ŠKODA Octavia Tour seats: how to choose, adjust and extend service life

ŠKODA Octavia Tour It is not just a car, but a symbol of comfort for those who spend hours driving. And if the engine is the heart of the machine, the seats are the spine. Their ergonomics affect not only the convenience of the driver and passengers, but also safety on the road: an improper landing leads to rapid fatigue, back pain and even the risk of injuries in an accident.

In this article we will look at all aspects of seating Octavia Tour From factory materials and adjustments to the choice of covers and the solution of typical problems. You will learn how to properly adjust the seat to your height, what skin materials are better to choose for different climatic conditions, and why even premium heated seats require special care. And also, Let’s find out why in some of the packages Octavia Tour The seats wear out faster than in the basic versions..

1. Which seats are installed on ŠKODA Octavia Tour in 2026

Depending on the configuration and year of manufacture, Octavia Tour It can be equipped with three types of front seats:

• 🪑 Basic seats (cloth plating) "Cloth") - installed in versions Ambition and Active. They have a 6-step mechanical adjustment of height and longitudinal position, but lack lateral support.
• 🛋️ Sports seats (combination skinning) "Cloth/Alcantara" or "Leather/Alcantara") - available in Style and RS. They have enhanced lateral support, electric drive adjustment of the lumbar support and memory settings (in top versions).
• 💺 Premium seats (full skin) "Nappa" or "Vienna") - option L&K. Includes ventilation, massage function and heating with 3 levels of intensity.

Rear seats in all versions Octavia Tour They have a fixed angle of inclination, but in complete sets Style and above, adjust the backrest (40:20:40) and heating for external seats. Important: in the restyled models after 2022, there was an option electrical adjustment of the lumbar support For the front passenger, this is a rare decision in the classroom.

2. How to properly adjust the seat: step-by-step instructions

Incorrect seat adjustment is the main cause of back pain after long trips. Follow this algorithm:

1. Seat heightAdjust so that the hips are parallel to the floor and the knees are slightly above the level of the pelvis. Drivers who are less than 165 cm tall often forget to lift the seat, which causes them to lose their sight.
2. Backrest angle: ideal angle - 100-110°. Check simple: squeeze the clutch (or brake in automatic transmission) - the leg should remain slightly bent.
3. Longitudinal position: distance from the chest to the steering wheel - not less than 25 cm. The elbows shall touch the armrest at an angle of 90°.
4. Lumbar support: in electric seating (Style/L&K) adjust it so that the natural curvature of the spine is maintained. For mechanical versions, use a roller.

Special attention - headrest adjustment. Its upper edge should be at the level of the crown, not the neck! This is critical to protecting against whiplash in a crash. B Octavia Tour 2020+ headrests have 4 height positions and 2 angle positions.

⚠️ Attention: If you feel numbness in your legs after adjustment, check to see if the sciatic nerve is pinched. This often occurs when the seat is raised too high or the backrest is tilted too far.

3. Sheathing materials: pros and cons of each option

The choice of upholstery material affects not only tactile sensations, but also wear resistance, care and even the microclimate in the cabin. Let's consider all options for Octavia Tour:

Material	Pros	Cons	Service life
Cloth	Breathable, does not heat up in summer, cheap to repair	It collects dust, absorbs odors, and is difficult to clean from coffee/wine	5–7 years
Alcantara	Tactilely pleasant, wear-resistant, non-slip	Expensive, requires special cleaning products, is afraid of aggressive detergents	8–10 years
Leather (Vienna)	Premium look, easy to clean, durable	Heats up in the sun, can crack without care, expensive repairs	10+ years
Nappa (soft leather)	Maximum comfort, resistant to cracking	Sensitive to scratches, requires conditioner every 3 months	12+ years

An important nuance: in seats with combined upholstery (leather + Alcantara), the Alcantara side inserts most often wear out - their strength threshold is lower than that of leather with regular friction against clothing.

For hot climates we recommend fabric seats or perforated leather (optional Ventilated Seats). In cold regions, it is better to choose heated leather - it warms up faster and retains heat longer.

4. Common problems with seats Octavia Tour and how to solve them

Even in premium trim levels, owners are faced with major malfunctions. Here are the most common:

• 🔧 Creaking seats: occurs due to wear on plastic guides or loose fastenings. The solution is to lubricate the friction points with silicone grease (not WD-40!) or tighten the bolts under the seat.
• 🔥 Heating does not work: most often the fuse is to blame F37 (10A) or a break in the wiring under the seat. Check the voltage at the connector with a multimeter.
• 💺 Back sagging: typical for models before 2019 due to weak frame springs. The solution is to replace the spring block (article no. 6Q0881101).
• 🧹 Smell of mold: appears when moisture gets under the skin. It is necessary to remove the seat, dry the polyurethane foam filler and treat it with an antiseptic.

The problem with electric adjustments. B Octavia Tour 2017–2020 there was a defect in the backrest recline motor (article no. 5E0959701). Symptoms: The seat moves jerkily or is locked in one position. The solution is to replace the motor (cost ~8,000 rubles including labor).

⚠️ Attention: If after washing the interior the seat functions (heating, ventilation) stop working, immediately disconnect the battery! Water may have entered the control unit under the seat, causing a short circuit.

How to remove the seat for repair?

