How to remove the rear door trim on a Škoda Kodiaq: instructions with photos and secrets

Removing the rear door trim Škoda Kodiaq - a task that owners face when replacing speakers, repairing power windows, or eliminating squeaks. At first glance, the procedure seems simple, but without knowing the nuances it is easy to break plastic clips or damage the wiring. In this article we will analyze a step-by-step algorithm for removing the casing for models 2017–2026, we will indicate the location of hidden fasteners and give advice on how to avoid common mistakes.

Feature Kodiaq — use of combined fastenings: in addition to standard clips, the casing is fixed with metal latches at the handle and plastic pistons at the bottom. If you plan to do any electrical work (for example, changing a power window control unit), you will need to disconnect the battery - but more on that later. Let's start by preparing tools and safety measures.

What tools will you need for the job?

To remove the rear door trim Kodiaq You don’t need a professional set - just a basic tool that you can find in the garage. Main rule: do not use screwdrivers or metal spatulas for prying off plastic. They scratch the surface and break the clips. Optimal set:

• 🔧 Plastic mounting blades (2–3 pcs.) - for neatly snapping off the clips. Instrument panel removal kits are suitable.
• 🔨 10 mm socket wrench or socket — to unscrew the bolt securing the handle (if its removal is required).
• 🔌 Phillips head screwdriver (PH2) - for the screws of the speaker and control unit.
• 📦 Container for small parts - so as not to lose clips and bolts. A plastic box with compartments will do.
• 🧲 Magnetic grip - will help you get the bolts or nuts that have fallen into the door.

If you plan to do electrical work (for example, checking speaker connectors), add to the list multimeter and electrical tape. For models Kodiaq 2020+ may be required special key for removing decorative plugs (article T40172), but it can be replaced with a flat screwdriver, wrapping the tip with electrical tape.

⚠️ Attention: If your Kodiaq equipped with a system Keyless Entry, before removing the casing be sure to disconnect the battery. The handle sensor is connected to the control unit, and an accidental short circuit can damage it. Restoration will cost from 15,000 rubles.

Preparing the door: what to do before removing the trim

Before you begin dismantling, complete a few mandatory steps. This will save time and prevent damage:

1. Lower the window all the way - this will free up access to the window lifter mounting bolts and prevent accidental glass falling when removing the trim.
2. Remove the negative terminal from the battery (if you work with wiring). To do this, unscrew the nut with a 10 mm wrench and remove the terminal, moving it to the side.
3. Close the windows — if you remove the trim with the door open, the wind can slam it and damage the mechanism.
4. Take a photo of the location of the connectors (if you plan to turn them off). This will help you reconnect them correctly.

If additional accessories are installed on the door (for example, threshold illumination or decorative overlays), they also need to be removed. They are usually attached with double-sided tape or clips. For models Kodiaq Scout It may be necessary to dismantle the protective moldings - they are secured with latches that are easy to break if removed carelessly.

Step-by-step instructions: how to remove the rear door trim

The dismantling algorithm is the same for all modifications Škoda Kodiaq (including Sportline and Laurin & Klement), but there are nuances for doors with and without electric drive. Let's consider the universal method:

Step 1: Removing the handle trim

Start with the plastic plug that covers the handle bolt. It is secured with two latches:

1. Pry up the trim from below plastic spatula.
2. Gently pull it towards you - first the lower part will snap off, then the upper one.
3. Unscrew the bolt securing the handle with a 10 mm socket wrench (if it needs to be removed).

Step 2: Removing the Speaker

Rear door speaker Kodiaq It is secured with 3 screws using a Phillips screwdriver. To reach them:

1. Remove the speaker protective grille by prying it from the side with a spatula.
2. Unscrew the screws and carefully pull out the speaker, disconnecting the power connector.
3. Check the condition of the O-ring - if it is torn, replace it (part number 6Q0 858 401).

Step 3: Unclip the Trim Clips

The casing is held on by 8–10 plastic clips and 2–3 metal latches. Procedure:

1. Start with bottom corner of the door — here the clips are most weakly fixed.
2. Insert a spatula between the sheathing and the metal frame and apply gentle pressure.
3. After clicking, move up, repeating the action. Do not pull the trim towards you - just snap off the clips one at a time.
4. Pay special attention to the area near the window regulator — clips often break here due to strong tension.

If the sheathing does not give in, check to see if there are any unnoticed fasteners. In models Kodiaq 2021+ added an additional clip near the lock button - it’s easy to miss.

Step 4: Disconnecting the Connectors

After removing the casing you will see:

• 🔌 Power window control unit connector (white, 6-pin).
• 🔊 Speaker connector (black, 2-pin).
• 🚪 Door sensor connector (if installed).

To disconnect them, press the plastic lock and pull the connector to the side. Don't pull the wires - this may damage the contacts. If the connector does not come off, check whether it is blocked by an additional latch (found on models with Virtual Cockpit).

⚠️ Attention: On Kodiaq with the system Area View (360° cameras) there may be an additional microphone jack in the rear door. It can easily be confused with the speaker connector - before disconnecting, check the diagram (it can be found in ElsaWin by VIN code).

