Replacing wipers with Škoda Kodiaq 2020 is a challenge that every owner faces sooner or later. Not only the comfort of driving in rain or snow, but also safety depends on the quality of the wipers: a poorly cleaning device can cause an accident due to limited visibility. However, before buying new wipers, it is important to know exactly their sizes - an error of even 1-2 centimeters will lead to the fact that the blades will not fit well, leave streaks or scratch the glass.

In this article we will look in detail official wiper sizes for Kodiaq 2020 model year, including front and rear windshield wipers, the nuances of selection depending on the configuration, and we will also give practical advice on choosing a manufacturer and replacing them yourself. We will pay special attention to common mistakes that car owners make when purchasing, and we will explain why universal brushes are not always suitable for this crossover.

Official wiper sizes for Škoda Kodiaq 2020

The manufacturer clearly regulates the sizes of windshield wipers for Škoda Kodiaq second generation (including restyled versions of 2020). These parameters are the same for all trim levels - Ambition, Style, Sportline and L&K, - since the geometry of the windshield and rear glass does not change. The only exceptions are cars with the option panoramic roof, but even in this case, the sizes of the wipers remain standard.

It is important to consider that Kodiaq equipped frameless wipers from the factory, but when replacing, you can also install frame brushes - the main thing is that their length corresponds to the original parameters. Below is a table with exact dimensions:

Wiper type Size (length), cm Notes
Front (driver's side) 65 Longer brush, fastening type Hook (U-shaped)
Front (passenger side) 45 Shorter than the driver's by 20 cm, similar mount
Rear 35 Installed on all versions, including 7-seater

Please note: wipers with a length of 60 cm for the driver's side are often found on the market - this is the size for the previous generation Kodiaq (until 2019). Installing such blades on the 2020 model will result in incomplete cleaning of the glass in the driver's viewing area.

📊 How often do you change the wipers on your car?
  • Every season
  • Once a year
  • When do they stop cleaning?
  • Never changed

Why is it important to follow the original dimensions?

Many car owners mistakenly believe that they can install wipers “with a reserve” - for example, take a 70 cm brush instead of 65 cm in order to increase the cleaning area. However, this is fraught with several problems:

  • 🔹 Glass damage: Wipers that are too long can catch on plastic moldings or the edge of the glass, leaving micro-scratches.
  • 🔹 Uneven wear: the brush will not adhere to the glass along its entire length, which is why the central part will quickly be erased, while the edges will remain new.
  • 🔹 Noise and vibration: At high speeds, long wipers begin to “bounce”, creating an annoying sound and streaks.
  • 🔹 Mechanism load: The windshield wiper motor is not designed for increased resistance, which can lead to premature failure.

On the other hand, blades that are too short will not be able to clean the outer zones of the windshield, which is especially critical when driving towards the sun or in heavy rain. Therefore Deviation from the original dimensions is permissible no more than ±1 cm.

💡

If you buy non-original wipers, check not only the length, but also the type of fastening. On Kodiaq 2020 standard used Hook 9x3 or Hook 9x4 - this information is indicated on the back of the factory brushes.

How to determine the size of wipers yourself

If you are unsure of the dimensions or suspect that the previous owner installed non-original brushes, you can measure them yourself. To do this:

  1. Remove the wiper from the mount by pressing the lock (usually located at the bottom of the holder).
  2. Place the brush on a flat surface and measure its length from edge to edge using a tape measure or ruler.
  3. Round the result to the nearest standard size (e.g. 64.5 cm → 65 cm).

You can also determine the size by the markings on the brush itself. Original wipers Škoda have a designation in the format 6K0 955 425 A (for driver's side) and 6K0 955 426 A (for passenger). The last characters may vary depending on the supplier, but the length always follows the table above.

What to do if the sizes do not match?

If after measuring it turns out that the brushes are shorter or longer than the original ones, check:

- Are wipers from another model installed on the car (for example, from Volkswagen Tiguanwith whom Kodiaq divides the platform).

- Has there been any interference with the windshield wiper mechanism (for example, replacing the trapezoid or levers).

- Are the brushes “universal” with adjustable length (these are often sold in accessory stores).

The best manufacturers of wipers for Škoda Kodiaq

The market offers a huge selection of windshield wiper blades - from budget to premium. For Kodiaq In 2020, experts recommend paying attention to the following brands:

  • 🏆 Bosch: series Aerotwin or Twin — optimal combination of price and quality, frameless design with graphite coating.
  • 💎 HELLA: model Hella EcoWind - durable brushes with an asymmetrical profile for a better fit.
  • 🔧 Valeo: Silencio X-TRM — premium segment, suitable for extreme conditions (severe frost, freezing rain).
  • 💰 Denso: Denso Hybrid — hybrid technology (frame + frameless elements), recommended for regions with frequent temperature changes.

