ŠKODA Octavia A7 seats: features, configuration and secrets of comfort

In the European versions there was also a slack. Alcantara (in RS and Scout), which combined sporting style with increased wear resistance. It is important to note that even in one configuration there could be differences: for example, the seats with the electric drive (8- or 12-position) or with settings memory (optional Memory Package).

It is worth mentioning the sports seats in the Octavia RS: they had more pronounced lateral support, integrated headrests and logo vRS on the backs. However, their ergonomics weren't for everyone - some owners complained about not landing enough for tall drivers.

Seat adjustment: mechanics vs electrician

Seats in Octavia A7 They can be equipped with two types of adjustments: mechanical (lever under the seat) and electrical (buttons on the sidebar). Mechanics was found in basic versions, electrics in top ones. Let us consider the key features:

Mechanical adjustment is characterized by problems with longitudinal displacement Over time, the guides wear out, and the seat begins to “walk”. This is solved by replacing plastic bushings or the entire guide (article). 6Q0 881 101/102 for the driver's seat).

Electric seats are most often broken down back-inclination (article 1Z7 881 601) or control unit (article) 5E0 959 793). Before replacing, check the safety lock. F37 (10A) In the mounting unit - it is responsible for the power of the seats.

Check fuse F37 (10A)

Check the connectors under the seat for oxidation

Test each motor separately (voltage 12V)

Listen to sounds when working - creaking or crackling indicates mechanical wear-out.

Typical problems and their solutions

Even high-quality seats. Octavia A7 They need attention over time. Here are the most common complaints of owners and ways to resolve them:

• 🔧 Seat cushion sagging - characteristic of models with a run of 150,000 km. Reason: wear of a spring block or foam filler. Solution: replacement of filler (article) 6Q0 881 301) or the installation of additional orthopedic pads.
• 🔧 Creak when adjusting - usually caused by lack of lubrication in the guides or wear of plastic bushings. Solution: disassemble the mechanism, clean and lubricate LIQUI MOLY LM 50.
• 🔧 Creation of folds on leather upholstery - typical for Nappa with improper care. Solution: Use air conditioning for the skin (Skin)Leather Master) and avoid direct sunlight.
• 🔧 Heating does not work - most often burns out the thermal fuse in the pillow (article) 4D0 959 537). Less commonly, a break in the filaments of the heating element.

Important: in seats with ventilation function (optional) Climatronic Seat) often dust the ventilation ducts. To clean, use a vacuum cleaner with a narrow nozzle or compressed air.

⚠️ Warning: When replacing the seat upholstery, be sure to turn off the battery! In the cushions of the driver's and front passenger seats, pyropatrons of seatbelt pretensioners are installed, which can work when short circuit.

Seat care: materials and life hacks

Seat life Octavia A7 It's very much about care. Here are the key recommendations for different types of upholstery:

• 🧼 Fabric upholstery (Swing/Bolero):
  • Clean with a soft brush 1 time per month.
  • To remove stains, use Vanish or Autoglym Fabric Cleaner.
  • Avoid chlorine products – they destroy the structure of the tissue.
• 🧴 Leather upholstery (Nappa):
  • Wash with a wet microfiber with the addition Leather Care 1 time every 2 months.
  • To remove grease stains, use isopropyl alcohol (70%).
  • After cleaning, apply skin conditioning to prevent cracking.
• 🧽 Alcantara:
  • Clean only with a dry brush or special foam (Alcantara Cleaner).
  • Do not use water – the material absorbs moisture and deforms.
  • To remove odors, use ozonator.

Pay special attention seam That’s where the dirt gets the most. For their cleaning, a toothbrush with soft bristles and soap solution will suit. In case of severe contamination (for example, after children or animals) steam-cleaning, but only in the cabin - independent use of the steam generator can lead to wet filler and the appearance of mold.

Tuning and redesign of seats

Many owners Octavia A7 They want to improve the comfort or appearance of the seats. Here are the popular tuning options:

• 🔄 Upholstery replacement - for example, skin installation Nappa instead of the base tissue. The cost of a set for the front seats: from 45 000 rubles (with work).
• 🔄 Additional side support - relevant for Ambition and Stylewhere the backs do not fit the body properly. The overlays are used Sparco or Recaro.
• 🔄 Heating/ventilation installation In the basic versions, these options are not available. Heated kit (heated kit)6Q0 959 535) costs ~ 12 000 rubles, ventilation will cost 25 000 +.
• 🔄 Electrification of mechanical seats Possible by installing the sets from Webasto or Hella (from 30 000 rubles for one seat).

One of the most budgetary but effective upgrades orthopedic (for example, from Comfort Seat). They improve lumbar support and reduce fatigue at long distances. Cost: from 3 000 rubles per set.

For fans of sports style suitable seats from Octavia RS - they can be installed instead of standard (requires the revision of fasteners and electrical wiring). However, please note that sports seats are stiffer They may be less comfortable for daily use.

Replacement of seats: step-by-step instructions

If you need to remove or replace a seat (for example, for repairs or tuning), follow this algorithm. The work will take about 1 hour for one seat.

1. Disconnect the battery (required!) to avoid firing the squibs.
2. Move the seat as far back as possible and locate the two plastic clips on the front (under the trim).
3. Using a flat-blade screwdriver, carefully pry up the trim and remove it.
4. Unscrew the 4 bolts securing the guides (wrench T40).
5. Disconnect the wiring connectors under the seat (for electric seats there can be up to 5 of them!).
6. Lift the seat and slide it forward to release the guides.

When installing a new seat, make sure that:

• 🔩 All connectors are connected correctly (color markings must match).
• 🔩 The guides are clean and lubricated (use seat guide lubricant).
• 🔩 Bolts are tightened to torque 25 Nm (upholstery may deform the frame).

⚠️ Attention: if the light comes on after replacing the seat AIRBAG on the dashboard, you need to reset the error via a diagnostic scanner (for example, VCDS). It will not disappear on its own!

FAQ: answers to frequently asked questions