octavia A7 - 120-160 microns. If the reading is below 90 microns, the body has already been repainted, and the adhesion of the new layer may be weak.

2. Selection of paint: original codes, analogues and application technologies

Factory coverage ŠKODA Octavia A7 It consists of 4-5 layers: phosphation, cathode priming, base layer, varnish (sometimes with the effect of "metallic" or "pearl"). For the exact selection of paint you will need color code, which is indicated:

• 📄 On the glove compartment nameplate (e.g., 5G5G5 for Race Blue).
• 🚗 In the service book (section "Color of the body").
• 🔍 On the website ŠKODA by VIN code.

Popular colors Octavia A7 and their codes:

Color	Code	Paint type	Cost of the basic set (paint + varnish), rubles
Race Blue (Blue Metallic)	5G5G5	Metallic	4 200–5 800
Brilliant Silver (Silver)	9U9U	Metallic	3 800–5 200
Cappuccino Beige (Beige)	1T1T	Mother of pearl	5 500–7 000
Magic Black (Deep Black)	2T2T	Acrylic	3 500–4 800
Moon White (White)	0R0R	Acrylic	3 200–4 500

For self-painting, choose between:

• 🎨 Acrylic paints (for example, Mobihel or Duxone): easy to apply, but less durable.
• 💎 Base + varnish (for example, PPG or Sikkens): professional solution for metallics and pearls.
• 🔫 Aerosol cans (for example, Motip): convenient for local repairs, but require cleaning skills.

⚠️ Attention: Paints with the effect of "pearl" (for example, Cappuccino Beige) are applied in 3-4 layers with mandatory drying between them. If diluted incorrectly, the pigment will settle to the bottom, and the color will be uneven.

Critical error: using cheap paints without a UV filter (for example, Chinese counterparts). Nana Octavia A7 This causes pigment burnout after 1-2 seasons, especially in dark colors (for example, in the color of the color). Magic Black).

3. Body preparation: sanding, degreasing and priming

The quality of training depends on 80% of success. Even expensive paint will peel off if the surface is not cleaned of old LP, fat or corrosion. Algorithm of action:

Wash with car shampoo (for example, Karcher RM 801)| Removal of rust by the converter (e.g. Hi-Gear HG5718)| Sandpaper P80-P180 | Solvent degreasing (e.g. App W900) | Application of corrosion-resistant soil (e.g. Body 960) | Deep dents dents (e.g. Novol Plus 760) | Re-surfacing P320–P500| Compressed air blowing-->

Features for Octavia A7:

• 🔧 Plastic parts (bumpers, moldings) require special soil for plastic (for example, PPG DP401). Without it, the paint will crack.
• 🚗 Aluminum elements (In some versions, the hood is only polished) abrasive P240–P400 to avoid overheating.
• 💨 Dust in hard-to-reach places (for example, under door seals) remove compressed air or an antistatic wipe.

For sanding use eccentric (for example, Makita BO5041) with adjustable speed. On Octavia A7 optimal mode - 3000-4000 rpm. Manual grinding takes 3 times longer and is fraught with uneven transitions.

What happens if you miss the degreasing phase?

Without degreasing, microparticles of silicone (for example, from polyroles) or fat remain on the surface. The paint will lie unevenly, and after 2-3 months it will begin to bubble. Especially critical for metallics - the pigment "collects" in drops, and the color will be heterogeneous.

4. Painting technologies: local vs full, equipment and conditions

The choice of method depends on the area of damage and budget:

Method	Area	Pros	Cons	Cost (with materials), rubles
Local painting	Up to 30 cm2	Fast (1-2 days), cheap	Color transition is visible, less durable	2 500–8 000
Painting of the element (door, wing)	The whole thing	Smooth color, factory quality	Expensive, requires the detail removed	12 000–25 000
Full body painting	The whole car.	Perfect result, protection against corrosion	Very expensive, 5-7 days of work	80 000–150 000

Use local paint for local painting stencils (for example, from 3M) or paint tape with paper. Nana Octavia A7 complex areas - the joints of doors and roof: here the paint often "leaks" under the seals. To avoid this, stick a paint tape with indentation from the edge of the detail.

