Škoda Octavia Tour is one of the most popular station wagons on the Russian market, and the right rear view mirror in this model often becomes the object of attention of owners. Whether due to accidental damage in the parking lot, or due to a manufacturing defect, or simply due to natural wear and tear, questions about replacing, adjusting and choosing a mirror arise regularly. In this article we will look at everything you need to know about the right mirror. Octavia Tour: from design features to step-by-step replacement instructions.

Feature of the right mirror in Octavia Tour (as in most European cars) - its increased radius of curvature, which expands the view, but at the same time distorts the distance to objects. This is not a defect, but a deliberate engineering decision that many drivers are unaware of. It is also important to consider that mirrors are Octavia third and fourth generations (including restyled versions) may differ in fastenings and connectors - we’ll talk about this in more detail.

Right mirror design Škoda Octavia Tour: what's inside?

Right mirror Octavia Tour is not just a piece of glass on a plastic base, but a complex assembly with several key elements:

  • 🔹 Mirror housing - usually made of ABS plastic, painted in body color. Heated versions have heating elements inside.
  • 🔹 Mirror glass - can be standard or with aspherical area (magnifying lens in the lower corner). In premium trim levels - with an automatic dimming function.
  • 🔹 Electric drive — is responsible for adjusting the position of the mirror. B Octavia Tour A worm gear motor is used, which can wear out over time.
  • 🔹 Wiring and connectors — supply power to the drive, heating and (in some versions) to the turn signal.

It is important to understand that the right mirror Octavia Tour not interchangeable with left - even if outwardly they look symmetrical. They have different mounting angles, bracket lengths, and sometimes even body shapes. Also, mirrors for markets with left-hand traffic (for example, Great Britain) and right-hand traffic (Russia) may have different viewing angles.

The table below compares the key characteristics of mirrors for different generations Octavia Tour:

Generation Mounting type Presence of heating Automatic folding Article number of the original glass
Octavia Tour A5 (2004–2013) 3 bolts, triangular bracket Option (depending on configuration) No 5E0 857 511/512
Octavia Tour A7 (2013–2020) Clips + 1 bolt, oval connector Standard in most versions Option (in packages Style and RS) 5E0 857 511 B/512 B
Octavia Tour A8 (2020–present) Boltless fastening, quick removal Standard Standard in Elegance and above 5Q0 857 511/512
⚠️ Attention: B Octavia Tour 2018–2020 model years (A7 facelift) mirrors can be equipped with two types of connectors - old (9-pin) and new (12-pin). Before purchasing a replacement, be sure to check the type of connector on your car!

How to choose the right mirror for Škoda Octavia Tour: original vs analogues

When choosing to replace the right mirror, owners Octavia Tour are faced with a dilemma: to take an original part or an analogue. Original mirrors from Škoda (items start with 5E0, 5Q0) guarantee one hundred percent compatibility, but their price can reach 15–20 thousand rubles. Alternatives - mirrors from HELLA, Valeo or Bosch - 30–50% cheaper, but here it is important to pay attention to:

  • 🔍 VIN matching — some analogues are suitable only for certain years of manufacture.
  • 🔍 Availability of certificate — non-certified mirrors may have distorted optics.
  • 🔍 Housing material — cheap plastic cracks in cold weather.
  • 🔍 Guarantee - for the original it is usually 2 years, for analogues - from 6 months.

If your budget is limited, you might consider used mirrors from disassembly, but there are risks here:

  • ⚠️ Electric drive wear - motors may be on the verge of failure.
  • ⚠️ Scuffed glass — even minor scratches impair visibility.
  • ⚠️ Corrosion of brackets - especially relevant for cars from Europe.

For Octavia Tour A7 and A8 have good reviews for mirrors from HELLA (articles 8DL 355 007-541 for the right) and Valeo (453505). They retain the original geometry and are suitable for heated mirrors.

📊 Which mirror would you prefer to replace?
  • Original Škoda
  • Analogue (HELLA, Valeo)
  • Used from disassembly
  • I haven't decided yet

Step-by-step instructions: how to remove the right mirror on Octavia Tour

Replacing the right mirror with Škoda Octavia Tour does not require special skills, but it is important to follow the algorithm so as not to damage the wiring or plastic clips. Tools you will need:

  • 🔧 Flathead screwdriver or plastic pick.
  • 🔧 Phillips screwdriver (for mounting bolts).
  • 🔧 Multimeter (to check the heating circuit).
  • 🔧 Electrical tape or heat shrink (for wiring repairs).

