ŠKODA Kodiaq 2018 bolt pattern: how to choose wheels and tires without errors

Selection of rims for ŠKODA Kodiaq 2018 is a task that requires attention to detail. An error in the bolt pattern parameters can lead not only to visual imbalance, but also to serious control problems, suspension wear, or even emergency situations. In this article we will look at all key parameters: from standard PCD 5×112 to permissible overhang values (ET) and the diameter of the central hole (DIA).

Model Kodiaq first generation (2017–2023), which includes the 2018 version, is built on the platform MQB concern Volkswagen Group. This means that many wheel parameters are the same as other cars in the group - for example, Volkswagen Tiguan or Audi Q5. However, there are nuances associated with the weight and dimensions of the crossover, which affect the choice of wheels and tires. We have gathered up-to-date data from official sources, as well as the experience of the owners, to help you avoid typical mistakes.

What is a bolt pattern and why is it important for the 2018 Kodiaq

Term bolt pattern (or PCD — Pitch Circle Diameter) indicates the diameter of the circle on which the wheel mounting holes are located. For ŠKODA Kodiaq 2018 this parameter is fixed: 5×112. That means the disk has 5 holes, located on a circle with diameter 112 mm.

Why is this critical? Inconsistency PCD leads to the fact that the disk does not sit evenly on the hub: even if the bolts are screwed in, the wheel will be installed skewed. Consequences:

• 🔧 Vibration speeds over 80 km/h, especially noticeable on the steering wheel.
• 🚗 Uneven wear Hub tires and bearings.
• ⚠️ Risk of wheel separation When braking emergency or on uneven road.

Except PCD, when selecting disks for Kodiaq take into account:

• 📏 Departure (ET) — the distance from the mating plane of the disk to its center. For Kodiaq 2018 standard departure is no ET45–ET50.
• 🕳️ Central hole diameter (DIA) - must be no less 57.1 mm (hub standard).
• 🔄 Disc width (J) - from 7J up to 8.5J depending on the size of the tyre.

⚠️ Attention: Discs with ET less 40 or more 55 They can touch the arches or arches. Before buying, check compatibility on specialized services such as WillTheyFit or DiskiOnline.

Standard and acceptable disk parameters for Kodiaq 2018

Factory wheel parameters for ŠKODA Kodiaq 2018 depends on the configuration and engine. Below is a table with official data for the most common versions:

Equipment / Engine	Disk size	Tire size	PCD	ET (mm)	DIA (mm)
Ambition / 1.5 TSI (150 hp)	7J×17	215/65 R17	5×112	45	57.1
Style / 2.0 TDI (150–190 hp)	7.5J×18	235/55 R18	5×112	48	57.1
Sportline / 2.0 TSI (180-220 hp)	8J×19	235/50 R19	5×112	50	57.1
RS / 2.0 TSI (245 hp)	8.5J×20	255/40 R20	5×112	52	57.1

Important: parameters for Kodiaq RS (2018–2023) may differ due to sport suspension and increased wheel arches. For example, this version is set to disks with ET52 and tyres wide 255 mmThis is unacceptable for basic equipment.

Permissible deviations from standard parameters:

• 🔄 Disc width: can be increased by +0.5–1J (for example, instead of 7J put 7.5J) but the tyres shall correspond to the new width.
• ↕️ Diameter: elevation R17 up to R20 possibly, but requires the selection of tires with the preservation of the outer diameter of the wheel (for example, 235/50 R19 instead of 215/65 R17).
• ⚖️ Departure (ET): deviation ±5 mm It is usually safe, but it is best to check on WillTheyFit.

How to check the bolt pattern on your Kodiaq: step-by-step instructions

If you are not sure about your car’s parameters, you can determine them yourself. Here's how to do it:

1. Check the sticker on the driver's door. It contains the recommended tire and disc sizes. For example, the inscription 215/65 R17 96H This means that the standard disk is R17.
2. Measure PCD:
   • 📏 Take a caliper or ruler.
   • 🔍 Measure the distance between the centers of two adjacent holes (for example, 70 mm).
   • 🧮 Multiply by the factor for 5 holes: 70 x 1.701 = 119.07 mm (round up to 112 mm).

