Comfortable trip in the car Skoda Superb It is impossible without clean air in the cabin. Over time, the ventilation system gets clogged with dust, pollen and small particles, which reduces the efficiency of the air conditioner and can lead to an unpleasant smell. Regular replacing the cabin filter This is the simplest procedure that the owner can perform independently without resorting to the services of service centers.
Many car owners ignore this element of service, considering it to be secondary. However, a clogged filter creates an increased load on the stove engine, worsens visibility due to fogging of the glasses and reduces the quality of air purification for passengers. In this article, we will discuss in detail how to choose the right spare part and how to properly carry out replacement work on different generations of the model. Superb.
Why you need a timely replacement of the filter in the Skoda Superb
Main task cabin filter Detaining contaminants before they enter the space inside the vehicle. In the conditions of a modern metropolis, where the air is saturated with exhaust gases and industrial emissions, this barrier works at the limit of its capabilities after 10-15 thousand kilometers of run.
If you donβt change the item in time, you will face a number of problems. First, the efficiency of the climate system will decrease. The fan engine will start working at increased revs to pump air through the clogged structure, which will lead to its overheating and possible failure.
Secondly, the risk of allergic reactions in passengers increases. The old filter becomes the perfect environment for bacteria and mold to grow, especially if the car was often driven with the humidifier on or after rain. The smell of dampness in the cabin is a sure sign that the filter element requires immediate replacement.
In addition, a clogged filter can cause fogging of the glasses. When the airflow weakens, the system does not have time to remove moisture effectively, which reduces the safety of driving in wet weather. Timely replacement is the key to not only comfort, but also your safety on the road.
Choosing the right filter: types and manufacturers
Before you start buying, you need to decide on the type of filter that is suitable for your version. Skoda Superb. There are two main types: ordinary coal and without coal impregnation. Conventional filters only trap mechanical particles, while coal filters also absorb harmful gases and odors.
For the city, especially with heavy traffic, it is highly recommended to install it. carbon filter. It copes more effectively with exhaust gases coming from cars in front, and prevents unpleasant odors from entering the cabin. Conventional white filters are better suited for rural areas or clean air trails.
There are many brands on the auto parts market. Original from Skoda It always guarantees perfect quality and seating, but its price can be overpriced. The alternatives are proven aftermarket manufacturers: Mann-Filter, Mahle, Bosch, Purflux and Corteco. These brands offer quality comparable to the original at a more affordable price.
Pay attention to the year of manufacture of your car. Models Superb The first generation (up to 2008) and the second generation (2008 to 2015) have different mounting designs and filter sizes. The third generation (since 2015) has its own characteristics. An error in the choice of the model can lead to the fact that the filter simply does not stand in the case.
Preparing tools and work area
The replacement procedure does not require complex specialized equipment. You will need a set of basic tools that are in the arsenal of any motorist. The main requirement is a clean and well-lit place where you can conveniently sit in front of the instrument panel.
You will need:
- π§ Cross screwdriver (usually size PH2) for unscrewing screwdrivers;
- π¦ Lantern or headlamp for illumination of the space under the glove compartment;
- βοΈ Scissors or a stationery knife (sometimes old filters get stuck tightly in the case);
- 𧀠Gloves to protect your hands from dirt and remnants of an old filter.
Before starting work, be sure to make sure that the engine is silenced and the ignition is turned off. This is necessary to avoid accidental activation of the fan of the stove or activation of servo drives, which can make it difficult to access the filter. It is also recommended to open the hood for better ventilation if the work is carried out in the garage.
If you are planning a replacement in the winter, let the engine cool down completely. Metal parts under the hood and interior elements can be cold and brittle, which increases the risk of damage if handled carelessly.
- Regular paper
- Carbon filter
- Reusable filter
- I only buy the original
Step by step replacement instructions for the Skoda Superb II and III
Most models Skoda Superb (second and third generation) salon filter is located behind the glove nucleus (loop). This is the standard solution for Volkswagen Group vehicles. The process of dismantling the filter cover requires care so as not to break the plastic fixtures.
First, you need to completely lower the glove box. Then open it and put it on the side walls to get out of the grooves. Some versions of the car may have limiters that need to be snapped away by gently pulling them in.
Next, you will see the plastic cover of the filter body. It is mounted on several latches or screws. If screws are used, unscrew them with a screwdriver. If the fixers - gently press them and remove the lid. Be careful not to put too much effort, as plastic can be brittle after long-term use.
Take out the old filter. Pay attention to the direction of the arrows of air flow on the body of the old element. This is important for the proper installation of the new filter. If there is no arrow, remember which side of the filter was facing you.
Clean the seat from dust and debris. Use a vacuum cleaner or a wet napkin. The filter body often gets leaves, dirt and insect residues, which can clog the fan of the stove.
Install a new filter, observing the direction of the air flow. The arrow on the filter must point downwards or towards the side indicated on the body (usually "AIR FLOW"). Tightly insert the filter into the slots so that there are no gaps through which unfiltered air could enter the cabin.
βοΈ Preparing for replacement
Features of replacement for the Skoda Superb I (until 2008)
On first generation cars Skoda Superb (often referred to as "Skoda Baby" or "Superb 1") the location of the filter is different. In some versions, it is under the hood, in the area of the windshield, on the passenger side. This is a more difficult option for self-replacement.
To access the filter, you need to open the hood and find a plastic casing that closes the entrance to the ventilation system. It's mounted on a few screws. Unscrew them and remove the casing. Be careful as there may be electrical connectors or glass washer hoses underneath.
Sometimes the filter is hidden in a hard-to-reach place under the instrument panel, access to which is only possible through the removal of part of the skin. In this case, it is recommended to refer to the documentation for the repair of a specific modification or use special tools for dismantling.
It is important to note that on older models, the filter body can be heavily contaminated with corrosion or dirt. Before installing a new element, thoroughly clean all surfaces to avoid skewing the cover and getting dust into the cabin.
What to do if the filter does not fit?
If the new filter does not fit into the body, do not try to push it by force. Check the correct orientation (air arrow) and make sure you have purchased the model that is suitable for your year of release. Occasionally, manufacturers change the body design in the middle of the model year, and the 2010 filter may not fit the 2009 car.
After installing the filter on the first generation models, return the casing to its place and twist the screws. Make sure all latches are working and the casing fits tightly to the body to avoid water entering the ventilation system during rain.
Before buying a filter, measure the dimensions of the old element with a ruler. This will help make sure you choose the right model, especially if the original marking has worn off.
Frequent errors and technical nuances
One of the most common mistakes is to ignore the direction of airflow. Installing the filter backwards causes it to clog quickly as air passes through a dense layer rather than through the filter material. This drastically reduces the life of the element.
Another mistake is using filters of the wrong size. If the filter is too small, there are gaps between it and the body, through which dirty air enters the cabin. If it is too large, it cannot be installed without deformation, which violates the tightness of the system.
Never try to rinse or rinse a disposable filter. This is useless and can damage the structure of the material. Disposable filters are designed for one cycle of use and are subject to recycling after replacement.
Sometimes when removing the filter cover, plastic fixtures can be damaged. If this happens, do not rush to change the entire cover. Often, the fixers can be replaced separately or gently glued with a special glue for plastic if the crack is not critical.