You got behind the wheel Škoda And suddenly you notice on the dashboard an unfamiliar symbol -- flashing, burning red or yellow? Don’t panic: Most indicators don’t signal a breakdown, but simply inform you about the operation of your vehicle’s systems. But some require immediate action. In this article, we will discuss all Škoda badges - from standard (for example, ⚠️ ABS) to model-specific Octavia A8, Kodiaq or Enyaq.

The manufacturer uses a unified notation system for most models, but there are nuances. For example, battery icon on Škoda Fabia It can mean low charge, but in hybrid Enyaq iV Problem with high-voltage battery. We have gathered up-to-date information for 2026, including indicators for electric cars and driver assistance systems.Travel Assist, Lane Assist).

Color of icons: what does red, yellow and green mean?

The first thing you need to pay attention to is indicator color. It will tell you how urgent a response is needed:

  • 🟢 Green The system is active and operating correctly (e.g., enabled) cruise control or heated seats).
  • 🟡 Yellow/orange - a warning. Checks are required soon (e.g., low oil level or brake pad wear).
  • 🔴 Red — immediate stop! No movement until the problem is resolved (e.g., engine overheating or brake system failure).
  • 🔵 Blue/cyan - an information signal (e.g., high beam or Eco mode).

On models Škoda with digital panel Virtual Cockpit (available for Octavia RS, Superb, Enyaq) icons may be enlarged with text explanation. If the indicator flashes, it is always a reason to be alert, even if it is yellow.

⚠️ Attention: Red badge oil cans with a wavy line beneath it (🛢️~means critical drop in oil pressure. The engine must be shut down immediately - the continuation of the movement will lead to a spell!
📊 What color icons on your ŠKODA are more common?
  • Green
  • Yellow
  • Red
  • Blue
  • I don't pay attention

Standard icons: decoding for all models

These symbols are found on most cars. Škoda, from Fabia up to Kodiaq. We grouped them by systems:

Icon Description Actions
🚗! (exclamation mark in the car) Malfunction electronic stabilization system (ESC) Check the wheel sensors or drop the error through Settings → Service
🔋 (battery) Low voltage on-board network or generator malfunction Measure the voltage at the terminals (should be 13.8–14.4 V with the engine running)
🛑 ABS Denial brake-lock The brakes will work, but without ABS. Diagnosis required
💡 (light bulb) External lighting lamp (pass/far beam, stop lamp) has burned out Check all the lamps, including dimensions and fog lights
🔥 (water thermometer) Engine overheating Stop, turn off the engine, check the coolant level.

On models with diesel engine (for example, Octavia 2.0 TDI) a badge may appear 🛢️💧 This is a signal that you need to add AdBlue. If you ignore it, the car won’t start after the next ignition switch is off!

💡

On Škoda Enyaq and other electric cars 🔋⚡ With an exclamation point means a problem with a high-voltage battery. In this case, contact the service - self-repair is dangerous!

Specific badges for different ŠKODA models

Some symbols are unique to certain lines. For example:

  • 🚙 Octavia RS (sports version): Badge 🏁 — mode activated Sport (Throttle and steering settings are changed).
  • ⚡ Enyaq iV (electric): Indicator 🔌🔋 - charging from an external source. If it flashes, check the cable.
  • 🏔️ Kodiaq (crossover): Badge 🚙↗️ — mode enabled Off-Road (Increased clearance and differential locking).
  • 🛡️ Superb (flagship): Symbol 🛡️🚗 - activated system Predictive Cruise Control (Adaptive cruise with traffic signs).

On Škoda Scala and Kamiq may display 📱🚗 This means that the phone is connected to Apple CarPlay or Android Auto. If the symbol flashes, check the USB cable or smartphone settings.

What to do if the panel lit up the icon 🔧 (Wrench wrench)

This is a signal of the need for maintenance. On models with onboard computer (MAXI-DOT or Amundsen) you can see the remaining mileage to scheduled maintenance in the menu Service → Service intervals. If the symbol indicator is not reset after the TR, zeroing through a diagnostic scanner is required (for example, VCDS or ODB11).

How to reset icons on Škoda dashboard

Many warning signs (e.g., 🛢️ low level of oil or 🔧 - TR) can be dropped by yourself. The methods depend on the model:

  1. For Octavia A7/A8, Superb 3, Kodiaq:
    • 🔘 Press and hold the button 0.0/SET on the windshield wiper arm.
    • 🔘 Turn the key in position. ON (do not start the engine).
    • 🔘 Hold the button for 10 seconds until the display display is marked. Service reset.
  2. For Fabia 3, Rapid, Scala: 
    Menu → Settings → Service → Reset service interval
  3. For Enyaq (Electric car):
    • 🔘 Move to the Settings → Vehicle → Service.
    • 🔘 Choose. Resetting the service interval.
    • 🔘 Enter the PIN code (by default) 1234 or 0000).
⚠️ Attention: If after resetting the icon 🔧 appears again after a few kilometers, this may indicate mileage sensor malfunction Or an error in the control unit. Diagnostics required!

Make sure that the TR is actually done |

Use original consumables (oil, filters) |

Follow the instructions for your model |

Check if the indicator is dropped after restarting the engine.