Check ET: Place the disc on a flat surface, attach a ruler to the rim and measure the distance to the mating plane.

Specify DIA: Measure the diameter of the central opening of the disk.

For accuracy use online bolt pattern calculatorsFor example, on the website DiskiOnline or Koleso.ru. It is enough to enter the number of holes and the distance between them - the service will calculate PCD.

Measure PCD and ET on current disks

Check Compatibility with WillTheyFit

Clarify the width and diameter of the tires in the documentation

Check the DIA with the parameters of the hub--

⚠️ Attention: On Kodiaq with all-wheel drive (4×4) discs with c cannot be installed ET less 40 This will lead to an increased load on the hub bearings and a reduction in their resource.

Tire selection: what a Kodiaq 2018 owner needs to know

Tires for ŠKODA Kodiaq They are not only selected by size, but also by load index and speed. For example, for the version with engine 2.0 TDI (190 hp) minimum load index - 99 (775 kg per wheel) and the speed index is H (up to 210 km/h).

Seasonal recommendations:

• ❄️ Winter tires: for R17 will do 215/65 R17 with spikes or Velcro (e.g., Nokian Hakkapeliitta R3 or Michelin X-Ice North).
• ☀️ Summer tires: for R19 optimal size 235/50 R19 (for example, Continental ContiSportContact 5 or Pirelli P Zero).
• 🌧️ All-season tires: suitable for temperate climates (e.g., Goodyear Vector 4Seasons Gen-3 in size 235/55 R18).

Selection tips:

• 🔄 Maintain the outer diameter of the wheel. For example, when moving from 215/65 R17 on 235/50 R19 The outer diameter remains ~695 mm.
• 📉 Avoid too wide tires. (for example, 275/40 R20) will increase fuel consumption and steering load.
• 🔧 Check your pressure every 2 weeks: for Kodiaq recommended 2.4–2.6 bar (Depends on download).

Wheel tuning: do's and don'ts

Many owners Kodiaq They want to improve the appearance of the car due to the wheels. However, not all modifications are safe. Let’s look at the permissible and prohibited options.

Allowed changes:

• 🎨 Painting wheels. You can use a powder coating or vinyl stickers (for example, under the carbon look).
• ↗️ Increase in diameter up to R20. The tyres must be low profile (e.g., low profile). 255/40 R20).
• 🔄 Installing spacers (up to 15 mm) to increase the track, but only while maintaining the overall track ET.

Prohibited or dangerous modifications:

• ❌ Installing disks with PCD 5×100 or 5×114.3. Even with transition rings, this will lead to beating and the risk of wheels spinning.
• ❌ Using tires with a lower load index 95. For Kodiaq Weight of ~1.8 tons is critical.
• ❌ Decrease ET more than 10 mm. This will increase the load on the hub bearings and may cause them to fail.

Popular styles of tuning for Kodiaq:

• 🖤 Black wheels (for example, OZ Racing Ultraleggera or BBS CH-R).
• 🔵 Two-tone wheels (silver + graphite).
• 💎 Forged wheels (Light and durable, but expensive – from 80,000 rubles per set).

What happens if you install disks with the wrong ET?

Incorrect departure (ET) shifts the center of gravity of the wheel, which leads to:

Accelerated wear of hub bearings (replacement will cost 15,000-25,000 rubles per pair).

- Increased load on shock absorbers and suspension levers.

Deterioration of handling at high speed (the car can "scour").

- Possible slack of the disc behind the brake caliper or arch at full load.

Where to buy wheels and tires for Kodiaq 2018: proven options

When purchasing wheels for ŠKODA Kodiaq It is important to choose a reliable seller. Here are the proven options:

Official dealers and services:

• 🏢 ŠKODA Center. Guarantee on wheels and tires, but prices are 15-20% higher than the market.
• 🔧 Service centers Volkswagen Group. You can order original discs (articles, for example, 5Q0601025B for R18).

Online stores:

• 🌍 KolesaDarom or Shina.ru. A wide range, often there are promotions (for example, a 10% discount when buying a set of tires + wheels).
• 📦 AliExpress or JD.ru. Cheaper by 30-40%, but the risk of running into a fake (check reviews and seller rating).