1. Disconnect the negative terminal of the battery. 2. Move the seat forward and unscrew the 4 mounting bolts (13 wrench). 3. Disconnect the wiring connectors (press the latches!). 4. For the rear seats, first remove the plastic plugs in the trunk.

5. Seat covers: which ones to choose and how not to damage the upholstery

Seat covers protect seats from wear and tear, but the wrong choice can make problems worse. For example, thick covers made of non-breathable materials provoke condensation under the covering, which leads to mold.

Recommendations for selection:

• 🧵 For fabric seats: covers from microfiber or neoprene (thickness 2–3 mm). They are not electrified and do not slip.
• 🐄 For leather seats: only covers with perforation and inner lining made of cotton. Avoid PVC - it blocks ventilation.
• 🏎️ For sports seats (with side support): covers with elastic inserts on the sides, for example, from Covercraft or WeatherTech.

Important: covers must be precise landing for your model. Universal options slip and rub the skin. For Octavia Tour Suitable cases marked:

• 📌 SKODA Octavia 3 Tour (5E) 2017–2026 — for restyled models;
• 📌 SKODA Octavia Combi (5E) 2013–2016 - for dorestayla.

The cost of high-quality cases is from 5,000 to 15,000 rubles per set. It's not worth saving: cheap polyester covers lead to premature wear of the side rollers seats due to friction.

6. Seat care: professional products and life hacks

Regular care extends the life of seats by 30–40%. Here are proven schemes for different materials:

🧼 Fabric seats (Cloth)

• 🧽 Weekly: vacuum cleaner with cloth attachment + damp microfiber with diluted product Autoglym Interior Shampoo (1:10).
• 🩹 For stains: foam cleaner Turtle Wax Upholstery Cleaner — apply for 5 minutes, then remove with a brush.
• 🚫 Prohibited: bleaches, chlorine-containing products, hard brushes.

🐄 Leather seats (Vienna/Nappa)

• 🧴 Every 2 weeks: cleaning with a damp microfiber cloth + conditioner Leather Honey (apply in a circular motion).
• ☀️ Summer: use UV protection 303 Aerospace Protectant once a month.
• ❄️ in winter: Avoid heating the interior above 22°C - overdried leather will crack.

For Alcantara Only dry cleaning with a soft bristle brush or a special spray is suitable. Alcantara Cleaner. No water! This material is afraid of getting wet and loses its texture.

Lifehack for removing odors: place bags of activated carbon under the seats or use a cabin ozonizer (rent ~500 rubles/day). This will remove even the persistent smell of tobacco or animals.

7. Upgrading seats: what can be improved

Even in top trim levels Octavia Tour there is something to improve. Here are the popular upgrades:

• 🔌 Additional USB port in the armrest (item no. 5E0035710) - for charging passenger gadgets.
• 💺 Adjustable headrest for rear seats (optional 6X0881101) - improves the comfort of passengers taller than 180 cm.
• 🔥 Wireless charging in the armrest (set Skoda Wireless Charging) - compatible with 2020+ models.
• 🛡️ Protective door sills (article 5E6858501) - prevent scratches during landing.

The most popular upgrade is installation seat ventilation in basic configurations. To do this you will need:

1. Fan kit (item no. 5E0881501);
2. Control unit with button (article no. 5E0959750);
3. Perforated seat covers (to order from an official dealer).

The cost of the work starts from 25,000 rubles, but the result justifies the investment: in hot weather, the seats remain cool even without air conditioning.

FAQ: Frequently asked questions about seats ŠKODA Octavia Tour

❓ Can a child seat be installed in the front seat? Octavia Tour?

Yes, but only when disabled airbag (switch on the end of the glove box). Otherwise, in the event of an accident, the airbag may injure the child. Also check that the seat back is reclined no more than 30° - otherwise the chair will not lock correctly.

❓ Why do leather seats become hard in cold weather?

This is a normal property of natural leather - at low temperatures it loses its elasticity. To avoid cracks, before the trip, warm up the interior to +10°C, and then turn the heated seats to level 1. Do not use a hair dryer or heater - sudden heat will damage your skin.

❓ How to remove creases from leather seats after a long period of parking?

Creases appear due to uneven distribution of load. To eliminate them:

1. Warm up the interior to 20–22°C.
2. Apply leather conditioner to the area (Leatherique Rejuvenator).
3. Gently smooth the skin with a soft cloth in a circular motion.
4. Let it soak in for 2-3 hours, then remove excess with a dry cloth.

If the crease is deep, repeat the procedure 2-3 times at intervals of 24 hours.

❓ Which seats are better for taxis: fabric or leather?

Optimal for taxi combined cladding (fabric + artificial leather Vinyl). It combines wear resistance and ease of maintenance. Genuine leather in a taxi wears out within 2–3 years due to constant friction, and clean fabric quickly gets dirty. An alternative is fabric seats with protective covers made of cordura (material used in aviation).

❓ Why did the seats begin to creak after washing the interior?

Creaking occurs due to moisture entering:

• Plastic seat guides;
• Height adjustment mechanism;
• Spring block (if water has leaked under the casing).

Solution: Blow dry the seats for 15-20 minutes, then treat the rails silicone grease (not lithol!). If the squeak remains, disassemble the seat and dry the polyurethane foam filling.