Replacing the windshield with ŠKODA Rapid - a task that every owner faces sooner or later. From a crack after a stone hit to complete destruction during an accident, the reasons may be different, but the key question is always the same: which exact glass size does it fit your model? In this article we will analyze not only the standard dimensions, but also the nuances that influence the choice - from the year of manufacture to the body type (liftback or hatchback).

Many car owners mistakenly believe that all glass is for Rapid are the same, but in practice even minor differences in curvature, thickness or fastenings may render the glass unsuitable for installation. We analyzed manufacturer data, spare parts catalogs and reviews from technicians to provide up-to-date information. We will pay special attention to original articles and their analogues - this will help you save money without losing quality.

Official ŠKODA Rapid windshield dimensions by generation

Model ŠKODA Rapid was produced in two generations (2012–2020 and 2021–present), and although the glass visually appears identical, their geometry has key differences. For the first generation (NH1) standard glass size is 1430×1050 mm (width × height), but taking into account the bend radius and the wiper mounting area, actual parameters may vary.

Second generation (NQ, from 2021) received glass with an increased viewing area - 1450×1070 mm. This is due to a change in body design and displacement of the pillars. Important: even within one generation of glass for versions with option packages (for example, with rain sensors or heating) may have additional holes or coating, which requires separate selection.

  • 🔹 2012–2020 (NH1): 1430×1050 mm, original article number - 5E1 845 011 A (without sensors) or 5E1 845 011 B (with rain sensor).
  • 🔹 2021–2023 (NQ): 1450×1070 mm, article number - 5E5 845 011 (universal for all trim levels).
  • 🔹 Hatchback Spaceback: uses the same glass as the liftback, but with a different seal mount.
  • 🔹 Facelift 2017: there were no changes in glass sizes, but glasses with acoustic film for better sound insulation.

When purchasing glass, be sure to check not only the dimensions, but also marking by VIN code. For example, for machines with a system Front Assist (pedestrian recognition) requires glass with a special area for the camera, which is located behind the rear view mirror.

📊 What glass do you have installed?
  • Original (ŠKODA)
  • Analog (Pilkington, Saint-Gobain)
  • Chinese unoriginal
  • I don't know

How to measure your windshield yourself: step-by-step instructions

If you are in doubt about the dimensions or plan to buy glass without reference to the VIN code, you can take measurements yourself. To do this you will need a tape measure, a marker and an assistant. The main rule: measure along the outer edges of the seal, and not along the visible part of the glass.

Algorithm of actions:

  1. Remove the rubber seal around the perimeter of the glass (carefully so as not to damage it).
  2. Measure the width from the left to the right edge of the opening (usually 1430–1450 mm).
  3. Measure the height from the bottom edge to the top edge (1050-1070 mm depending on the generation).
  4. Check the bending radius - to do this, apply a ruler to the center of the glass and measure the maximum distance to the surface (should be 10–12 mm).

Generation and year of manufacture of the car

Availability of sensors (rain, light, camera)

Body type (liftback/hatchback)

Markings on old glass (if any)

Heating system compatibility (if equipped)-->

Please note: if there is any on the glass spraying for antenna or heating, it cannot be replaced with a regular one - this will lead to system inoperability. Also check if there is any hole for mounting the rear view mirror (in some analogues it is absent).

⚠️ Attention: When taking measurements, do not press on the glass - even microcracks can lead to complete destruction during dismantling. If the glass is already damaged, use a cardboard template and place it on the inside.

Original vs analogs: what to choose for ŠKODA Rapid

Original glass from ŠKODA (production Saint-Gobain Sekurit or Pilkington) guarantee a perfect fit and compatibility with electronics, but their price can reach 25–30 thousand rubles. Analogs from trusted brands (for example, XYG, BENSON or NordGlass) will cost 1.5–2 times less, but there are risks here:

  • 🔍 Cutting quality: Cheap glass may have uneven edges, making installation difficult.
  • 🌡️ Review Distortion: non-original glass sometimes gives a “lens” effect on the periphery.
  • 🔌 Problems with sensors: if the glass is not certified for Front Assist, the camera may not work properly.

Among analogues, glass has the best reviews Pilkington (article PGW 555555 for NH1) and Saint-Gobain (SG 845011). They undergo the same tests as the originals, but cost 30-40% less. The main thing is to buy from authorized dealers to avoid fakes.

Manufacturer Article Price (RUB) Features
ŠKODA (original) 5E1 845 011 B 22 000–28 000 With rain sensor, acoustic film
Pilkington PGW 555555 14 000–18 000 Complete analogue of the original, certified
XYG XYG-RAPID-2021 9 000–12 000 Budget option, possible distortions
BENSON BEN-845011 11 000–15 000 Good quality, but without acoustic film

A critical nuance: windows for Rapid with the Lane Assist system (lane control) have a special coating in the camera area. Installing uncertified glass will lead to system failure!

