Owning a modern crossover Skoda Kodiaq It requires not only timely maintenance, but also the correct configuration of onboard systems. After a scheduled replacement of engine oil, the indicator on the dashboard continues to require attention, which can irritate the owner. This meter counts the mileage or time to the next scheduled maintenance, and it must be reset manually to start a new count.
Procedure for resetting the interval of oil change in the model Kodiaq It has its own features, depending on the year of release and the version of the multimedia system software. Ignoring this step will cause the onboard computer to miscalculate the residual life of lubricants, which is critical for the long life of the engine.
Preparation for the counter-zero procedure
Before you start manipulating the car menu, make sure that all the work on changing the oil and filters has already been done. It is useless to reset the interval if maintenance is not carried out, as this will violate the logic of the engine monitoring system.
You will need access to the control buttons on the steering wheel or the Infotainment touch screen, depending on your configuration. Skoda Kodiaq. It is important that the engine is silenced, but the ignition is in the position ON (ignition is on, the engine is not working), or the machine must be completely switched off before the process begins.
Make sure you are in a calm environment, as interrupting the reset process may require you to re-start the procedure from the start. Some firmware versions require actions to be performed in a strictly defined sequence, and there is no need to rush here.
β οΈ Attention! If you reset the interval without actually changing the oil, you risk running the engine with a spent lubrication life, which will lead to accelerated wear of the knots and possible overhaul.
Reset via the Infotainment multimedia menu
Most of the modern versions Skoda KodiaqIn the case of second-generation screens, the procedure is performed via a touchscreen display. This method is considered the most intuitive and does not require complex combinations of buttons on the steering wheel or instrument panel.
Go to the main menu and select the section. Settings (Settings) Next, you need to find a point. Vehicle condition or Service (Car Status/Service). Inside this menu, the current oil change status and service intervals will be displayed.
- Click on the icon Service It's in the top menu of the screen.
- Select an item Oil change interval in the list of parameters.
- Click the button Reset (Reset) and confirm the action.
The system may request confirmation through a pop-up window. Click Yes or ConfirmThe indicator on the dashboard will instantly update, showing a new mileage to the next scheduled maintenance. If the menu is not in a standard place, check the tabs with the wrench icon.
βοΈ Preparing to reset via screen
Alternative method through instrument combination
For owners Skoda Kodiaq In the early years of release or basic configurations without a large screen, there is a classic method of resetting using buttons on the dashboard. This method has been tested for years and works on most VAG vehicles.
You need to find two buttons on the end of the instrument cluster, usually this is the 0.0/SET and the diurnal mileage switch button. Turn on the ignition, but don't start the engine, then press and hold the button. 0.0/SET within a few seconds.
After the message about the reset on the display of the onboard computer, without releasing the first button, press the switching button of the clock or daily mileage. On the screen will appear confirmation of the reset interval, which must be confirmed by repeated pressing.
If you have a digital instrument panel Active ViewThe process can be different and performed via the menu on the steering wheel. Use the control arrows to navigate the section Condition and select the service interval reset option.
- Click the button 0.0 And hold it until the menu comes along.
- Use the buttons Up/Down to select a service point.
- Confirm the reset with the button OK on the steering wheel or dashboard.
- Through the Infotainment screen
- Through the buttons on the panel
- Through the menu on the steering wheel
- Haven't tried it yet
Using diagnostic equipment
If standard methods fail or the indicator lights up again after reset, a program reset via a diagnostic scanner may be required. This is true for cases when the system detects errors in the operation of sensors or when changing oil in the service.
Specialists use dealer equipment ODIS or professional scanners, such as VCDS or Carista. The connection is made through the OBDII port, usually located under the steering column.
β οΈ Attention! Unprofessional use of diagnostic scanners can cause malfunctions in electronic control units, requiring complex and expensive software recovery.
In the scanner, you need to select a module 17 - Instruments (Dashboard) or 09 - Central Electrics. In the adaptation menu, find the channel responsible for service intervals and set the reset value. This is the most reliable way for complex cases.
