In winter, every driver ŠKODA Kodiaq facing the problem of windshield icing. Even modern climate control systems do not always cope with rapid defrosting, especially at low temperatures. The solution becomes heated windshield - an option that greatly simplifies the operation of the crossover in the cold season.
In this article we will look in detail at how heated windshields work. Kodiaq, which models support this function, how to activate it and what to do in case of malfunctions. You will also learn about the benefits and possible risks associated with installing such glass, and receive practical care tips.
How does the heated windshield work on the ŠKODA Kodiaq?
Heated windshield technology is based on thin heating filamentsIntegrated into glass. These threads are made from a special conductive material that heats up when an electric current is applied. Unlike traditional blowing systems, heated glass acts directly, eliminating ice and condensation in a matter of minutes.
On ŠKODA Kodiaq heating is activated via Menu → Comfort → Heated windshield or automatically when the ignition is turned on in frosty weather (if the function is configured). The system consumes approx. 200–300 W energy, which slightly affects the battery charge.
- ⚡ The heating threads are located in the driver's viewing area without interfering with visibility.
- ❄️ Efficiency: complete removal of ice in 3-5 minutes (depending on temperature).
- 🔧 Compatibility: Available for models Kodiaq from 2017 (optional or standard equipment).
It is important to understand that heating only works when the ignition is on. If you leave your car in the cold for a long time, it is recommended to use autonomous heater or cover the glass with a special cover.
- Every day in winter
- Only in severe frosts
- Not needed near home
- I don't use it
Advantages and disadvantages of a heated windshield
The main advantage of heating is saving time on preparing the car for a trip. The driver does not need to scrape the ice or wait for the glass to thaw from the blowing. This is especially valuable for those who live in regions with harsh climates.
However, the technology also has disadvantages. Firstly, replacement cost This type of glass is higher than that of ordinary glass (30–50%). Secondly, if the threads are damaged, the heating may work unevenly or completely fail.
| Benefits | Disadvantages |
|---|---|
| Fast removal of ice and condensation | High replacement cost |
| Improved visibility in cold weather | Risk of damage to threads during repairs |
| Reducing the load on the climate control system | Battery consumption |
| Durability (thread lifespan - 10+ years) | Not all service stations undertake repairs |
If you plan to install heating on Kodiaq abnormal, please note that this may affect the warranty. Official dealers ŠKODA It is recommended to use only original heated glass to avoid electrical problems.
Before purchasing heated glass, check its compatibility with your modification Kodiaq. Some windows for diesel versions have differences in connection connectors.
How to activate the heated windshield?
On ŠKODA Kodiaq heating is turned on in two ways:
- Via multimedia system
ColumbusorAmundsen:Main menu → Comfort → Heated windshield - Automatically at temperatures below
+5°C(if the function is activated in the settings).
If the keep warm button is not in the menu, your model may not be equipped with this option. You can check this using the VIN code through the service ŠKODA Connect or from an authorized dealer.
Turn on the ignition|Activate heating through the menu|Run your hand over the glass - you should feel warm|Make sure that the threads are heated evenly-->
If heating does not work, check:
- 🔌 fuse
F37(20A) in the fuse box. - 🔧 Connection of connectors under the hood (near the glass).
- 📊 Settings in
Bordcomputer(the feature may be disabled).
Is it possible to install heating on a Kodiaq yourself?
Theoretically yes, but in practice it is a difficult task. For installation you will need:
- Remove the old glass (risk of damage to the body).
- Connect the power connectors to the on-board network.
- Configure the system via a diagnostic scanner (for example,
VCDS).
No experience working with auto glass or electrical ŠKODA It is better to contact a specialized service. Average installation cost in Russia - 15 000–25 000 ₽ (excluding glass price).
⚠️ Caution: Incorrect connection may cause short circuit or tripping airbag (if the sensors are damaged).
If you decide to install it yourself, use only original glass with the article number 6U5 845 001 (for Kodiaq 2017–2023). Non-original analogues may not be suitable in terms of connectors or thickness.
What happens if you connect non-original glass?
Mismatched connectors can lead to errors in the on-board computer (for example, 01517 - Open glass heating circuit). In some cases, this blocks the operation of other comfort systems, such as heated seats or mirrors.
Repair and replacement of heated glass
If cracks appear on the glass or the heating threads stop working, it must be replaced. Repairing the threads is almost impossible - they are soldered into the glass at the factory. Average cost of new glass for Kodiaq — 40 000–60 000 ₽ (depending on the region).
When choosing a service station, pay attention to:
- 🛠️ Availability of a certificate for working with auto glass ŠKODA.
- 🔧 Using original adhesive-sealant (for example,
SikaTack). - 📋 Warranty on work (at least 1 year).
After replacing the glass, you need to calibrate the camera Front Assist (if installed). This can only be done in the official service ŠKODA using diagnostic equipment.
⚠️ Attention: If the indicator lights up after replacing the glassESPorFront Assist, contact service immediately. This may indicate improper installation or damage to the sensors.
Tips for caring for a heated windshield
To extend the life of your heated glass, follow these guidelines:
- 🧴 Use only alcohol-free glass cleaners (alcohols destroy threads).
- ❄️ Do not scrape ice with metal scrapers as this may damage the heating elements.
- 🚿 Avoid high pressure washing in the glass area.
- 🔌 Check the fuse regularly
F37(especially before winter).
If small chips appear on the glass, do not delay repairs. Even minor damage can cause cracks to spread, rendering heating ineffective.
Using heated glass at temperatures below -20°C may increase the load on the battery. If the car has been parked in the cold for more than 12 hours, first warm up the engine for 5–10 minutes.
Frequently asked questions about the heated windshield on the Kodiaq
Is it possible to turn off the automatic glass heating?
Yes, this can be done through the menu Settings → Comfort → Automatic window heating. Disabling the feature is useful if you want to save battery power.
Why does heating only work at the bottom of the glass?
This indicates damage to the upper threads. Most often, the problem occurs after unqualified glass replacement or mechanical damage. The solution is to replace the glass.
Is it possible to install heating on glass without threads?
No, heating is only possible on special glasses with built-in threads. It is impossible to install threads separately.
How long does it take to replace heated glass?
On average, the process takes 3–4 hours (including drying of the glue). Camera Calibration Front Assist adds another 1-2 hours.
Does heated glass affect fuel consumption?
Indirectly yes. Heating consumes battery power, which can increase the load on the generator, especially at idle. However, the influence is minimal (about 0.1–0.3 l/100 km).