Windshield replacement: cost and installation details

The average cost of glass replacement at a service level is from 5,000 to 12,000 rubles (excluding the price of the glass itself). The price is affected by:

  • 🔧 Glue type: original SikaTack or an analogue (for example, 3M PU590).
  • ⏱️ Drying time: Some services use ultraviolet lamps to speed up the process.
  • 🚗 Additional work: removing the mirror, sensors, camera calibration (if any) Front Assist).

Self-replacement is possible, but requires experience. Main stages:

  1. Removing the seal and old glass (use glass cutting wire or a special knife).
  2. Cleaning the opening from glue and rust residues (be sure to treat anticorrosive).
  3. Applying new glue (layer thickness - 8–10 mm) and installing glass with an assistant.
  4. Fixing the glass with tape for 1–2 hours, complete polymerization of the glue - 24 hours.
⚠️ Attention: If after replacement the indicator lights up Front Assist on the dashboard, camera calibration is required. Without it, the emergency braking system will not work! Calibration costs 2,000–4,000 rubles and takes 30–60 minutes.
💡

Before replacing the glass, remove the bumper - this will give access to the lower edge of the opening and allow you to thoroughly clean it of old glue. Many services do not do this, which leads to leaks.

Common problems after glass replacement and how to avoid them

Even after professional replacement, owners Rapid may run into trouble. Here are the most common:

  • 💧 Water leaks: occur due to poor cleaning of the opening or incorrect application of glue. Check the seal a week after replacement.
  • 🔊 Whistle at speed: indicates a loose fit of the glass. The solution is to reseal or replace the seal.
  • 🚨 Electronics errors: if it catches fire Check Front Assist, camera recalibration is required (done via ODIS or VCDS).
  • 🔄 Review Distortion: typical for cheap glass with irregular curvature. The only solution is replacement.

To minimize risks, choose services with a work guarantee (at least 1 year) and require the use of original glue. Also, after replacing, avoid washing the car for 48 hours - this is critical for the sealant to polymerize.

What to do if the glass cracks immediately after replacement?

If a crack appears within 24 hours, the fault lies with the service - most likely, the drying process was disrupted or low-quality glue was used. Request a free replacement under warranty. If the crack appeared later, check:

1. Were there any mechanical impacts (stones, impacts).

2. Has the glass overheated (for example, when washing with hot water).

3. Are there any defects in the area where the wipers are attached (cracks often start from there).

Where to buy a windshield for ŠKODA Rapid: trusted suppliers

It is better to buy glass from official dealers or specialized stores. Avoid markets and unverified Internet sites - there is a high risk of running into a fake. Here are reliable options:

  • 🏢 Official ŠKODA dealers: guarantee of original quality, but high price.
  • 🌍 Online stores: Exist.ru, Autodoc.ru, Emmegi.ru — there is a filter by VIN code.
  • 🔧 Service centers: Many offer custom-made glass with turnkey installation.
  • 📦 Parts auctions: for example, eBay or Aliexpress, but there is a high risk of getting defective.

When purchasing, be sure to ask the seller:

  1. Photo of glass with article number and markings.
  2. Warranty card (minimum 6 months).
  3. Certificate of conformity (for glass with sensors).

Average prices on the market (2026):

  • Original: 20,000–30,000 rub.
  • Pilkington/Saint-Gobain: RUB 12,000–18,000.
  • Chinese analogues: 6,000–10,000 rubles. (risk of defects - up to 20%).
💡

When buying glass at auctions, pay attention to the country of origin. Glass from Turkey or India often has geometry defects, while European analogues (even non-original ones) undergo strict control.

FAQ: Answers to frequently asked questions about the ŠKODA Rapid windshield

Is it possible to install glass from another car on the Rapid?

Theoretically, glass from VW Polo Sedan (the first generation Rapid is built on its platform), but only for models 2012–2020. However, differences in the wiper mounts and the shape of the bottom edge may require modifications. There are no analogues for the second generation (2021+).

How to check whether the original glass is installed?

Original glasses have:

  • Logo ŠKODA or VW Group in the bottom corner.
  • Marking with the article number (for example, 5E1 845 011).
  • Manufacturer's holographic sticker (Saint-Gobain or Pilkington).

Analogues usually only have a sticker with the brand name without the automaker’s logo.

How long does it take to replace glass?

In the service, the process takes 2–3 hours, but complete polymerization of the glue occurs in 24 hours. At this time you cannot:

  • Wash the car with high pressure.
  • Drive off-road or at high speed.
  • Close doors forcefully (this creates vibrations).
Is it possible to drive with a cracked glass?

If there is a crack:

  • 🚫 Blocks the driver's view — driving is prohibited (fine 500 rubles under Article 12.5 of the Administrative Code).
  • ⚠️ Located on the edge — you can drive, but the glass may crack completely due to vibration.
  • ✅ No more than 10 cm and not in the wiper area — temporary operation is allowed.

Remember: even a small crack reduces the strength of glass by 70%!

What should I do if noise appears after replacement?

Noise at speeds above 90 km/h indicates:

  • The glass does not fit tightly (the fastenings need to be tightened).
  • Defective rubber seal (replacement required).
  • Distortion of glass geometry (if non-original was used).

Solution: contact the service for diagnostics. Additional sealing with silicone often helps.