Owners Skoda Rapid Often, they need to access the internal back door. Whether itโs replacing a broken window, installing powerful speakers or insulating the cabin for the winter season, the first step is always to neatly dismantle the plastic card. This process requires less physical strength than understanding the design of the mounts and having the right tool to avoid damaging the fragile plastic.
Many car owners are afraid to start such work on their own, fearing to leave characteristic gaps in the doors or break the mounts. In fact, if you know where they're hidden. clamps and how to properly influence the latchesThe procedure will take no more than fifteen minutes. In this article, we will take a look at each step so that you can safely remove the skin and perform the necessary repairs without visiting the service.
Tools and workplace preparation
Before you start to dismantle the door, you need to prepare everything necessary so as not to be distracted in the process. The main enemy in dismantling is the lack of a suitable tool, which often forces the wizard to use screwdrivers that can scratch the plastic or damage the paint coating of the door.
You will definitely need a set of plastic blades or special keys to remove the skin. If you do not have a professional set at hand, you can use an old plastic card, but you need to act with extreme caution. Also useful is a cross screwdriver for twisting screws, which are often hidden under decorative stubs.
- ๐ง Plastic spatula (or a set of tools for the cabin)
- ๐ช Cross screwdriver (size PH2)
- ๐ฆ Lantern (for illumination of hidden fasteners)
- ๐งค Microfiber rag (to protect surfaces)
The workplace should be well lit. It is best to work in the garage or in the open space in the daytime. It is important that there are no extra items that could fall into the doorway after removing the map, as their extraction will be extremely difficult.
โ ๏ธ Warning: Do not use metal screwdrivers to smear plastic! Even if you have a rag, you risk leaving deep scratches on your skin. Skoda Rapid remains critically high, which will significantly reduce the aesthetic appeal of the cabin.
Localization and removal of fasteners
Door design Skoda Rapid It involves several attachment points that are not always visible immediately. The first thing to do is to carefully examine the inner door opening handle. In the recess, where the mechanism is located, a screw is usually hidden that covers the plastic cap.
Carefully put this plug with a plastic spatula and put it in a safe place. Under it you will find a screw that needs to be twisted. Do not make excessive efforts when twisting, so as not to tear the thread, as the plastic of the handle mounting is quite soft.
Pay attention to the bottom of the door map. There is often another screw that is open to access. However, in some versions it can be hidden under a decorative overlay. Use a flashlight to make sure there are no hidden fasteners before you start to force.
- ๐ Check the depression in the door handle for the presence of a plug
- ๐ฉ Check the bottom edge of the map for screws.
- ๐ธ Take a picture of the location of all the elements taken
If your machine has additional protection or specific options, the number of mounting points may vary. Always check the entire surface of the map visually and tactilely, probing possible protrusions that may indicate a hidden screw.
The correct technique of removing a plastic card
After all the visible screws are removed, the most critical moment comes - the detachment of plastic clips. These fixtures hold the map very tightly, and their task is to prevent vibrations during the movement of the car. The main rule here is to act evenly and not rush.
Start to poke the card from the bottom corner, inserting a spatula between the plastic of the door and the skin. The movements should be progressive, with a little effort on yourself, until you hear the characteristic click of the first clip. Do not try to pull the entire map at once, this will lead to breakage of the locks.
Move along the lower edge, then move to the side parts. In the area of the door handle and rear-view mirror, the mounting is especially rigid. Here you need to be extremely careful, since with a sharp movement you can damage the wiring or the card itself.
โ๏ธ Clip-off procedure
When all clips around the perimeter are disconnected, the map will still be held by wires going to the backlight and windows. Donโt try to push it too far to cut off those cables.
Features of fastening in the area of the mirror
At the top of the door, next to the rear-view mirror, an additional lock is often installed, which may not be visible from the outside. If the map doesnโt lend itself, check this area, you may have missed one of the hidden screws or clips located behind the decorative mirror lining.
โ ๏ธ Warning: When disconnecting the card, hold it with one hand so that it does not fall on the floor and damage the wiring or upholstery of the cabin floor. Falling plastic panel can lead to cracks.
- Professional set of shoulder blades
- Old bank card
- Metal screwdriver (with cloth)
- I didn't remove the trim myself.
Disconnecting the electrician and full extraction
When the door map is disconnected from the metal rails but still hangs on the wires, the electrical connectors must be turned off. V Skoda Rapid Usually wires are connected to the illumination of the internal lighting and the lock button of the window lifter.
Find the connectors and gently press the lock to remove the plug. Do this with your fingers, without using screwdrivers, so as not to damage the contacts. If the connector sits tight, you can slightly shake it from side to side, but do not pull the wires themselves.