Used market:

• 🔄 Avito or Drom.ru. You can find original discs from Kodiaq or Audi Q5 at a price 2-3 times lower than the new. Before buying, be sure to check the disc for the beat and corrosion of the hub hole!
• 🔍 Groups in VKontakte or Facebook. For example, Skoda Kodiak Russia – they often sell discs after seasonal replacement.

⚠️ Attention: When purchasing used disks with AliExpress or Avito require photo:

- The mating plane (must be smooth, without scratches).

- Central hole (no rust or deformation).

- Markings (must match your parameters).

Common mistakes when choosing wheels and how to avoid them

Even experienced car owners sometimes make mistakes when choosing wheels for Kodiaq. Let's look at the top 5 mistakes and ways to prevent them:

1. Ignoring tire load index.

   For example, by installing tires with the index 91 (615 kg) instead 99 (775 kg), you risk “disassembling” them when the car is fully loaded (weight Kodiaq with passengers and luggage can exceed 2.5 tons).

2. Purchasing discs without accounting DIA.

   If the center hole of the disk is larger 57.1 mm, centering rings will be required. Without them, the wheel will be mounted off-center, which will lead to runout.

3. Installation of tires of varying degrees of wear.

   The difference in tread is more 2–3 mm between the axles worsens handling, especially on wet roads.

4. Savings on balancing.

   Unbalanced wheels at speed 120+ km/h create vibration that destroys bearings and shock absorbers.

5. Use of "universal" spacers.

   Spacers must be certified for your model and are made of aluminum (not steel or plastic).

How to avoid mistakes:

• 📋 Make a checklist before purchasing (see widget above).
• 🔧 Consult with specialists. For example, in a store Shina.ru You can check compatibility by VIN code for free.
• 📊 Use calculators. For example, TireCalculator will help you compare tire sizes.

💡

Even if the discs physically fit onto the hub, this does not guarantee their compatibility. Always check PCD, ET and DIA against documentation or specialized services.

FAQ: Answers to frequently asked questions about the Kodiaq 2018 bolt pattern

Is it possible to install Audi Q5 wheels on the ŠKODA Kodiaq 2018?

Yes, but with reservations. Audi Q5 (2017–2023) has the same bolt pattern parameters: PCD 5×112, ET45–50, DIA 57.1. However:

• Discs from Q5 with ET52 (for example, for version SQ5) may not be suitable for basic Kodiaq due to the risk of hitting the arches.
• Disc width Q5 often more (8.5J–9J), which will require the selection of wider tires.

Please check compatibility before purchasing WillTheyFit.

What wheels are suitable for Kodiaq RS 2018?

Kodiaq RS has a sports suspension and enlarged wheel arches, so the standard parameters are:

• Size: 8.5J×20 or 9J×20.
• Tires: 255/40 R20 or 275/35 R20.
• ET: 52–55 (depending on the width of the disk).

For this version don't fit wheels from regular ones Kodiaq with ET45 — they will be too “recessed” in the arches.

What is the maximum size of disks that can be installed on Kodiaq 2018?

Technically on Kodiaq 2018 drives can be installed up to R21, but:

• For R20 tires will be required 255/40 R20 or 275/35 R20 (check the gaps with the arches!).
• For R21 the arches need modification (cutting or installing spacers), which is illegal in Russia.
• Diameter increase more than R19 worsens comfort (suspension stiffness increases by 15–20%).

The optimal balance between appearance and practicality - R19.

Do I need to change bolts when changing discs?

Yes, if:

• You are installing disks with recesses for bolts (long tapered bolts will be required).
• Old bolts have thread damage or corrosion.
• You are switching to disks with other type of fastening (for example, from bolts to nuts).

Standard bolts for Kodiaq 2018: M14×1.5, length 27 mm, cone 60°.

How often should you check the bolt pattern and condition of the discs?

Recommended schedule:

• 🔧 Every 10,000 km: checking tire balance and pressure.
• 🔍 Every 20,000 km: inspect the discs for cracks, hub hole corrosion and bolt wear.
• 📏 For seasonal replacement: check PCD and ET (especially if the disks are used).

Signs of bolt pattern problems:

• Steering wheel vibration at speed 90–110 km/h.
• Uneven tire wear (especially on the inner edge).
• Extraneous sounds (creaks or knocks) when turning.