Equipment for professional painting:

• 🎨 Spray gun: for the base- SATAjet 4000 B (pressure 2-2.5 bar), for varnish - Iwata W-400 (1.5-2 bar).
• 💨 Compressor: minimum 50 litre receiver, capacity 300 l/min (e.g., Fubag VCF/500.50).
• 🌡️ Infrared drying: accelerates the polymerization of lacquer (for example, Elitech TP 2000K).

⚠️ AttentionWhen painting in the garage without hooding, use respirator (for example, 3M 6502). The isocyanate vapors in two-component varnishes are toxic and can cause chemical burns to the lungs.

The room temperature should be 20–25°C, humidity - no higher than 60%. On Octavia A7 with factory coating Waterborne (water-soluble paint) requires a special hardener (for example, PPG D8115).

5. Applying paint and varnish: step-by-step instructions with nuances for Octavia A7

The paint-painting process Octavia A7 It differs depending on the type of LCP. Let's look at the algorithm for the most common version. base + varnish:

1. Application of the base layer:

   • 🎨 Dilute the paint according to the instructions (usually) 2:1 with hardener + 10% diluent).
   • 🔫 Apply in 2-3 layers with interlayer drying for 5-10 minutes. Keep the gun at a distance. 15–20 cm at an angle of 90°.
   • ⚠️ On metallic materials (Race Blue, Brilliant SilverMake the first layer semi-dry (less paint, more air).

2. Applying varnish:

   • 💎 Use a varnish with a UV filter (for example, Sikkens Autoclear LV).
   • 🎯 Apply in 2 layers: the first is a thin "fog", the second is dense. Drying between layers - 15 minutes.
   • 🌡️ To accelerate polymerization, use IR drying (20 minutes at 60°C).

On Octavia A7 with color Magic Black or Moon White varnish 3 layers: This prevents drawdown and provides depth of color. For pearls (Cappuccino Beige) use pearl-varnish (for example, PPG D8125).

Typical errors in application:

• 🌪️ Dust in the paint: occurs when there is insufficient air filtration. Use a water separator (for example, Fubag CF 10).
• 💧 Slides: due to too thick paint or close range of the gun. Removed by grinding P1200 after drying.
• 🎨 Uneven color: most often on metallics. The reason is improper mixing of the pigment before application.

6. Polishing and paint protection: finishing work

After painting Octavia A7 The polish requires mandatory polishing. This removes micro-nervities, gives depth to the color and protects against UV rays. Stages:

1. Wet sanding:

   • 🧽 Use P1500–P2000 sandpaper with water.
   • 🔄 Grind with cross-shaped movements, constantly wetting the surface.

2. Polishing with abrasive paste:

   • 💎 For dark colors (Magic Black- pasta 3M 05974 (removes holograms)
   • 🌈 For metallics (Race Blue) — Menzerna PO 106 FA (restores gloss).

3. Protective coating:

   • 🛡️ Apply ceramic coating (for example, Ceramic Pro 9H) for protection against chipping.
   • 💧 WaxCollinite 845) - budget option, lasts 2-3 months.

On Octavia A7 with factory coating Waterborne Do not use pastes with a large abrasive (more than P2000) - this will damage the soft varnish. Use the quality of the polish to check the quality depthmeter (for example, Elcometer 456). The optimal value for gloss is 90-95 GU.

⚠️ AttentionAfter polishing, avoid washing the car for 7 days. The lacquer is fully polymerized after only a week, and early contact with water can cause clouding.

7. Cost of painting Octavia A7 in 2026: comparison of services and self-repair

Painting prices ŠKODA Octavia A7 vary depending on the region, the type of paint and the method of recovery. Current prices (Moscow and the region, June 2026):

Type of work	Cost of service, rubles	Cost of materials (independently), rubles	Lead Time
Local painting (split 2-5 cm)	3 000–7 000	800–1 500	1–2 days
Bumper painting	15 000–25 000	4 000–6 000	2–3 days
Hood painting	20 000–35 000	5 000–8 000	3–4 days
Full body painting	100 000–200 000	30 000–50 000	5–7 days
Polishing after painting	5 000–12 000	1 500–3 000	1 day

Savings when painting yourself is 50–70%, but requires the purchase of equipment (spray gun, compressor, drying). For example, a complete kit for local repairs will cost 25 000–40 000 ₽, but it will be enough for 5–10 repairs.