Frequent Mistakes: Why Badges Burn for No Reason

Sometimes the indicators are falsely lit. Let’s look at typical situations:

  • 🌧️ After washing or rain: Badge 🚗! (ESC) may be caused by water entering the wheel sensors. Dry the car or drive 5-10 km - the error will disappear.
  • ❄️ At low temperatures: On diesel-powered Škoda (Octavia TDI, Superb TDI) may burn 🛢️💧 (AdBlue), although the tank is full. This is due to the crystallization of the liquid. Warm up the car in motion.
  • 🔌 After the battery is turned off: Several badges may catch fire (ABS, ⚠️, 🔋). It’s normal – the systems are rebooted. If the indicators are not extinguished after 1-2 engine start, check the fuses.
  • 🛠️ After repair: If you're replaced rain-sensor or headlightsmaybe 💡 (Lamp light) Calibration is required through diagnostic equipment.

On Škoda Enyaq and other electric vehicles false positives are often associated with charging problems. Like a badge. 🔌❌ It can occur when using uncertified cables or sockets without grounding.

💡

If the icon lights up periodically (for example, when cornering or braking), the problem is most likely in the case of a sensing Or oxidation of connectors. Check the wires for damage.

Diagnostics of icons: when to go to the service

Some indicators can be ignored (e.g., 🔄 Low level of washing agent, but there are symbols that service visit is mandatory:

Icon Possible reason Urgency
🔥🚗 (car with waves) Overheating of the engine or leakage of coolant ❗ Immediately
🛑⚠️ (exclamation mark in circle) Brake system failure (low fluid level or worn pads) ❗ Immediately
🛢️⚡ (Lightning oil) Problem with lubrication system (e.g. clogged oil filter) 🔶 Within 1-2 days
🔋❌ (Battery with a cross) Failure of the high-voltage battery (Enyaq, Octavia iV) 🔶 Within 1 day
🚪 (door open) A door or trunk is not tightly closed (or the end switch is defective) 🟡 At the earliest opportunity

If on your Škoda lit several icons at once (for example, ABS + ESC + 🔋), this may indicate flight-network problems (e.g. voltage surges or malfunction) control unit). In this case, it is not recommended to continue the movement - call a tow truck.

How to avoid problems: prevention and advice

To have badges on the dashboard Škoda Don’t be a surprise, follow these guidelines:

  • 📅 Follow the TA regulations: Change oil, filters and brake fluid according to service interval (each one) 15,000 km or once a year).
  • 🔋 Control the battery: Modern. Škoda with the system Start-Stop The battery lasts 3-4 years. Check the voltage once every six months.
  • 🛡️ Use the original consumables: Non-original lamps, sensors or AdBlue They can cause false alarms of indicators.
  • 📱 Update: On models with MIB3 (for example, Octavia 4, Enyaq) regularly update the system through Škoda Connect or dealer.

For owners Škoda with diesel engine It is especially important to monitor the level AdBlue. If icon 🛢️💧 It lights up at every launch, check:

  • Integrity of the tank and tubes (leakages are unacceptable!).
  • Quality of liquid (cannot be used) AdBlue with an expired expiration date).
  • Operation of the pump (on Octavia 1.6 TDI and Superb 2.0 TDI it often fails).
💡

On Škoda Kodiaq and Octavia Combi with the system Trailer Assist icon 🚛⚠️ It may burn due to improper setting of the trailer. Check the weight and coupling device according to the instructions.

FAQ: Frequent questions about ŠKODA badges

🔹 Why is the ŠKODA Octavia badge burning? 🛢️ (Oil), even though the butter is leveled?

This may be due to:

  • Malfunction oil pressure sensor (a common problem on Octavia A7 with engine 1.4 TSI).
  • Clogging oil filter Or oil nets.
  • Use of oil wrong-skinned (for example, 5W-30 instead of 5W-40).

Check the oil pressure with a pressure gauge. If it's normal (2–4 bar At idle speed, replace the sensor.

🔹 What does a flashing badge mean? 🔑 Škoda Superb?

This indicates:

  • The problem with the immobilizer (key is not recognized). Try restarting the engine with a different key.
  • Low battery charge keychain (replace by CR2032).
  • Control unit failure (requires flashing via VCDS).

If the car does not start, check the safety lock. F37 (10 A) in the block under the steering wheel.

🔹 How to turn off the icon 🚗⚠️ (ESC) on the Škoda Kamiq?

system ESC You can temporarily deactivate:

  1. Press and hold the button ESC Off (located near the CPT lever) during 3 seconds.
  2. The display will show ESC disabled.

⚠️ Turn it off. ESC only in emergency cases (for example, when towing or off-road driving). The system will automatically turn on the next engine start.

🔹 Why is the Škoda Enyaq badge burning? 🔋⚡ with an exclamation point?

This is a critical error of the high-voltage battery. Possible causes:

  • Damage power-cable (Check for cracks or meltings).
  • overheating or cell-balance Batteries (diagnosis is required at a certified center).
  • Crash in cooling system batteries (check the level of coolant in the circuit of the high-voltage system).

Actions: Stop immediately, turn off the ignition and call a tow truck. Keeping going is dangerous!

🔹 Can I drive if the ŠKODA Rapid is on fire? ABS?

Technically yes, but with caution:

  • The brakes will work, but lock-free The wheels can be blocked when braking sharply.
  • On a slippery road, the risk of drifting increases in 2–3 times.
  • Possible cause: malfunction ABS sensor One of the wheels or a wire break.

Check the fuse F41 (10A) and inspect the sensor wires for damage. If the problem is not resolved, contact the service.