Wiper blades on Skoda Octavia A8 It is a small but critically important part of driving safety. Poor cleaning glass "janitor" can cause an accident in rain or snow, and worn brushes scratch the windshield, reducing its service life. Owners Octavia A8 (2020-2026) is often faced with the question: which brushes to choose, how to replace them correctly and when to do it?

In this article we will look at sizes of brushes for the Octavia A8Compare popular brands (from budget to premium), give step-by-step instructions for replacement and reveal the secrets of extending the service life. And also – we will answer frequent questions, for example, why new brushes can creak or fit poorly. If you want to save money on the service and do everything yourself, this guide is for you.

Sizes of wiper brushes for the Skoda Octavia A8

The first thing you need to know is The length of the brushes depends on the configuration and year of manufacture Octavia A8. The base version (from 2020 to 2026) is usually equipped with brushes of the following sizes:

  • πŸš— Driver's side: 650 mm (long brush)
  • πŸš— Passenger side: 400 mm (short brush)
  • πŸš— Rear windshield wiper (for hatchback): 300–330 mm

However, in some modifications (e.g., Octavia A8 RS or versions with a panoramic roof) the dimensions may vary. So as not to be wrong, measure old brushes or check the data in service book. The dimensions are also sometimes indicated on the back of the original brushes. Skoda.

Model Octavia A8 Year of issue Driver brush (mm) Passenger brush (mm) Rear brush (mm)
Octavia A8 1.5 TSI 2020–2026 650 400 300
Octavia A8 RS 2.0 TSI 2021–2026 650 450 330
Octavia A8 Combi 2020–2026 650 400 350

Important: on the restyled versions of the Octavia A8 (since 2023), brushes with modified mounting geometry are sometimes installed - check compatibility before buying!

Which brushes to choose: a comparison of brands and technologies

The market offers dozens of options – from cheap β€œnouneim” brushes to premium models with graphite coating. We tested popular brands and identified the best options for Octavia A8:

  • πŸ’Ž Premium class: Bosch Aerotwin (Silent, with aerodynamic profile), Valeo Silencio X-TRM (for extreme conditions)
  • πŸ”§ Optimal price/quality ratio: HELLA Twin Blade, DENSO Hybrid (hybrid rubber + graphite)
  • πŸ’° Budget: SWF VisioNext, Champion EasyVision (Suitable for rare use)

Among technologies stand out:

  • πŸ”¬ Graphite coating Reduces friction, prevents creaking.
  • 🌬️ Aerodronamic spoiler Improves the pressure at high speeds.
  • ❄️ Winter brushes with a protective cover against icing (for example, Bosch Winter).
⚠️ Attention: cheap brushes with Aliexpress often have rubber-stiffnessThey either clean the glass poorly or scratch the glass. Check the reviews before buying!
πŸ“Š Which brushes do you prefer for your Octavia A8?
  • Premium brands (Bosch, Valeo)
  • Middle segment (HELLA, DENSO)
  • Budget (SWF, Champion)
  • I don't know what to choose

Step by step instructions for replacing brushes with Octavia A8

Replacing brushes with Skoda Octavia A8 takes no more than 10 minutes and requires no tools. Follow the algorithm:

  1. Raise the wiper to the vertical position (perpendicular to the windshield). Be careful not to drop it so as not to damage the mechanism!
  2. Find the retainer (This is usually a plastic clamp or button on the back of the brush). On the original brushes. Skoda type mount is used Hook (U-shaped).
  3. Press the latch And move the brush down to take it off the lever.
  4. Install a new brush, aligning the mount with the lever until it clicks.
  5. Lower the wiper And check the work on the wet glass.

If the brushes do not fit tightly, check:

  • πŸ”§ Correct installation (sometimes the mounting is not fully snapped).
  • πŸ“ Size matching (too long brushes can cling to the racks).
  • 🧴 Contamination of the windshield (fat or wax interfere with the fit).

β˜‘οΈ Preparing to replace brushes

Done: 0 / 4
⚠️ Note: If after the replacement of the brush divorce, the reason may be windshield Or the remnants of old rubber. Try to clean the glass. isopropyl alcohol.