Location of hidden fasteners: where to look for clips

The main problem when removing the skin is missing fasteners. B Škoda Kodiaq they are hidden in unobvious places. Below is a table with the exact location of clips and bolts for doors with electric drive and mechanical window lifter:

Mounting type	Quantity	Location	Features
Plastic clips	8–10 pcs.	Along the perimeter of the casing (lower part, near the handle, under the speaker)	On 2020+ models, clips with an amplifier require more effort when removing.
Metal latches	2–3 pcs.	Upper part of the trim (near the window regulator)	May rust - treat with WD-40 before removing.
Handle bolt	1 piece	Under the decorative trim	10 mm socket wrench. On Kodiaq RS the bolt can be 8 mm under the head.
Speaker screws	3 pcs.	Under the protective net	Phillips screwdriver PH2. On models with Sound System from Canton The screws can be Torx T20.

If, after removing the casing, you find broken clips, replace them with new ones (part number N 908 132 01 for standard, 6Q0 868 241 for reinforced ones). On 2023 models, Škoda has changed the shape of the clips - now they have an additional lock, so the old analogues will not fit.

Common mistakes and how to avoid them

Even experienced car owners make mistakes when removing the trim. Kodiaq. Here are the most common ones and how to prevent them:

• 🔧 Broken clips - occurs due to an attempt to tear off the casing by force. Solution: snap off the clips one at a time, starting from the bottom corner.
• ⚡ Short circuit - if you do not disconnect the battery before working with electrical equipment. Solution: Always remove the terminal, even to replace the speaker.
• 🔊 Damaged connectors — when disconnecting, they pull the wires. Solution: Press the connector latch instead of pulling the cable.
• 🚪 Glass falling - if you do not lower it all the way before removing the casing. Solution: Double check the position of the glass.
• 🔩 Lost bolts — small parts fall through the door. Solution: Use a magnetic grip or place a cloth underneath.

Another common problem is creaking after installing the casing. It appears if the clips are not fully latched or the speaker seal has moved. To avoid this, before assembly, clean the clip seats from dust and lubricate them with silicone grease.

What to do if the clip breaks inside the door?

If part of the clip remains in the frame hole, do not try to pull it out with tweezers - this may widen the hole. Instead:

1. Take a drill with a diameter of 3-4 mm and carefully drill out the center of the clip.

2. Insert a self-tapping screw into the hole and pull out the remaining parts.

3. Replace the clip with a new one using plastic glue (eg Loctite 406).

Sheathing assembly: nuances and verification

Rear Door Trim Installation Kodiaq requires no less attention than dismantling. Follow these rules:

1. Check all connectors - they must be connected until they click. Check the window regulator connector especially carefully: if it is not pressed, the glass will move jerkily.
2. Reinstall the clips - start from the top of the paneling, then move to the bottom. Press down on each clip until you hear a characteristic click.
3. Check the operation of the mechanisms:
   • Raise/lower the window several times.
   • Open/close the door to make sure the sensor is activated.
   • Play music and check the speaker sound.

Adjust the trim position - it should fit tightly to the frame without gaps. If there is a gap near the handle, tighten the fastening bolt.

If after assembly there is a creaking noise when moving, it is likely that the casing is rubbing against the metal frame. To fix the problem, apply a thin layer anti-squeak paste (for example, Liqui Moly Kunststoff-Pflege) on the contact surfaces of the clips.

Frequently asked questions about removing the rear door trim Škoda Kodiaq

Is it possible to remove the casing without removing the speaker?

Technically yes, but it will complicate the process. The speaker blocks access to two clips at the top of the casing, so it will have to be snapped off with great force, which increases the risk of breakage. If you only need to get to the window regulator, you can do without removing the speaker, but to completely remove the trim it is better to unscrew it.

What size clips do I need to replace?

For Škoda Kodiaq 2017–2020 fits clips with article number N 908 132 01 (standard) and 6Q0 868 241 (reinforced for the lower part of the door). For 2021+ models, the clips have been changed - now they have an additional lock (item no. 5Q0 868 241 B). Before purchasing, check the year of your car.

What should I do if the power windows stop working after removing the trim?

Most likely, the problem is in one of three places:

1. Unconnected connector — check the white 6-pin connector of the control unit.
2. Burnt fuse - on Kodiaq The fuse is responsible for the power windows F37 (15A) in the block SCB (under the steering wheel).
3. Broken wire — inspect the harness for damage, especially at the bend near the door hinge.

If the problem is not solved, check the control unit with a multimeter (the voltage on pins 1 and 3 should be 12V when the ignition is on).

How to remove the trim on a door with a system Keyless Entry?

The process is similar, but there are two key points:

1. Disconnect the battery — the sensor in the handle is connected to the control unit, and a short circuit can damage it.
2. Don't touch the antenna Keyless — it is located inside the casing near the handle. The antenna is attached with double-sided tape, and if removed carelessly it can be torn off.

After assembly, check the operation of the system: hold the key to the handle - the door should unlock without pressing the button.

Can I use trim from another door (for example, the front door)?

No, rear and front door trims Kodiaq not interchangeable. They differ:

• The shape and location of the fasteners (there are more clips in the rear door due to the speaker).
• Holes for handle and window lifter.
• The thickness of the plastic (the rear trim is thinner, since there is less load on it).

Even the trims from the rear doors on the left and right sides are mirror versions of each other, but not identical due to the different location of the speaker and the lock button.