Where to order painting in Moscow:

• 🏆 Premium services: ŠKODA AutoHome (official dealer), Carville — 2-year warranty, price 30% higher than average.
• 💰 Middle segment: Body Repair in Varshavka, AutoMig - high quality, but without branded materials.
• 🔧 Budget workshops: AutoLak, Colored World — risk of color mismatch, but the price is 40% lower.

When choosing a service, check:

• 📋 Availability guarantees for painting (minimum 1 year).
• 🎨 Usage original materials (ask for paint certificates).
• 📸 Portfolio of works on cars of dark colors (all flaws are visible on them).

8. Common mistakes and how to avoid them

Even professionals make mistakes when painting. Octavia A7. Here TOP-5 errors and ways to prevent them:

1. Wrong color selection:

   • 🎨 Reason: Using universal codes instead of a spectrophotometer.
   • 🔧 Solution: Order a test paint on a plate made of the same material as the body.

2. Peeling of paint after 6–12 months:

   • 🧴 Reason: Poor preparation (residues of silicone or rust).
   • 🔧 Solution: Use anti-silicone degreaser (for example, App W700) and soil with zinc.

3. Visible transitions on metallics:

   • 🌈 Reason: Incorrect shading or mismatch in pigment particle size.
   • 🔧 Solution: Apply the base overlapping 5–10 cm beyond the damage.

4. Cloudiness of varnish after drying:

   • 💨 Reason: High humidity or dust in the room.
   • 🔧 Solution: Use dust-repellent cloth before applying varnish.

5. Corrosion under new paintwork:

   • ⚠️ Reason: The anti-corrosion treatment step has been skipped.
   • 🔧 Solution: Apply epoxy primer (for example, PPG DP40) onto bare metal.

On Octavia A7 with factory coating Waterborne You cannot use nitro enamels or alkyd paints - they are not compatible with water-soluble bases. Also avoid quick drying hairdryer: this leads to microcracks in the varnish.

FAQ: Answers to frequently asked questions

Is it possible to paint the Octavia A7 with a spray can without disassembling the parts?

Yes, but only for local damage (up to 10 cm²). To do this:

1. Sand the area around the chip with P500 sandpaper.
2. Apply primer from a can (for example, Kudo KU-7001).
3. Spray paint in 2-3 layers from a distance of 20 cm.
4. Varnish and polish with paste 3M 09374.

For large areas (for example, the entire bumper) the spray can is not suitable - transitions will be visible.

How long does the paint on the Octavia A7 dry after painting?

Drying time depends on the type of materials:

• 🎨 Acrylic paint: 24 hours until touch-free, 7 days until completely cured.
• 💎 Base + varnish: 48 hours before washing, 14 days before polishing.
• 🌡️ With IR drying: 6-8 hours until tack-free, but full strength after 5 days.

On Octavia A7 with factory Waterborne The varnish takes longer to polymerize - up to 21 days.

How to remove shagreen after painting?

Shagreen (orange peel) appears due to improper viscosity of the varnish or high temperature. Eliminated:

1. Wet sanding P1500–P2000.
2. Polishing with abrasive paste (Menzerna PO 203S).
3. By applying a protective coating (for example, Ceramic Pro Light).

If the shagreen is deep, re-applying the varnish will be required.

What is the difference between painting Octavia A7 FL (facelift) and pre-facelift?

Main differences:

• 🚗 pre-facelift (2013–2017): solvent-based paints are used (e.g. PPG Deltacron).
• 🆕 Facelift (2017–2020): water-soluble paints (PPG Envirobase), requiring a special hardener.
• 🎨 Color palette: shades have been added in the facelift Petrol Blue (K8K8) and Velvet Red (4U4U).

Materials for facelift are 15–20% more expensive due to environmentally friendly components.

Is it possible to paint an Octavia A7 in an unheated garage in winter?

Technically possible, but with reservations: