Many crossover owners Skoda Kodiaq thinking about how to make your car more sporty and aggressive. One of the most affordable and effective modifications to the appearance is the installation spoiler on the roof or the back window. This element not only changes the aesthetics, but can also affect the behavior of the machine at high speed, reducing lift.
In modern autotuning, there is a huge choice of solutions: from strict factory kits to bright aerodynamic packages from third-party manufacturers. It is important to understand that aerodynamics The crossover has its own characteristics, and the wrong choice of part can lead to the opposite effect - an increase in noise and fuel consumption. In this article, we will analyze all the nuances of choosing and installing a spoiler for the model. Kodiaq.
Types of spoilers for Skoda Kodiaq: from factory to custom tuning
Before you start buying, you need to decide on the type of element. Factory spoiler from Skoda (or its equivalent from RS versions) are usually in body colour and have a restrained design. Such parts fit perfectly into the lines of the body and often have a flow to improve the flow of air.
On the other hand, the market offers a lot of alternative options made of fiberglass, ABS plastic or even carbon fiber. Carbon fiber elements look the most impressive, but their cost is much higher than plastic counterparts. Fiberglass It is the middle ground in terms of price and quality, as it is resistant to vibrations and does not crack at temperature changes.
- π Factory style: ideal for preserving the premium look of the car.
- π§ Sports tuning: aggressive forms, often black or with imitation of carbon.
- βοΈ Universal solutions: require fitting, but are cheaper than the original parts.
Choosing between a black glossy coating and "under metal", remember that glossy details on the roof Kodiaq They may be too expensive and require frequent cleaning.
β οΈ Attention! When buying a fiberglass spoiler, be sure to check it for microcracks and chips, as this material is fragile when transported incorrectly.
The influence of the aerodynamic element on the characteristics of the car
Many owners mistakenly believe that a spoiler is a decorative element. In fact, it's properly designed. aerodynamic body kit It changes the air flow over the roof. For a heavy crossover, sort of. Skoda Kodiaq This can be important when overtaking on the track.
The spoiler creates downforce that βgluesβ the rear of the car to the road. This increases the stability of the control, especially in cornering at high speed. However, if the part is set at the wrong angle, it can work like a sail, creating additional drag.
Experiments show that a poor-quality spoiler can increase fuel consumption by 0.5-1 liters per 100 km due to the increased coefficient of aerodynamic drag. Therefore geometry The details should be as close as possible to the calculation for this model.
- Yeah, significantly.
- Yeah, slightly.
- No, it's a myth
- I don't know
The impact on cabin noise is also worth considering. Some spoiler models start to whistle at speeds above 110 km/h, which can irritate the driver and passengers. Check the availability of special rubber seals in the kit.
β οΈ Attention! Do not install spoilers on the roof if you plan to use them. Skoda Kodiaq as a family car with child car seats β they can interfere with the view or hurt when opening the trunk.
Preparing for installation: tools and necessary materials
Spoiler installation is a task that can be handled on your own if you have basic tools skills. You will need a clean, flat space, preferably in a garage or in a closed parking lot, to avoid dust getting on the glue.
To work, you will need a set of wrenches, screwdrivers (cross and flat), degreaser (for example, alcohol or a special solution for cars), paint scotch and, of course, himself. spoiler. If you plan to attach the part to the screws, you will need a drill and sealant to protect against corrosion.
- π οΈ A set of screwdrivers and keys for dismantling the standard fasteners (if any).
- π§Ό Degreasing and rags for the perfect cleaning of the roof surface.
- π Roulette and paint tape for accurate marking of the position of the part.
Before starting work, be sure to read the manufacturer's instructions. Some spoilers are only attached to double sided tapeOthers require drilling holes in the roof. For the model Kodiaq Combined mounting options are often found.
βοΈ Preparing to install the spoiler
β οΈ Attention! If you choose a drilling method, make sure there are no hidden amplifiers or electrical wires under the roof that could be damaged by the drill.