After disconnecting all connectors, the door map is completely free. Take it off carefully and put it in a safe place where it will not be scratched and will not be exposed to impacts. You now have full access to the interior of the door.
- ๐ Find connectors with lighting wires and buttons
- ๐ Press the locker plug to extract
- ๐งน Put the card in a safe place.
Now you can perform the necessary work: change seals, repair window mechanisms or install sound insulation.
Before turning off the electrician, be sure to remember or photograph the location of the wires so that there is no confusion with the connection of buttons and backlights during the assembly.
Technical features of ล KODA Rapid fasteners
Design of clamps in the model Skoda Rapid It has its own nuances that are important to consider. Unlike some other models of the VAG concern, combined mounts are used here: plastic clips and metal brackets in some areas.
Knowing the location of these elements helps to avoid breakdowns. For example, in the area of the lower part of the door, larger clips are often used that require more effort to exit. At the top, closer to the glass, the fixtures are smaller and more brittle.
Below is a table with the main types of fasteners that can be found when dismantling the rear door:
| Mounting type | Location | Features of dismantling |
|---|---|---|
| Plastic clip | Perimeter of the door. | It requires a uniform effort on itself. |
| Stub screw | In the pen's depression | First you need to remove the decorative lining. |
| Metal bracket | In the castle area | May require removal of the locking ring |
| The screw at the bottom. | The bottom edge of the map | Available without additional manipulation |
Understanding these differences will allow you to find fastening points faster and apply force correctly. Ignoring the design features can cause you to break the mount that should not have been touched.
Reinstalling the trim
The door is assembled in reverse order. First, connect all electrical connectors to a characteristic click, making sure they are fixed. Then combine the card with the metal frame of the door, starting at the top edge to hook the locks.
After the upper part is in place, gently press the rest of the map with your hands. You will hear a series of clicks, indicating that the clips have fallen into place. If some area is not adjacent, do not hit it with your hand, but check whether the lock has fallen or whether the wire is twisted.
Lastly, twist all the screws and install the decorative plugs back. Make sure the card does not thunder or thunder when driving. If there's a backlash, maybe one of the clips didn't sit down to the end.
Before the screws are fully tightened, check the window and backlight to make sure all the connectors are connected correctly and nothing interferes with the movement of the mechanisms.
โ ๏ธ Note: When re-installing, make sure that the rubber door seal is not sandwiched between the card plastic and the metal, as this can lead to water entering the cabin and corrosion.
Common mistakes during dismantling
Beginners often make mistakes that lead to additional costs. The most common problem is trying to remove the card without twisting all the screws. This inevitably leads to the breakdown of plastic latches that are not designed for such a bending.
Another mistake is using the wrong tool. Metallic objects leave deep scratches that cannot be removed by polishing. Also often forget to turn off the battery terminals, although in this case it is not critical, but when working with the wiring of the windows, it is better to be safe.
It is also important not to forget about the protection of the wires. If you throw the card too far, you can damage the insulation of the wires or break the connector itself. Always keep the map under control.
- โ Do not remove the card without unscrewing all screws
- โ Do not use metal screwdrivers for tweaking
- โ Do not pull on wires when disconnecting connectors
Compliance with these simple rules will allow you to maintain the integrity of the cabin and avoid unnecessary costs for replacing parts. Dismantling the skin is a routine procedure that, with the right approach, does not cause difficulties.
The main secret of successful dismantling is patience and the use of the right plastic tool that leaves no traces on the surface of the cabin parts.
FAQ: Answers to popular questions
Do I need to remove the battery before removing the trim?
To remove the door paneling on Skoda Rapid It is not necessary to turn off the battery. However, if you plan to work with window wiring or install a new audio system, it is better to turn off the negative terminal for safety.
What should I do if the clip breaks during removal?
If the lock is broken, don't panic. In auto stores, universal or specialized clip kits for VAG cars are sold. Simply replace the broken item with a new one before installing the card back.
How to remove a card if there are no special shoulder blades?
In extreme cases, you can use an old plastic card or a thick ruler. The main thing is to wrap it with tape or cloth so as not to scratch the plastic. Metal tools are not recommended for use.
Why does the hull thunder after installation?
It can rattle loudly due to the fact that one of the clips did not stand in place or broke. Also, the cause may be a loosely pressed seal or lack of sound insulation inside the door. Check all the locks.
Can I remove the card without disconnecting the wires?
No, the card cannot be completely removed without disconnecting the wires, since they are connected to the buttons and backlight. An attempt to tear off the card with the wires will lead to the break of contacts and failure of electrical components.