Reset features for 2.0 TSI and TDI engines
Models Skoda Kodiaq with diesel engines 2.0 TDI and gasoline 2.0 TSI There may be different algorithms for calculating intervals. Diesel versions often take into account not only the mileage, but also the number of regenerations of the particulate filter, which affects the frequency of oil change.
It is important for TSI engines to observe intervals, as turbocharging creates high temperatures that require fresh lubrication. Owners of these versions should be especially attentive to system messages that may be duplicated on the multimedia screen.
In some cases, the system may offer two types of service: fixed interval and flexible (LongLife). When resetting, make sure that the correct mode is chosen that corresponds to the operating conditions of your vehicle in your area.
What is LongLife mode?
LongLife mode allows you to increase the interval of oil change to 30,000 km or 2 years, but requires the use of a specific oil with the VW 508 00/509 00 standard and a more complex lubrication quality control system.
Typical errors and their elimination
Often, owners are faced with the fact that after resetting the indicator does not disappear. This may be due to an incorrect button-click sequence or an outdated version of the software. Try to shut off the battery for 10-15 minutes to reset temporary system errors.
Another common problem is resetting the time interval, but not the mileage. Make sure that in the settings you choose to reset the very parameter that is active. There can be two separate items in the menu: "Run interval" and "Time interval".
If the indicator continues to burn red, it is possible that the oil level sensor or oil quality sensor is faulty. In this case, a diagnosis for SRT is required, since a software reset will not solve the hardware problem.
| Engine type | Recommended interval (LongLife) | Recommended interval (Fixed) | Oil specification |
|---|---|---|---|
| 1.4 TSI | 30,000 km / 2 years | 15,000 km / 1 year | VW 508 00 |
| 2.0 TSI | 30,000 km / 2 years | 15,000 km / 1 year | VW 508 00 |
| 2.0 TDI | 30,000 km / 2 years | 15,000 km / 1 year | VW 507 00 |
| 2.0 TSI 4x4 | 20,000 km / 1 year | 15,000 km / 1 year | VW 504 00 |
A proper understanding of the specifics of your engine will help to avoid errors when choosing a maintenance mode. For heavy driving conditions, it is always best to choose a fixed interval, even if the car supports LongLife.
Write down the date of the oil change and the mileage in a notebook or phone notes - this will help you control the real wear of the engine, regardless of the readings of the onboard computer.
Important nuances of service Skoda Kodiaq
In addition to the resetting of the interval, owners Skoda Kodiaq It is worth remembering to regularly check the level of oil. The electronic probe may have an error, and visual control through the probe (if any) or through the menu. Oil level It is required every 1000 km after replacement.
Use only oils that meet the specifications of the company Volkswagen. The use of inappropriate lubricants can lead to clogging of oil channels, failure of the phase rotator system and failure of the turbocharger.
Regular maintenance is the key to maintaining a high residual value of the car in the future sale. A complete service history with correctly reset intervals increases the confidence of customers to the technical condition of the crossover.
β οΈ Attention! Resetting the service interval does not eliminate the need for diagnostics of the suspension, brake system and other components of the car at each scheduled visit to the service.
FAQ: Frequently asked questions
What if the reset does not occur the first time?
Try repeating the procedure, strictly observing the time intervals between button presses. If it doesnβt work, turn off the battery for 15 minutes to reset the controller errors and try again.
Is it possible to reset the interval without changing the oil?
Technically, this is possible, but it is not recommended. This will break the logic of the system and can lead to engine failure due to the use of spent oil.
Where is the reset button on the new Kodiaq?
On newer models, the reset button is often physically missing. The procedure is performed via the Infotainment touch screen in the car settings section or through the menu on the steering wheel.
How long does the reset procedure take?
The entire process takes from 30 seconds to 2 minutes, depending on the firmware version and the method chosen (via screen or buttons).
Regular and correct maintenance of the engine lubrication system is the basis of the durability of your Skoda Kodiaq and its reliability for the long term.