Owners Škoda Kodiaq often faced with a dilemma: leave the stock wheels R18 or upgrade to more stylish and dynamic R19. The transition to 19-inch wheels changes not only the appearance of the crossover, but also its behavior on the road - from handling to comfort. However, not all R19 wheels are created equal: the wrong choice can lead to friction on the wheel arches, premature wear of the suspension, or even problems with passing inspection.

In this article we will analyze all criteria for selecting R19 wheels for Kodiaq (including restyled 2021+ models), compare popular brands, reveal the nuances of compatibility with different types of tires and provide a checklist for checking before purchasing. We’ll also answer a question that torments many: is the game worth the spark plug? After all, large wheels are not only about aesthetics, but also about compromises.

Technical parameters: which R19 wheels are suitable for Kodiaq without modifications

The first thing to remember: Škoda Kodiaq Comes with wheels from the factory R17–R20, but the mounting parameters and overhangs are strictly regulated. For R19 Three numbers are critical:

  • 🔧 PCD (bolt pattern): 5×112 - standard for all modifications of Kodiaq, including RS and Sportline.
  • 📏 offset (ET): from 40 up to 48 mm. Standard values - ET45 for most versions.
  • ⚙️ Center Hole (DIA): 57.1 mm. Larger diameter discs will require adapter rings.

Exceeding the permissible overhang (ET < 40) will lead to disc friction on the brake caliper, and too large (ET > 48) - will move the wheel inside the arch, increasing the load on the wheel bearing. On restyled Kodiaq 2021+ with electronic suspension DCC it is recommended to adhere to ET42–45 for correct operation of the sensors.

📊 What size rims does your Kodiaq have?
  • R17
  • R18
  • R19
  • R20
  • Other

Standard R19 wheels from Škoda: part numbers and features

Factory wheels R19 installed on Kodiaq in top trim levels Style, Sportline and RS. Their main advantage is guaranteed compatibility with the system ESP and sensors TPMS. Below are the current articles and their characteristics:

Article Disk model offset (ET) Width(J) Applicability
5E0601025B Trigon (5 spokes) 45 8J 2017–2020, all engines
5E0601025AN Polaris (two-color) 42 8.5J 2021+, RS/Sportline
5E0601025AM Vega (black gloss) 45 8J 2020–2023, Style

Original discs are manufactured by the company Ronal Group (Germany) and have weight ~10.5–11.2 kg - this is important for balancing. Copies from Replika or Dezent can weigh up to 1–1.5 kg more, which will affect the suspension life. Check the markings: there should be a logo on the inside of the original Škoda and on inscription MADE IN GERMANY.

⚠️ Attention: Discs from VW Tiguan Allspace (even with identical parameters) may not be suitable due to differences in sensor offsets ABS. Always check the VIN database ETKA.

Non-original wheels: which brands to choose and what to pay attention to

If the original discs seem too expensive (the price of new ones reaches 80–120 thousand rubles. per set), consider alternatives from trusted manufacturers. The main thing is to avoid “non-name” brands from the Middle Kingdom, whose wheels often have imbalances and low corrosion resistance.

  • 🏆 Premium segment: BBS (series CH-R), OZ Racing (Superturismo LM), AEZ (Le Mans). Weight - from 9.8 kg, price - 15–25 thousand rubles. per disc.
  • 💰 Average price tag: Dotz (Dakar), Alutec (Monza), KFZ (Tornado). Weight - 10.5–11 kg, price - 8–12 thousand rubles.
  • 🛡️ Budget but reliable: Replika (copies of originals), Trek (Drift), Niche (Targa). Important: check the certificate TÜV or ECE.

When purchasing non-original discs, be sure to check:

  1. Certification for Škoda Kodiaq (some models are only certified for VW).
  2. Warranty for radial and axial runout (admission - no more 0.5 mm).
  3. Availability Humpov (protrusions for tubeless tires) - without them there is a risk of depressurization of the wheel.

Check PCD and offset with Kodiaq technical card|

Check the weight of the disc (optimally up to 11 kg)|

Make sure you have the TÜV/ECE certificate|

View reviews of a specific model on Drive2|

Order a 3D model of a wheel for virtual fitting (service Wheel-size.com)-->

Tire compatibility: what tire sizes are suitable for the R19

Go to R19 automatically narrows down the choice of tires. Standard Škoda recommends tires of size 235/50 R19, but other options are also allowed - subject to preservation wheel outer diameter (no more than ±3% from the original). Let's look at the proven combinations:

Tire size Disc width (J) offset (ET) Notes
235/50 R19 8.0–8.5J 42–45 Škoda approved, ideal for winter
235/45 R19 8.0J 45 Low profile tires, hard ride
255/40 R19 8.5–9.0J 38–42 Requires rolling out arches, summer option

For winter use it is better to avoid the profile below 50 — such tires absorb bumps worse and wear out faster in the snow. Also note that the width 255 mm may require wheel alignment adjustments (angle camber must be within -0.5°…+0.3°).

⚠️ Attention: When installing tires 255/40 R19 on Kodiaq with all-wheel drive 4×4 system errors are possible Haldex due to the difference in wheel diameters. The solution is to flash the control unit or return to standard dimensions.
💡

Before buying tires, check their compatibility with wheels using the calculator on the website TyreReview. Enter the wheel parameters and desired tire size - the system will show possible problems with ground clearance or speedometer.

