Removing the head restraints Ε KODA Kodiaq - the task faced by owners when transporting oversized cargo, cleaning the cabin or replacing covers. Despite the apparent simplicity, the process has nuances: from the fixers of different generations of the model to the risk of damage to the adjustment mechanism. In this article, we will understand Step-by-step instructions for front and rear seatsWe will list the necessary tools and warn you about typical errors.

Headrests Kodiaq (especially in configurations Style and Sportline) are equipped with improved locks which require careful handling. For example, on models since 2021, the design of the lock button has changed – this affects the dismantling algorithm. We have taken into account all modifications, including facelift versions of 2023-2026 with electric seat drivewhere the head restraints are integrated into the position memory system.

When do you need to remove the head restraints?

The reasons for dismantling vary from domestic to technical:

  • πŸš› Transportation of long cargo (skis, boards, furniture) - without removing head restraints, the luggage space loses up to 15 cm in height.
  • 🧼 Deep interior cleaning: Stains on the fabric or skin of head restraints are difficult to remove without complete removal.
  • πŸ”§ Replacement of covers or repair (for example, after an accident or wear of the adjustment mechanism).
  • πŸ”„ Modernization: installing heating, ventilation or multimedia displays in the head restraints.

In the back row Kodiaq Headrests are often removed for the installation of child seats with a system ISOFIX Some mounting models require free space between the back and the head restraint. Important: on the third row seats (in 7-seat versions), head restraints have reinforced spring Destroying them requires a lot of effort.

πŸ“Š Why did you shoot headrests on the Kodiaq?
  • Cargo transportation
  • Interior cleaning
  • Replacing covers
  • Repair/modernization
  • Other

Tools and preparation

A minimum set of:

  • πŸ”§ Flat head screwdriver (for the use of decorative stubs on the buttons of the fixers).
  • 🧲 Magnetic holder (Not to lose any small springs or washers during disassembly).
  • πŸ“Έ Smartphone Take a picture of the position of the head restraints before removing, especially if you have a model with the head restraints. memory-driven.
  • 🧴 Silicone grease (for example, WD-40 Specialist) - useful if the fixers are acidified.

Before starting work:

  1. Lower the seat to the lowest position (for front head restraints).
  2. Make sure the car is on a flat surface – this will prevent the seats from moving spontaneously.
  3. Turn off the power (remove the battery terminal) if you plan to work with electric drives.
πŸ’‘

On models Kodiaq 2020+ with function Massage Before removing the head restraints, be sure to deactivate it through the menu. COMFORT β†’ Seats. Otherwise, you risk damaging the heating wires.

Removal of front head restraints

The algorithm for the driver and passenger seats is identical, but there are nuances for versions with the driver’s seat. electric drive:

  1. Find the lock button. - it is located at the base of the head restraint (in some models hidden under a plastic cap).
  2. Press and hold the buttonAt the same time, pulling the headrest up. If it doesn’t give in, don’t put too much effort into it – it may have jammed the mechanism.
  3. For models with position-memory After removing, reset the settings through the menu CAR β†’ Seat settings β†’ Reset.

On restyled Kodiaq (2023+) The lock button may be sensory - to activate it requires pressing with a force of 3-5 kg. If the head restraint is not removed:

  • Check if it is blocked by the system. Anti-Theft (In some European versions).
  • Treat the joint of the headrest and back with silicone lubrication, wait 5-10 minutes and try again.
What to do if the release button is broken?

If the button is recessed or not fixed, the plastic guide is likely to have broken. In this case, you will need to disassemble the seat back. For this:

1. Remove the plastic linings on the sides of the back (they are attached to the latches).

2. Unscrew 4 bolts under the T25 torso, holding the skin.

3. Remove the locking mechanism and replace it (the original part article: 5E0 881 101 for left-hand models).

Model year Latch type Removal Features
2017–2020 Mechanical (button) It takes 2-3 kg to press. Risk of jamming in corrosion.
2021–2022 Mechanical (reinforced spring) The button is deeper. You might need a screwdriver to do the smacking.
2023–2026 Sensory/electronic The push must be sharp. If a failure is necessary diagnosis through OBD-II.

Removal of rear head restraints

Rear head restraints Kodiaq It is easier to shoot, but it is important to consider seat design:

  • πŸͺ‘ On second row The locks are similar to the front, but the button is located on the side (from the door).
  • πŸš— On third-row (in 7-seat versions) head restraints are attached to the pointer without buttons - they just need to pull up with a force of 5-7 kg.

