Cup holders in Škoda Octavia Tour — it would seem a trifle, but comfort during travel depends on them. Standard solutions from the manufacturer are not always convenient: they are too narrow, slippery or located in an inconvenient place. The problem is especially acute for owners of restyled versions (2021+), where the design of the central tunnel has changed. In this article, we will analyze all the options for cup holders - from original to universal ones, tell you how to install them correctly, and share life hacks for operation.
We analyzed owner reviews, specifications and tests of 15+ cup holder models to create the most comprehensive guide possible. Here you will find not only reviews, but also step-by-step instructions with photos, comparison tables and answers to frequently asked questions. We will pay special attention to the nuances of installation in different generations Octavia Tour (FL, 3rd and 4th generation), as well as compatibility with heating and wireless charging.
Original Škoda cup holders: articles and features
Factory cup holders for Octavia Tour are divided into two categories: built into the central tunnel and removable (additional). The former come as standard, the latter can be ordered from a dealer or purchased separately. Main articles:
- 🔧 5E0 863 251 B — standard cup holder for Octavia III (2013–2020), black plastic, without heating
- 🔥 5E0 863 251 D — heated version (compatible with climate control), requires connection to the on-board network
- 🆕 5Q0 863 251 C — for Octavia IV (2020+), modified shape to accommodate the new tunnel design
- 🔄 3U0 863 251 A — universal removable cup holder (suitable for all generations, attached to a 12V socket)
Original parts have several advantages: perfect fit, warranty protection (if installed by dealer) and system compatibility Canton or Dynaudio, if it is installed. However, the price for them is often too high - from 3,500 to 8,000 rubles per set. In addition, the plastic fades over time, and the rubber inserts wear out, which is why the glasses begin to rattle on uneven surfaces.
⚠️ Attention: Cup holders with article number 5E0 863 251 B not suitable for Octavia Tour 2021+ due to the reshaped center console.Attempting to install them may damage the trim clips.
If you choose the original, pay attention to the package: some items are sold without mounting clips (they must be ordered separately, item no. N 908 132 01). Also check if the set includes rubber gaskets - without them the glasses will slide.
- Standard (factory)
- Original removable
- Universal (third party brand)
- No cup holder
- Another option
Universal cup holders: pros and cons
Universal solutions from third-party manufacturers often beat the originals in price and functionality. They are divided into three types:
- Attached to 12V socket (for example, Heyner 9350 or Kraftex 1010) - easy to install, but take up the charging connector.
- On clips (for example, BGS 9010) - are fixed on the dashboard or central tunnel, but can interfere with gear shifting.
- Retractable (for example, AutoExpert AE-01) - hide in a compartment under the handbrake, but require modification of the fastenings.
Advantages of universal models:
- 💰 The price is 2–3 times lower than the original (from 800 to 2,500 rubles).
- 🔧 Easy to install without tools (except retractable ones).
- 🎨 Wide selection of materials: silicone, aluminum, soft-coated plastic.
However, there are also disadvantages. For example, models with suction cups (e.g. RoadPro RPSC-1) often fall off in heat or vibration. And retractable options can block access to USB port or button Auto Hold, if installed incorrectly.
| Model | Mounting type | Price, rubles | Compatible with Octavia Tour | Cons |
|---|---|---|---|---|
| Heyner 9350 | To 12V socket | 1 200 | All generations | Occupies charging port |
| BGS 9010 | On clips (dashboard) | 1 800 | Octavia III/IV | Interferes with gear shifting |
| AutoExpert AE-01 | Retractable (under the handbrake) | 2 500 | Octavia III only | Requires modification of fastenings |
| Kraftex 1010 | To 12V socket | 900 | All generations | Low quality plastic |
Important: Retractable cup holders AutoExpert AE-01 incompatible with Octavia Tour 2020+ due to the changed design of the central tunnel. Installing them will require drilling, which will void your interior warranty.
Step-by-step instructions for installing the original cup holder
If you have chosen an original part (for example, 5E0 863 251 D heated), follow these instructions. To work you will need:
- 🔧 Plastic spatula (to avoid damaging the casing).