The process of removing the mirror differs depending on the generation of the car. Let's consider the most difficult option - Octavia Tour A7 (2013–2020):

  1. Disconnect the negative terminal of the battery (required!) to avoid short circuit.

  2. Remove the interior lining of the door. For this:

    • Use a screwdriver to pry the clip near the door handle.
    • Gently pull the panel towards you, starting from the bottom edge.
    • Disconnect the power window button connectors.

  • Locate the mirror's power connector (usually white or gray) and disconnect it. In some versions it is hidden under sound insulation.

  • Unscrew the three mirror mounting bolts (at Octavia Tour A7 they are located under a triangular plastic cover at the base of the mirror).

  • Carefully pull the mirror out by pulling it towards you. Be careful - the wiring may be firmly fixed inside the door.

    • B Octavia Tour The A8 mirror is mounted on clips, and to remove it it is enough to:

    1. Disconnect battery.
    2. Press the lock on the bottom of the mirror (door side).
    3. Pull the mirror towards you until it clicks.

    No corrosion on the door bracket|Integrity of wire insulation|Coincidence of power connectors|Motor performance (check with a multimeter)-->

    ⚠️ Attention: B Octavia Tour With the automatic folding mirror function, when removing the mirror, an error may occur in the door control unit. After installing a new mirror, an error reset via a diagnostic scanner is required (for example, VCDS or OBDeleven).

    Installing and setting up a new mirror: nuances for Octavia Tour

    Installing a new mirror proceeds in the reverse order, but there are several critical points:

    • 🔌 Connector connection — make sure that the contacts are not oxidized. B Octavia Tour A7 there is often a problem with oxidation of the heating contacts (yellow and brown wires).
    • 🔧 Bolt tightening - don’t overtighten! The optimal tightening torque is 2–2.5 Nm. Tightening too tightly may deform the plastic housing.
    • 🔄 Checking work — before assembling the door, check:
      • Mirror adjustment (all directions).
      • Heating operation (turn it on for 1–2 minutes).
      • Turn signal (if equipped).

    After installing the mirror, you need it adjust correctly. B Octavia Tour The following setting is recommended:

    1. Sit in the driver's seat in your usual position.

    2. Adjust the mirror so that you can see:

      • 1/3 of the rear wing of the car.
      • The horizon is at the level of the middle of the rear window.
      • A viewing angle that allows you to see a car in the next lane (without turning your head).

  • Check for the absence of “dead spots” - to do this, ask an assistant to walk around the car at a distance of 1–1.5 meters from the bumper. You should see it in the mirror all the way.

    • If the mirror is equipped automatic dimming, make sure that the light sensor is not covered with tinting or stickers. B Octavia Tour A8 This feature may conflict with some tint films.

    💡

    If after replacement the mirror “buzzes” when moving, check the tight fit of the housing to the door. Often the problem is solved by placing a thin rubber strip between the bracket and the mirror.

    Typical problems with the right mirror Octavia Tour and their solutions

    Owners Škoda Octavia Tour often encounter several typical malfunctions of the right mirror. Let's look at the most common ones and how to eliminate them:

    Problem Possible reason Solution
    The mirror is not adjustable with a button
    • Broken wire in the door corrugation.
    • Motor failure.
    • Oxidation of contacts in the control unit.
    • Test the circuit with a multimeter.
    • Replace the motor (part number 5E0 857 551).
    • Clean the contacts in the block (located under the door trim).
    Heated mirror does not work
    • Fuse F37 (10A) has blown.
    • Broken heating element.
    • Relay J317 faulty.
    • Check the fuse in the block under the steering wheel.
    • Replace the heated glass (cannot be repaired).
    • Ring the relay (located in the block under the hood).
    The mirror vibrates at speed
    • The fastening is loose.
    • Bracket deformation.
    • Wear of plastic bushings.
    • Tighten the fastening bolts.
    • Replace the bracket (part no. 5E0 857 651).
    • Install new bushings (kit 5E0 857 663).

    The problem with automatic folding mirrors. B Octavia Tour A7 and A8 this function often fails due to:

    • 🔋 Discharged battery - when the voltage is low, the control unit turns off the motors.
    • 🔧 If the guides are dirty, just clean them with silicone grease.
    • 🔌 Failure in the settings - the comfort unit needs to be re-flashed (BCM).
    How to reset mirror error via VCDS?

    1. Connect the scanner to the diagnostic connector.

    2. Select a block 52 – Door Electr. Driver.

    3. Go to Adaptation and select a channel Spiegelansteuerung.

    4. Enter value 1 to reset the error.

    5. Save the settings and reboot the unit (turn off/on the ignition).

    Tuning the right mirror Octavia Tour: what can be improved?

