Properly selected wiper brushes are the key not only to clean windshield, but also to your safety on the road. For the owner. Škoda Kodiaq This task has its own nuances associated with the design of the levers and the length of the arc. The wrong choice can cause elements to fight against each other or fail to clear critical viewing areas.
In this article, we will discuss in detail the technical characteristics of the windshield cleaning system for all generations of this popular crossover. You will find the exact dimensions in millimeters, original articles from the manufacturer and alternative options from third-party brands. We will also pay attention to the features of the installation to avoid errors when replacing yourself.
Wiper blade sizes for first generation Kodiaq (2017–2021)
First generation crossover Škoda KodiaqThe HOOK, which was released in 2017, received the classic hook mounting scheme, which is the most common in the automotive industry. However, the length of the cleaners themselves is selected with high accuracy under the curved shape of the glass. The standard configuration involves the use of two main brushes of different lengths.
The driver's side requires a longer structure to cover the maximum view area, while the passenger side is equipped with a shorter element. It is important to take into account that the length is indicated in inches, and when ordering analogs, it is necessary to translate them into millimeters, since many manufacturers indicate the dimensions in the metric system.
For windshield Kodiaq I shall use the following dimensions:
- 🚗 Driver side brush: 26 inches (650 mm)
- 🚗 Passenger side brush: 16 inches (400 mm)
- 🚗 Rear window brush: 14 inches (350 mm) - specific shape for the rear door
Some owners prefer to install longer brushes to increase the cleaning area, but this can cause them to touch in the center of the windshield when working, which will cause increased wear and unpleasant creaking.
Current dimensions for the second generation Kodiaq (from 2021)
The second generation model, introduced in 2021, retained the overall geometry of the body, but made a number of changes to the glass cleaning system. Engineers adjusted the trajectory of the levers, which required a revision of the length of the brushes to ensure the perfect fit of the rubber to the surface. Visually, the differences between generations are minimal, but technical compatibility can be compromised.
For Kodiaq II the following dimensions are relevant, which must be strictly observed when buying components:
- 🚗 Driving brush: 26 inches (650 mm) - length remains the same
- 🚗 Passenger brush: 18 inches (450 mm) - enlarged by 50 mm
- 🚗 Rear brush: 14 inches (350 mm) – type of fastening unchanged
Increasing the length of the passenger brush by 2 centimeters allows you to clean a large area in the bottom of the glass, where more dirt and reagents accumulate. Ignoring this change and installing old brushes on a new machine will result in an unpeeled triangle in the viewing area.
Table of original articles and compatible analogues
When choosing wipers, it is not necessary to look only for the original products of the brand. Škoda. There are many high-quality analogues from world brands on the market, such as: Bosch, Valeo, Champion or Denso. The main thing is to choose the right article, corresponding to the length and type of attachment.
Below is a summary table that will help you navigate the range of spare parts. Please note that original numbers may vary depending on the year of manufacture and equipment specifications.
| Brush type | Original Škoda article number | Brand Bosch (analogue) | Brand Valeo (analogue) |
|---|---|---|---|
| Driver (650 mm) | 5Q0955425B | Aerotwin A804S | SWF 119650 |
| Passenger (400/450 mm) | 5Q0955426B | Aerotwin A175S / A185S | SWF 116400 / 116450 |
| Rear (350 mm) | 1K0955435A | Aerotwin AR53U | SWF 117350 |
| Kit (front) | 5Q0955425B + 5Q0955426B | Set A804S + A175S | Set SWF 119650 + SWF 116400 |
The use of frameless brushes (Aerotwin, Flat Blade) is recommended for all generations Kodiaq, since they adapt better to the bend of the glass and do not freeze in winter as quickly as classic frame models. This is especially true for northern regions with harsh winters.
⚠️ Attention: When purchasing analogues, be sure to check the year of manufacture of the car. For the Kodiaq, after the 2021 facelift, the passenger brush has become longer (18 inches), and the installation of the old model (16 inches) is not acceptable.
- Frame
- Frameless
- Sports
- Hybrid
Features of design and mounting on the Škoda Kodiaq
Design of windshield wiper arms Škoda Kodiaq designed in such a way as to provide maximum cleaning angle with minimum operating time. Hook mounting is standard in most markets where this vehicle is sold. This simplifies the replacement process as it does not require special adapters or complex tools.
However, there is a nuance that owners often forget about: the plastic retainer on the lever can be fragile in low temperatures. If you are trying to remove the brush in winter, make sure the lever is warm or warm, otherwise the plastic may crack. Also pay attention to the rubber seals on the levers themselves - they must be intact so that there is no play.
The rear windshield wiper has a different mounting design. A specific clamp is used here, which requires pressing the latch in a certain place. Trying to remove it forcibly without pressing the lock button may result in deformation of the drive mechanism.
- 🔧 Always raise the arms to the vertical position before replacing.
- 🔧 Use a protective film or cloth under the lever to prevent the glass from breaking if it accidentally slips.
- 🔧 Check the condition of the rotation axis before installing new brushes
☑️ Preparing to replace wipers
Step-by-step instructions for replacing front windshield wipers
The process of replacing brushes Škoda Kodiaq does not require contacting a service center and takes no more than 10 minutes if you have experience. However, if this is your first time, follow the instructions carefully so as not to damage the paintwork on the hood or the glass itself. Start by preparing the car: turn off the engine and open the hood to provide easy access to the mount.