- 🔩 Torx T20 (for removing the tunnel cover).
- 🔌 Multimeter (to check the heating connection).
Step 1. Removing the old cup holder
Carefully pry up the plastic trim around the cup holder with a spatula. B Octavia Tour it is attached with 4 clips. Disconnect the heating connector (if there was one). For non-heated models, simply lift the part upwards.
Step 2: Preparing the New Cup Holder
If you have a heated version (5E0 863 251 D), check the integrity of the contacts on the connector. If necessary, clean them with alcohol. For models without heating, this step can be skipped.
Step 3. Installation and connection
Insert the new cup holder into the slots and snap the clips into place. For heated versions, connect the connector to the on-board network (wire colors: red - “+”, black - “-”). Check the heating operation by applying 12V voltage to the contacts.
Step 4. Check
Make sure the cup holder is not loose. Place a glass of water and drive along an uneven road - if the liquid does not spill, the installation was successful.
Check the cup holder part number for compatibility with your generation Octavia Tour|
Disconnect the battery (if you are working with heating)|
Prepare tools: T20 Torx, plastic spatula, multimeter|
Take a photo of the connectors before disconnecting (for heating) -->
How to modify a cup holder for more comfort
Even the original cup holders in Octavia Tour can be improved. Here are some proven life hacks:
- 🧲 Magnetic inserts: Glue thin neodymium magnets (such as
5×2 mm) to the bottom of the cup holder - glasses with a metal base will not pop out. - 🔥 Do-it-yourself heating: If your cup holder is not heated, you can purchase a heating element (for example, Webasto 9000001A) and connect it to the cigarette lighter via a relay.
- 🎨 Anti-slip coating: Apply rubber-based double-sided tape (such as 3M Safety-Walk).
- 🔄 Adjustable height: For universal models (for example, Heyner 9350) you can install telescopic racks from furniture shelves.
If noise from rattling glasses annoys you, try silicone inserts (sold in hardware stores). They come in different diameters - match your cup holder. For example, for the original 5E0 863 251 B suitable insert diameter 65 mm.
⚠️ Attention: When installing magnetic inserts, avoid heated models - magnets can disrupt the operation of the heating element or cause a short circuit if overheated.
For owners Octavia Tour with wireless charging (Qi-standard) it is important to make sure that the metal elements of the modification do not shield the signal. Check your phone's charging before and after modifications.
If the cup holder rattles on bumps, wrap its base with isolon (2–3 mm thick). This will reduce vibration and noise.
Common problems and their solutions
Even after the cup holders are installed correctly Octavia Tour may cause trouble. Let's look at typical problems and how to fix them:
| Problem | Reason | Solution |
|---|---|---|
| The cup holder falls out | Fastening clips are worn out | Replace the clips (part no. N 908 132 01) or use double-sided tape |
| Heating does not work | Contacts are oxidized or fuse is blown | Check the fuse F37 (10A) and clean the contacts with alcohol |
| Glasses are rattling | No anti-slip coating | Install silicone inserts or stick on a rubber mat |
| The cup holder interferes with gear shifting | Incorrect size or type of fastening | Replace with a model with an offset (for example, Heyner 9351) |
If the heated cup holder stops working after washing, water most likely got into the connector. Don't blow dry it - this may damage the contacts. Instead, leave the car with the doors open for 12 to 24 hours or use desiccant bags (silica gel).
Owners Octavia Tour 2020+ sometimes encounter the cup holder blocking access to the button Auto Hold. In this case it will help shortening the base grinder or replacement with a model with a cutout (for example, BGS 9011).
What to do if the cup holder melts?
If the plastic of the cup holder is deformed from the heat, this is a sign of poor quality material. A temporary solution is to wrap it in aluminum foil (reflective side out). But it is better to replace it with a model made of heat-resistant ABS plastic (for example, AutoExpert AE-02).
Comparison of cup holders for different generations of Octavia Tour
The design of the central tunnel in Octavia Tour has changed with each generation, so cup holders are not always interchangeable. Let's look at the key differences:
Octavia Tour III (2013–2020)
- 🔹 The cup holder is integrated into the tunnel trim.
