Crossover owners Skoda Kodiaq model year 2020 are often faced with the need to reset the maintenance counter after changing the oil and filters. The situation is complicated by the fact that depending on the version of the multimedia system (MIB2 or MIB3) and the configuration, the algorithm of actions may differ. If you simply replace the consumables, but do not reset the interval, the on-board computer will continue to require a service visit, which irritates the driver and spoils the operation statistics.
The return to zero procedure can be performed independently without contacting a dealership, but requires strict adherence to the instructions. Errors in key sequences or menu selections may cause the system to request service again or, in rare cases, disable some diagnostic functions. We will analyze all available methods, from using the standard menu to using external equipment.
Preparing the vehicle for the reset procedure
Before you begin any manipulations with the car's electronics, you must make sure that you are in a safe environment. The engine must be turned off, but the ignition is turned on Ignition On (all the lights on the dashboard are on, but the engine does not work). This is critical to ensure that the engine control module and on-board computer have sufficient power to write new parameters.
If you plan to use the multimedia system menu method, make sure the battery is 100% charged. The process of updating service data in a block Service Interval may take several minutes, and sudden power failure will cause software errors. It is also recommended to close all doors and not press the brake pedal during the procedure.
It is important to check the current status of the intervals. Drivers often forget that the Skoda Kodiaq has two types of service: fixed and flexible (LongLife). To reset correctly, you need to understand which mode is currently activated. This affects the choice of the correct action algorithm.
β οΈ Caution: Do not attempt to reset while the engine is running. This can lead to data conflicts between control units and cause false alarms.
Reset via MIB3 multimedia system
Most versions Skoda Kodiaq 2020 models are equipped with a modern MIB3 system, which has an intuitive interface, but hides service settings deep in the menu. First you need to enter the main menu and select the section Car (Car), where all the settings relating to the technical part of the car are located.
Next you should go to the subsection Service (Service) Here you will see information about the mileage to the next scheduled maintenance, the timing of the oil change and the condition of the liquids. Depending on the firmware version, the reset button may be called Reset or Confirm Service. Click on it and confirm the action by holding your finger on the screen for two seconds.
If the system requests confirmation, select the option. Yes or OK. After that, the screen may flash, and after a few seconds you will see updated values: the mileage until the next service should return to the standard 15,000 km or 1 year (depending on the settings). This is the easiest and safest way for most users.
- β
Go to menu
CarβService - β
Select an item
Service Interval - β
Click
Resetand confirm the action
In some cases, the system may request an access code or PIN if the security function is activated. Standard trim levels donβt usually require a code, but if it does appear, try standard factory values or contact the dealer for help unlocking.
- MIB2 (old version)
- MIB3 (new version)
- No multimedia (basic equipment)
- I don't know
Alternative method: reset using the buttons on the dashboard
For those with no media screen reacting or missing, there is a classic method of resetting through the buttons on the dashboard. This method is suitable for all versions. Skoda Kodiaq, regardless of year of manufacture. You will need two buttons: OK (or Reset) on the steering wheel and the time button on the dashboard.
Turn on the ignition without starting the engine. Press and hold the button OK on the steering wheel until the settings menu appears on the display. Then, without letting go of the button. OKPress and hold the time setting button (usually to the right of the speedometer). Hold both buttons at the same time for 5-7 seconds.
A request will appear on the screen. Reset service? (Discharge service?) Release the buttons and press again. OK for confirmation. If the procedure is done correctly, a message will appear. Service reset. This method is especially relevant if you have replaced the oil yourself and do not want to use complex software packages.
β οΈ Note: If you use the button method, make sure you do not press the brake pedal. Turning on the engine during reset may interrupt the process and cause an error in the control unit.
βοΈ Preparing to reset with buttons
Use of OBD2 diagnostic scanners
If standard methods do not work or the system gives an error, the best solution is to use professional diagnostic equipment. OBD2 scanners that support VAG (Volkswagen Group) protocols allow you to reset the interval through a computer. This will require a laptop with installed software (such as VCDS, OBDeleven or Carista) and a cable to connect.
Connect the scanner to the OBD2 connector, which is usually located under the steering column. Start the program and select the car Skoda Kodiaq. Go to section Service or Instrument Cluster (Dashboard) and select the function Reset Service Interval. The program will automatically send a command to reset the meters.
This method allows not only to zero the interval, but also to check the general condition of the car, to identify hidden errors and see the real mileage. For users who often service the machine on their own, buying a scanner like OBDeleven is a great investment.