Features:

  • On the seats with ISOFIX Before removing the head restraint, check whether the child seat attachments interfere.
  • If the headrest is not removed, do not try it. rock - it could damage the guides. Instead, treat the joint with penetrating lubricant.

Remove the back of the second row (if access to the third is required)

Check for child seats or luggage on the seats

Photograph the position of the head restraints (for models with electric drive)

Prepare a rag (possible lubrication drips)->

Common mistakes and how to avoid them

Even experienced car owners make mistakes that lead to breakdowns:

⚠️ Attention: On models with air-suspension (optional Dynamic Chassis Control) do not remove the head restraints when the ignition is engaged. This can cause system calibration failure and error P1650 in the control unit.

Common problems:

  • πŸ”§ Disruption of guide carvings - occurs when trying to pull the head restraint without pressing the lock. The repairs will cost 8-12 thousand. rub. (Replacement of the guide + work).
  • ⚑ Short circuit If you do not turn off the battery before working with electric drives. Especially relevant for versions of C seat ventilation.
  • πŸ”„ Resetting memory settings - after removing the head restraints on models with Memory Package Reconfiguration of seat positions may be required.

To avoid errors:

  1. Always check, shutdown Anti-Theft (In some European versions, it blocks the removal of head restraints).
  2. Do not use metal tools to press the lock - this will scratch the plastic. It is better to use a plastic spatula.
  3. If the headrest is not removed after 3-4 attempts, contact the service. Forced pulling can damage gas shock absorbers seat backs.
πŸ’‘

On models Kodiaq RS Sports seats with head restraints integrated into the system Active Headrest. Removal of the device without a special tool (article) VAS 6430/3) may cause the airbags to act!

Reinstalling the head restraints

Installation is performed in reverse order, but there are key points:

  1. Make sure rack guides The headrest is clean and not bent. If necessary, wipe them with alcohol.
  2. For models with electric drive before installation, turn on the ignition and wait for the initialization of the system (on the display a message will appear). "Seat Calibration").
  3. Press the head restraint to the characteristic click This is a signal that the fixator is activated.

After installation:

  • Check your work heating/ventilation (if any).
  • For versions with Memory Package Keep the new seat positions.
  • If there is an error on the dashboard (for example, "Seat Fault"), reset through a diagnostic scanner.
⚠️ Attention: On Kodiaq with the system Travel Assist (adaptive cruise control) improperly installed head restraint can block the operation of sensors. After installation, check if the green system indicator on the dashboard is on.

FAQ: Frequently asked questions

Can you remove headrests on a Kodiaq without tools?

Yes, on most models, it is enough to press the lock and pull the headrest up. However, for versions of touch buttons (2023+) may require a flat screwdriver to fit the plug. In the third row of seats, tools are not needed - the headrests simply stretch out.

Why does the headrest not come off even after pressing the button?

There are several reasons:

  • Acidification of the mechanism (solution: to process) WD-40 and wait 10 minutes.
  • The lockdown worked. Anti-Theft (Switch off via a menu or diagnostic scanner).
  • The guide post is bent (requires disassembly of the seat back).

If the headrest does not respond after 3-4 attempts, do not apply force - contact the service.

Do I need to reset the settings after removing the head restraints?

Only for models with seat-holding (optional Memory Package). After the head restraints are reset:

  1. Sit in the seat and adjust it to suit you.
  2. Click the button M Hold the door panel for 3 seconds until the signal sounds.

For versions without memory, reset is not required.

Can removed headrests be washed in the washing machine?

No! This will lead to:

  • Deformations of polyurethane foam filler.
  • Damage heating elements (if there is heating).
  • Corrosion of metal parts of the fixer.

Recommended cleaning method: salon foam (for example, Sonax Xtreme) + soft brush. For leather head restraints, use Leather Care from Gyeon.

What to do if after installing the head restraint, an error on the instrumentation burns?

Mistake (e.g., "Seat Fault" or "Airbag Error") occurs if:

  • The locker did not work (try to remove and install the headrest again).
  • The heating/ventilation connector is damaged (diagnosis is needed).
  • System calibration has failed Travel Assist (reset via OBD-II).

If the error does not disappear, contact the service to read the codes of malfunctions.