- 🔹 Compatible with articles 5E0 863 251 B/D.
- 🔹 It is possible to install retractable models (for example, AutoExpert AE-01) without modifications.
Octavia Tour IV (2020–present)
- 🔹 The shape of the tunnel has been changed - the original cup holders from the III generation do not fit.
- 🔹 Article for facelift: 5Q0 863 251 C.
- 🔹 Universal models require adapters for mounting.
For Octavia Tour with automatic transmission DSG it is important that the cup holder does not interfere with switching to Sport or Manual. Check this before you buy—on some generic models, the lever rests on the edge of the cup holder.
If you have Octavia Tour Scout (crossover version), keep in mind that due to the increased ground clearance, vibrations are stronger. In this case, it is better to choose a cup holder with shock-absorbing legs (for example, Kraftex 1012).
For Octavia Tour 2020+ only cup holders with article number 5Q0 863 251 C or universal models with adapters are suitable. Installing parts from the third generation will lead to play or damage to the clips.
Owner reviews: what did they choose?
We analyzed reviews on the forums Skoda-Club.ru and Drive2.ru, as well as in VKontakte groups dedicated to Octavia Tour. Here's what the owners say:
- 👍 "Original heated (5E0 863 251 D)": “It helps a lot in winter—the coffee doesn’t get cold. The only downside is the price (7,500 rubles at the dealer).”
- 👎 "Heyner 9350": “Cheap, but after a month it started to play. I had to use sealant.”
- 🤷 "AutoExpert AE-01 (retractable)": "Convenient, but the Auto Hold button interferes with it. I had to modify it with a file."
- 😍 "Silicone inserts": "For 200 rubles we solved the problem of rattling glasses. Better than the original rubber ones."
Interestingly, the owners Octavia Tour with diesel engines (2.0 TDI) more often complain about vibration of the cup holders. This is due to the characteristics of diesel engine operation at idle speed. The problem is solved by installing shock-absorbing pads (for example, made of porous rubber).
They also discuss on the forums illuminated cup holders (for example, LED Car Cup Holder). They connect to the lights and glow at night, but require wiring under the casing. Reviews are contradictory: some praise it for its style, while others criticize it for its fragile LEDs.
FAQ: Frequently asked questions about cup holders for the Škoda Octavia Tour
Is it possible to install a cup holder from an Octavia III in an Octavia Tour IV?
No, due to the changed shape of the central tunnel, the original cup holders from the III generation are not suitable for the IV. Attempting to install them may damage the trim or leave gaps. For Octavia Tour 2020+ you need to look for parts with the article number 5Q0 863 251 C Or universal models with adapters.
Which cup holder should I choose if I have wireless charging?
The best option is the original 5E0 863 251 D (heated) or universal Heyner 9350But with compatibility testing. The main thing is that there are no metal elements in the base that shield the signal. Qi. Before buying, test charging your phone with the chosen model.
What to do if the cupholder rattles on the buds?
Solutions:
- Install silicone inserts (select the diameter under your glass).
- Stick to the bottom of a double-sided rubber-based tape.
- Wrap the base of the cupholder with isolone (thickness 2-3 mm).
- For universal models, check the reliability of the mounts - perhaps the clips have weakened.
Can I install the heating in the cup holder?
Yes, but you will need:
- The heating element (e.g., Webasto 9000001A).
- Relay and safety (10A).
- Wires with a cross section of 1.5 mm2.
Connection scheme: "+" from the cigarette lighter, "-" per mass. The heating should only work when the ignition is turned on. If you do not have experience with electrics, it is better to contact an electrician.
What are the best cup holders for the Octavia Tour Scout?
For the crossover version Scout recommended:
- Original 5E0 863 251 D (Heated, because the cabin is warmer than the other one).
- Universal models with depreciation: Kraftex 1012 or AutoExpert AE-03.
Avoid lightweight plastic cupholders - due to increased clearance, vibrations are stronger, and they will rattle.