Installation and balancing: step-by-step instructions

Even perfectly matched wheels R19 can turn your trip into a nightmare if not installed correctly. Here are the key steps in the process:

  1. Removing old wheels. Use a torque wrench to loosen the bolts (torque - 120 Nm). Do not use an impact wrench!
  2. Cleaning the hub. Remove rust and dirt from the seat with a wire brush. Apply a thin layer copper grease to the center
  3. Installing the disk. Align the holes and tighten the bolts crosswise in 2 steps: first 50 Nm, then 120 Nm.
  4. Balancing. On disks R19 permissible imbalance - no more 5 g to the side. Use weights on the inside (hidden installation).

After installation, be sure to:

  • 🔄 Check wheel alignment (even if the disks are standard).
  • 📱 Reset settings TPMS via menu CAR → Service → Tyre Pressure.
  • 🚗 Test the brakes at speed 80–100 km/h — new disks may change the heat dissipation.
What should I do if vibration appears after installing R19?

Vibration at speed 90–110 km/h most often associated with:

1. **Unbalance** - check the balancing on a machine with laser alignment.

2. **Deformation of the disc** - even a slight bend (from 0.3 mm) is felt on large wheels.

3. **PCD mismatch** - if the bolts are not tightened evenly, the disc “walks” on the hub.

Solution: reinstall the wheels, swap them (front-back). If the vibration remains, diagnose the suspension (the silent blocks may be worn out).

Pros and cons of R19 wheels on Kodiaq: is it worth overpaying?

Let's take an honest look at what you gain and what you lose by switching to R19:

Pros Cons
✅ Aesthetics: visually reduces the gap between the wheel and the arch, making the car sportier. ❌ Price: a set of original wheels + tires will cost 200–300 thousand rubles.
✅ Handling: Reduced tire lateral deflection improves steering response. ❌ Comfort: low-profile tires transmit all road irregularities.
✅ Brake dynamics: Larger discs cool better, reducing the risk of fading. ❌ Suspension resource: increased load on wheel bearings and shock absorbers.

If you drive mainly in the city or on smooth roads, R19 may be justified. But for off-road or regions with bad roads it is better to stay on R17–R18. On Kodiaq with air suspension DCC switching to R19 requires reconfiguring the control unit firmware - otherwise the system will incorrectly interpret the ground clearance.

💡

The best option for most Kodiaq owners is R18 wheels with 235/55 tires. They give 90% of the visual effect of the R19, but without losing comfort and suspension life.

Common mistakes when choosing and how to avoid them

Even experienced car owners sometimes fall into traps when buying wheels. R19. Here are the most common mistakes:

  • 🔴 Ignoring weight. The disk is heavier 11.5 kg worsens acceleration dynamics and increases fuel consumption by 0.3–0.5 l/100 km.
  • 🔴 Buying "universal" disks. For example, disks from Audi Q5 may not be suitable due to differences in sensor offsets ABS.
  • 🔴 Savings on balancing. Imbalance on R19 appears already at 3 g, whereas on R17 threshold - 10 g.
  • 🔴 Ignoring seasonality. Winter tires on R19 should be on 10–15 mm already summer ones to maintain clearance.

To avoid mistakes, use 3D configurators (for example, on sites Wheel-size.com or TireRack), where you can virtually try on wheels on Kodiaq. It is also useful to read reviews on Drive2 or Kodiaq-Club.ru — specific models of wheels and their behavior on Russian roads are often discussed there.

⚠️ Attention: If after installation R19 the icon lit up on the dashboard ESP or ABS, immediately check the compatibility of the rims with the wheel sensors. In 30% of cases the problem is solved by flashing the unit ECU.
Is it possible to install R19 wheels with ET35 offset on Kodiaq?

Theoretically yes, but only if used spacers (for example, H&R thick 10 mm). However, this will increase the load on the wheel bearings and can lead to premature wear. For everyday use it is better to stick to the offset ET40–48.

Which R19 wheels fit the Kodiaq RS?

For Kodiaq RS (with engine 2.0 TSI 245 hp) drives with the following parameters are suitable:

  • PCD: 5×112
  • Departure: ET42 (regular)
  • Width: 8.5J
  • Center hole: 57.1 mm

Original articles: 5E0601025AN (Polaris) or 5E0601025AM (Vega).

What is the maximum size of disks that can be installed on Kodiaq without modifications?

Without (rolling out the arches or changing the suspension), the maximum size isR20 with tires 235/40 R20. However for R19 there are no restrictions: they are set to Kodiaq from the factory. It is only important to observe the offset and width of the disc.

How much do original R19 wheels cost on a Kodiaq?

Prices for new original wheels R19 for Škoda Kodiaq (2026):

  • Trigon (5E0601025B): ~22–25 thousand rubles. per piece.
  • Polaris (5E0601025AN): ~28–30 thousand rubles. (two-color).
  • Vega (5E0601025AM): ~24–26 thousand rubles..

Used wheels in good condition can be found for 12–15 thousand rubles. per piece (check for chips and corrosion!).

Is it possible to install R19 wheels with 235/55 tires on the Kodiaq?

No, this size is not compatible. Tire 235/55 R19 has an outer diameter ~760 mmwhat's on 30 mm more than regular. This will lead to:

  • Friction on the wheel arch liners when the steering wheel is turned completely.
  • Incorrect speedometer readings (overestimated by 5–7%).
  • Problems with passing the technical inspection (inconsistency with the vehicle title).

Acceptable dimensions for R19: 235/50, 235/45 or 255/40 (with rolling arches).