First you need to move the wipers to the service position. Turn the ignition on, then turn it off and lower the windshield wiper lever down. Wait a few seconds until it stops in an upright position. If this function is not active, you can manually gently lift the lever by holding it with your hand.
The most crucial moment is removing the old brush. Turn the brush perpendicular to the lever until it stops. You will see a plastic lock that you need to press lightly. While holding the latch, pull the blade down toward the windshield. If you do not press the latch, the mechanism may jam.
Installing a new brush is done in the reverse order. Align the grooves on the mount with the hook of the lever and press the brush until it clicks. Make sure that the latch is locked securely and that the brush does not dangle. Repeat the procedure for the second side.
⚠️ Attention: Never lower the windshield wiper arm onto the windshield without the blade installed. The impact of metal on glass can lead to cracks and costly repairs.
What to do if the brush gets stuck?
If the latch does not press, the mechanism may be frozen or damaged. Try rocking the brush slightly from side to side without applying too much force. As a last resort, use a thin screwdriver to gently pry the latch away, but be careful not to bend the lever.
Technical requirements for rubber pen and seasonality
The material from which the wiper blade is made plays a critical role in its effectiveness. For Škoda Kodiaq It is recommended to use rubber coated with graphite or Teflon, which provides better glide and reduces noise during operation. Ordinary rubber quickly hardens in the cold and begins to leave streaks.
Seasonality is an important factor when choosing. Winter brushes have a special canvas cover that protects the mechanism from icing. Summer models are usually lighter and more aerodynamic. Some owners install hybrid brooms that combine the advantages of both types: they are protected from snow, but have an aerodynamic profile.
It is recommended to replace brushes twice a year: before the start of the winter season and in the spring. This is due to the fact that rubber ages under the influence of ultraviolet radiation and temperature changes. Even if the brush appears intact on the outside, it may lose elasticity and no longer adhere tightly to the glass.
- ❄️ In winter, use brushes with a protective cover and soft rubber
- ☀️ In summer, choose frameless models for better aerodynamics
- 🌧️ Hybrid brushes - a universal solution for the off-season
Before installing new wipers, be sure to wipe your windshield with an alcohol wipe. This will remove grease and dust that can interfere with the rubber's seal and cause vibration.
Diagnosis of faults and when to change brushes
It is quite simple to understand that the windshield wiper blades have exhausted their service life. If during operation there are streaks, stains, or a squeak is heard, this is a sure sign of wear. Do not try to endure and wash the glass more often - this will not solve the problem, but will only accelerate the wear of the rubber bands.
Often the problem lies not only in the rubber, but also in the geometry of the lever. If after replacing the brushes the glass still does not clean, check the angle of the arms. Perhaps they were bent after an unsuccessful attempt to bend them by hand or due to a blow from a branch. In such cases, adjustment of the lever position is necessary.
It is also worth paying attention to the condition of the contact pads. If the rubber is cracked or nicked, replacement is inevitable. The use of special rubber restoration fluids provides only a temporary effect and is not recommended for vehicles operated in harsh conditions.
⚠️ Attention: If you hear a characteristic knocking sound when the wipers operate, stop using them immediately. This may mean that the drive mechanism is damaged or the blade has fallen off the mount, which is dangerous for the windshield.
Regularly checking the condition of your brushes and replacing them promptly is the easiest way to ensure clear visibility and safe driving in any weather.
FAQ: Frequently asked questions about Skoda Kodiaq wipers
Is it possible to install brushes of a different length on the Škoda Kodiaq?
It is technically possible to install brushes 1-2 cm longer, but this is not recommended. Extended length may cause the blades to hit each other in the center of the windshield or hit the pillar, causing mechanism failure or rubber damage.
How to move the wipers to the service position on a Kodiaq?
Turn the ignition on, then turn it off. Within 5 seconds, lower the windshield wiper lever down. The wipers will rise to the vertical position and stop. Now you can change the brushes without the risk of hitting the glass.
What is the difference between frame and frameless brushes for Kodiaq?
Frameless blades (Flat Blade) better adapt to the curve of the windshield Škoda Kodiaq, work quieter and freeze less in winter. Frame models are cheaper, but over time they may no longer fit tightly to the glass due to wear on the hinges.
Do I need to change the rear brush along with the front ones?
No, the rear brush has its own resource and wears out differently. Change it only if streaks or squeaks appear. However, if you see that the front brushes are worn, check the rear ones as well - often dirt on the glass indicates a general problem with water quality or the condition of the rubber bands.
Why do new brushes leave streaks on the glass?
This may be due to dirty glass or improper installation. Wipe the glass with alcohol and make sure that the brush is locked until it clicks. If the problem persists, the tires may be defective or not suitable for your climate.
To summarize, we can say that the correct selection and timely replacement of wipers Škoda Kodiaq is a simple task that only requires attention to detail. Using the table data and following the recommendations, you will ensure comfortable driving and full visibility of the road situation in any weather conditions.
Remember that road safety starts with clean glass. Don't skimp on quality consumables, and your car will always be ready for travel.