When to change brushes: signs of wear

Manufacturers recommend changing brushes every 6–12 monthsHowever, in practice, the duration depends on the intensity of use. Pay attention to these. signals:

  • πŸ”Š Creaking or noise When working - a sign of hardened rubber.
  • 🌧️ Stripes or divorces on the glass after cleaning.
  • πŸ“‰ Reduced visibility In the rain (the water film is not removed).
  • πŸ‘€ Visible cracks Or the detachment of the rubber from the frame.

The brushes also wear out faster if:

  • 🚘 The car is often in the open air (UV rays destroy rubber).
  • ❄️ You use wipers to clean the ice (this spoils rubber!).
  • 🧼 Wash the glass with aggressive detergents (for example, with abrasives).
πŸ’‘

Before winter, treat brushes with silicone lubricant (for example, WD-40 Specialist Silicone) will prevent cold-up and extend the service life.

Common problems and their solutions

Even after the replacement, the brushes may not work perfectly. Let's look at typical situations:

1. The brushes creak

Reasons:

  • πŸ”Ή The new tires have not worn out yet (give 1-2 days).
  • πŸ”Ή Then the glass washed after the staining. alcohol or special cleaner).
  • πŸ”Ή The brushes are too hard for your glass (try a graphite-coated model).

2. Brushes don't clean the edges of glass

Possible problems:

  • πŸ”Ή Incorrect size (too short brushes).
  • πŸ”Ή The curved lever of the wiper (need to be straightened or replaced).
  • πŸ”Ή Pollution of guides (clean them) toothpick).

3. The back janitor is not working well.

On Octavia A8 Combi The back brush is often clogged with dirt. Decision:

  • πŸ”Ή Take off the brush and wash it. warm water and soap.
  • πŸ”Ή Check the spring of the lever - it can weaken with time.
Why do brushes wear out faster in winter?

In the cold, rubber loses its elasticity, and salt and sand from the road act as an abrasive. In addition, ice brushes are often included "dry", which accelerates wear.

How to prolong the life of wiper brushes

Compliance with simple rules will help save on frequent replacements:

  1. Clean your brushes regularly from dirt and sand (it is enough to wipe them with a wet wipe once a month).
  2. Do not turn on the wipers on dry glass - this wears out the rubber. First, wet the glass with washer.
  3. Park in the shade or use sun screen β€” UV rays destroy rubber.
  4. In winter, lift the janitors. They are cold, so they don’t get caught in the glass.
  5. Use quality washer fluid (no aggressive surfactants).

If the brushes long-term (for example, after winter), their rubber can be deformed. Restore elasticity will help processing glycerin or special air conditioners for rubber.

πŸ’‘

The most common mistake of the owners of the Octavia A8 is the use of wipers to clean the ice. It ruins both the brushes and the glass. Always thaw the ice with a scraper or washer first!

FAQ: answers to frequently asked questions

Can I put my hair longer than the original?

No, it's fraught wiper-overload and damage to the machinery. The maximum deviation from the original size is Β± 20 mm. For example, instead of 650 mm, you can put 670 mm, but not more.

Why do new brushes leave streaks?

The reasons may be different:

  • πŸ”Ή Factory lubrication on new tires (wipe your brushes with alcohol).
  • πŸ”Ή Greasy glass (clear silicone-free).
  • πŸ”Ή Poor quality tires (return the brushes under warranty).
How to remove the brush if the lock is broken?

If the plastic clip is cracked, carefully pry up the brush flat screwdriver on the back of the lever. The main thing is not to damage the paintwork of the hood!

Is it possible to restore old brushes?

Partially yes. Rinse them in warm soapy solution, remove dirt from the hinges and treat the rubber silicone grease. But if the rubber is worn or cracked, restoration is pointless.

What brushes are best for winter?

The optimal choice is models with winter cover (for example, Bosch Winter or Valeo Snow). They prevent icing and retain elasticity longer in the cold.