Among the original spare parts it is worth highlighting the brushes Škoda with articles 6K0955425 (driver's side) and 6K0955426 (passenger). They are supplied in original packaging and are guaranteed to fit properly. However, their price is 2-3 times higher than their analogues, so many owners prefer alternative brands.

⚠️ Attention: Don't buy wipers labeled "Universal" or "Multi-fit" without checking first. Even if the length is the same, the mount may not fit the lever Kodiaq. Always check the type of fastener (e.g. Hook, Bayonet, Side Pin).

Step-by-step instructions for replacing wipers

Replace the windshield wiper blades with Škoda Kodiaq you can do it yourself in 5–10 minutes. All you need are new wipers and a flathead screwdriver (in case the retainer gets stuck). Follow the algorithm:

☑️ Preparing to replace wipers

Done: 0 / 4

Step 1. Raise the wiper arm to the vertical position. Be careful - it is fixed with a spring, and if you release it suddenly, you can damage the glass.

Step 2. Press the latch (usually located at the bottom of the holder) and pull the brush down to remove it from the hook. If the latch does not budge, carefully pry it off with a screwdriver.

Step 3. Take the new brush and align its mount with the hook of the lever. Press until you hear a click - this means that the latch is in place.

Step 4. Lower the lever back onto the glass. Repeat the procedure for the second brush.

For the rear wiper, the process is similar, but the lever there is shorter, so you need to remove and install the blade more carefully so as not to bend the mechanism.

💡

After replacing the wipers, be sure to check their operation at all speeds. If the brushes leave streaks or “bounce”, it means they are installed incorrectly or are not the right size.

Common mistakes when choosing and replacing wipers

Even experienced car owners sometimes make mistakes that lead to premature wear of the blades or damage to the glass. Here are the most common of them:

  • 🚫 Ignoring the season: summer wipers in winter become dull in the cold and do not clear snow well, while winter wipers in summer can leave streaks due to soft rubber.
  • 🚫 Buying by eye: Selecting brushes without first measuring or checking the part numbers often leads to size mismatches.
  • 🚫 Saving on quality: cheap wipers made of low-quality rubber wear out in 1–2 months and scratch the glass.
  • 🚫 Improper storage: If you leave the blades in direct sunlight (for example, on a windshield in summer), the rubber will crack.

Another typical problem is mixing up the sides. The windshield wipers for the driver and passenger sides are not interchangeable: they have different lengths and sometimes different mountings. Installing a long brush on the passenger side will cause it to touch the body pillar.

⚠️ Attention: If after replacement the wipers begin to “squeak” or leave streaks, do not rush to blame the manufacturer. Most often this is due to glass contamination (for example, wax or silicone grease residue). Wash the glass with a special cleaner (for example, SONAX Glass Cleaner) before the first trip.
Is it possible to install frame wipers instead of frameless ones?

Yes, but only if their length exactly matches the original dimensions (65 cm and 45 cm). Frame brushes cope worse with icy glass, but last longer in very dusty conditions (for example, on dirt roads).

How often do you need to change the windshield wipers on your Kodiaq?

Recommended interval - every 6–12 months or at the first signs of wear (smears, creaking, uneven cleaning). In regions with frequent temperature changes or high salinity of roads, brushes wear out faster.

Will windshield wipers fit on Volkswagen Tiguan?

Partially. Kodiaq and Tiguan (2nd generation) share the platform MQB, but the sizes of the wipers are different: Tiguan The driver's brush is 5 cm shorter (60 cm instead of 65 cm). Installing brushes from Tiguan on Kodiaq will lead to incomplete cleaning of the glass.

What to do if the new wiper leaves streaks?

The reasons may be different:

  • 🔸 Factory defective rubber (check the brush for defects).
  • 🔸 Incompatibility with the shape of the glass (for example, too hard rubber).
  • 🔸 The glass is dirty (clean it with silicone-free glass cleaner).

If the problem persists, try a different brand or return the brushes under warranty.

Do I need to lubricate the wiper mechanism?

No, windshield wiper mechanism Kodiaq does not require lubrication during operation. If the wipers begin to move jerkily, the reason lies in the wear of the trapezoid or electric motor - in this case, diagnostics are needed at the service center.