- β Connect the scanner to the OBD2 connector
- β Run diagnostic software on a laptop or smartphone
- β
Select function
Reset Servicein the menu - β Wait for confirmation of successful reset
Which scanner is better to choose?
For simple tasks, OBDeleven or Carista is suitable. For deep diagnostics and function coding, a VCDS (VAG-COM) or ODIS dealer scanner is recommended.
Features of flexible service LongLife
It is important to understand the difference between fixed and flexible service intervals. In cars Skoda Kodiaq In 2020, LongLife is often activated, which calculates the mileage to the next maintenance based on driving style, fuel quality and operating conditions. Resetting such an interval requires special attention, since simply zeroing the mileage is not enough.
If you want to switch to a fixed interval (e.g. every 15,000 km), you can do this through a car menu or diagnostic scanner. The fixed interval is more predictable and is often recommended for machines operating in difficult conditions (frequent traffic jams, short trips, extreme temperatures).
When resetting LongLife, the system may suggest choosing the type of service: Oil Service (oil change) or Inspection (full maintenance) Choose the option that corresponds to your actions. If you only changed the oil, choose the Oil ServiceThe system will correctly calculate the next interval.
β οΈ Warning: Incorrect choice of service type (oil instead of inspection) can cause the system to require a visit to the service ahead of time, even if the mileage is small.
Table of types of service intervals
For clarity, we will compare the different types of service that may be active in your car. Understanding these differences will help you choose the right reset method and avoid confusion in the future.
| Type of service | Mileage until next service | Time to the next T | Reset Features |
|---|---|---|---|
| Oil Service | 15,000 km | 1 year | Discharged separately from inspection |
| Inspection | 30,000 km | 2 years | Requires a complete system inspection |
| LongLife | 30,000 km | up to 2 years | Depends on operating conditions |
| Fixed | 15,000 km | 1 year | Standard interval, easily reset |
The choice between these modes depends on your preferences and operating conditions. If you drive around the city frequently with frequent stops, it is best to use a fixed interval. For road trips and quiet driving, LongLife is suitable.
If you often drive off-road or in dusty conditions, it is recommended to reset the interval more often than indicated in the manual to prolong the life of the engine.
Common errors and ways to resolve them
Sometimes, when trying to reset, problems arise that can confuse inexperienced drivers. One of the most common mistakes is to try to reset when the engine is running. In this case, the system simply does not respond to commands, as priority is given to the operation of the engine.
Another common problem is the lack of access to the menu. If the buttons donβt work, itβs possible that the system is in lock mode or that a firmware update is required. In such cases, it is best to consult professionals or use a diagnostic scanner that can bypass the blockages.
If after the reset, the service message still appears, check if the function is activated. Service Reminder in the settings. Sometimes the system requires not only resetting the interval, but also confirming the replacement of consumables through a special code.
- β Make sure the engine is turned off
- β Check battery charge
- β Try an alternative method of resetting
The most common reason for a failed reset is a working engine. Always check that the ignition is on and the motor is off.
Finally, the service interval is reset by Skoda Kodiaq 2020 is a simple process that can be done on your own. The main thing is to follow the instructions precisely and take into account the features of your equipment. If you have difficulties, you can always use diagnostic equipment or contact specialists.
β οΈ Warning: An improper reset may result in a loss of warranty on some vehicle systems. If you are not confident in your abilities, entrust this procedure to professionals.
Remember that regular maintenance is the key to a long and reliable operation of your crossover. Donβt ignore the warnings, even if you think theyβre wrong. It is better to be safe and check the condition of the car than to face serious breakdowns in the future.
How to reset the service interval on the Skoda Kodiaq 2020 via the menu?
Go to menu Car β Service, select Service Interval and press Reset. Confirm the action by holding your finger on the screen. This is the main method for multimedia systems MIB3.
What to do if the reset through the buttons does not work?
Check if the engine is working. Make sure you press both buttons (OK and time setting) at the same time and hold them for at least 5 seconds. If the problem persists, use an OBD2 diagnostic scanner.
Is it possible to reset the interval without diagnostic equipment?
Yes, in most cases this can be done through the car menu or the buttons on the dashboard. Diagnostic equipment is required only in case of complex errors or system locks.
What information do you need to know before resetting?
You need to know the type of service (oil or inspection), current mileage and operating conditions. This will help you choose the right reset method and avoid mistakes.
Is the interval reset when changing the oil?
Yes, but only if you perform the reset procedure manually. The system will not automatically learn about the oil change and will continue to require a visit to the service.