    Many owners Škoda Octavia Tour want to upgrade the right mirror to improve functionality or appearance. Here are some popular modifications:

    • 🔥 Installing a mirror with a turn signal — if it is not included in your configuration, you can install a mirror from Octavia RS (article 5E0 857 511 C). The wiring will need to be modified.
    • 🔥 Mirror glass tinting — use a special film for car windows (for example, LLumar). It is important not to cover the auto dimming sensor.
    • 🔥 Installing a rear view camera in the mirror — universal kits with cameras in the mirror housing are suitable for this (for example, from Rear View Safety).
    • 🔥 Replacement with a mirror with function Blind Spot Detection - suitable for Octavia Tour A8, but requires system integration Lane Assist.

    When tuning, it is important to remember legal restrictions. For example, in Russia it is prohibited:

    • ❌ Install mirrors with heavily tinted windows (light transmission less than 70%).
    • ❌ Use led repeaters, not certified for road use.
    • ❌ Modify mirrors if necessary impairs visibility (for example, installing wide stickers).

    If you plan to install a mirror with automatic dimming, please note that in Octavia Tour Until 2020, this requires replacing the door control unit (article no. 5Q0 959 592 for A8).

    💡

    Any modifications to mirrors that affect electrics (heating, repeaters, cameras) require checking the circuit with a multimeter to avoid short circuits.

    Where to buy the right mirror for Škoda Octavia Tour: verified sources

    Choosing where to buy a mirror depends on your priorities: price, delivery speed or warranty. Let's look at the main options:

    Source Pros Cons Average price (right heated mirror)
    Official dealer Škoda
    • 100% original.
    • 2 year warranty.
    • Checking compatibility by VIN.
    • Expensive (15–25 thousand rubles).
    • Long wait (if out of stock).
    		 18 000–22 000 ₽
    Online stores (Exist, Autodoc, Kolesa-darom)
    • Fast delivery.
    • Wide selection of analogues.
    • There are often discounts.
    • Risk of running into a fake.
    • Difficult to check compatibility.
    		 8 000–15 000 ₽
    Dismantling (Drom, Avito, local service stations)
    • Low price (RUB 3,000–7,000).
    • You can find a mirror in good condition.
  • No guarantee.
  • Risk of hidden defects.
    		•  4 000–10 000 ₽
    Czech and German online stores (Skoda-Teile24, Autoteile-Meile)
    • Original parts at prices lower than those from the dealer.
    • Wide range for older models.
    • Long delivery (2–4 weeks).
    • Customs risks.
    		 12 000–18 000 ₽

    When purchasing from a salvage yard or from private sellers, be sure to ask for:

    • 📸 Photo of the connector - it must match yours.
    • 📄 Return Guarantee (at least 3–7 days).
    • 🎥 Video of work electric drive and heating.

    For Octavia Tour A8 is worth paying attention to stores specializing in MQB platform (for example, MQB-Tuning), since mirrors for this generation are often unified with Audi A3 and VW Golf.

    FAQ: Frequently asked questions about the right mirror Škoda Octavia Tour

    Is it possible to install the right mirror from Octavia sedan on Octavia Tour?

    Yes, mirrors from a sedan and station wagon (Tour) are completely interchangeable, since the body panels and doors of these models are identical. An exception is mirrors with turn signals: in Octavia RS they may differ in shape.

    Why is the right mirror in Octavia Tour distorts the image more than the left one?

    This is done specifically to expand the viewing angle. The right mirror has aspherical area (a convex lens in the lower corner), which increases the field of view but distorts the distance to objects. The left mirror is usually flat for accurate distance estimation.

    How to check if the heated mirror works without removing it?

    Turn on the heating (the button is usually located next to the rear window heating control) and after 1-2 minutes touch the mirror glass. It should be warm. You can also listen: when the heating is operating, a slight cracking sound is sometimes heard (this is normal).

    What should I do if, after replacing the mirror, it moves randomly?

    This is a sign of a problem door control unit or adjustment motor. Try resetting the mirror settings using the diagnostic scanner (Basic Settings in the block 52). If the problem remains, the motor or unit needs to be replaced.

    Is it possible to paint the mirror body yourself?

    Yes, but for this you need:

    1. Remove the mirror and clean the body of old paint (sandpaper P800).
    2. Degrease the surface (Antisilicone or white spirits.
    3. Apply plastic primer (e.g. Plasti Dip).
    4. Paint in 2-3 layers with auto enamel (use a can with the color code for your car).
    5. Coat with varnish to protect against chipping.

    Important: do not paint the mirror glass - it will worsen your view!