Step-by-step instructions for installing a spoiler
The installation process begins with careful preparation of the surface. The roof Skoda Kodiaq You need to wash and dry, and then treat with a degreasing agent. This is a critical step, since the reliability of glue or tape clutch depends on the purity.
Put a spoiler on the roof and align it in the center. Use paint tape to fix the part in the desired position and make markings at the edges. If the mount is screwed, drill holes strictly according to the marking, using a drill with a diameter corresponding to the bolts.
Apply a layer of sealant into the holes (if any) and install a spoiler. Hold it tightly and secure it with screws with washers. If only glue is used, remove the protective film from the tape and, holding the part, press it with force.
For reliable adhesion to the surface, it is recommended to use a special acrylic tape It's about 2 mm thick. It compensates for the micro-nervousness of the roof and ensures the durability of the attachment.
Common installation mistakes
Applying glue to a dirty surface, uneven pressure when glued, ignoring the temperature regime (the glue does not catch at a temperature below +10 Β° C).
After installation, do not open the trunk or wash the car for 24 hours to allow the glue to be fully polymerized. This will ensure maximum strength of the fixation.
The quality of the roof surface and proper markings are the guarantee that the spoiler will not peel off after the first wash or trip along the track.
Comparison table for spoiler mounting types
To make it easier for you to choose the right option, we have compiled a comparative table of the main fastening methods used for Skoda Kodiaq. This will help to assess the complexity of the installation and the need for intervention in the design of the body.
| Mounting type | Difficulty of installation | Drilling required | Reliability | Service life |
|---|---|---|---|---|
| Double sided tape | Low | No | Average | 5-7 years |
| Sealed screws | High | Yes | High | More than 10 years |
| Studs in regular seats | Average | No (if there are seats) | High | More than 10 years |
| Magnetic mount | Low | No | Low | 1-2 years |
Please note that magnetic mounting is only suitable for temporary use or exhibition exposures. for daily use on Kodiaq It is not suitable due to the risk of failure of the part in high winds.
Before drilling holes in the roof, buy special rubber plugs or rings so that water does not get inside the metal and does not cause corrosion.
Spoiler care and damage prevention
After installation, the spoiler requires special care. When washing your car, do not direct a jet of high-pressure water directly into the junction between the spoiler and the roof. This can destroy the glue layer and lead to the tearing off of the part.
Check the condition of the mounts regularly. If you notice that the spoiler began to "walk" or appeared creaking when moving, you urgently need to tighten the screws or replace the tape. Ignoring such signs can lead to the fact that the part will fly off on the go, creating an emergency situation.
To clean the spoiler, use soft sponges and special shampoos for the body. Abrasives can scratch the paintwork or polish, especially if the part is made of plastic or carbon dioxide.
- πΏ Wash: Avoid high pressure jets at the joint site.
- π Check the mounts once a month.
- 𧴠Care: Use only soft car shampoos without wax at the joints.
If the spoiler has started to lose color or cracks appear on it, do not postpone repairs. Plastic in the sun burns out and becomes brittle, which reduces its aerodynamic properties.
Legal aspects and technical requirements
In some countries, this requires coordination with the traffic police or other supervisory authorities. Illegal installation can cause refusal to pass the inspection.
For Skoda Kodiaq RS spoilers or accessories from official dealers do not usually require additional permits, as they are certified by the manufacturer. However, custom details may raise questions from inspectors.
Before buying, check with the seller whether this part is certified for your region. Make sure that it does not violate the overall dimensions of the car and does not cover the rear view view.
What does the law say?
In Russia, the introduction of changes in the design requires registration with the traffic police. Installation of uncertified items can result in a fine and a requirement to dismantle the part.
β οΈ Attention! Install only those spoilers that have a certificate of conformity to avoid problems during the technical inspection and traffic police checks.
Ignoring these rules can lead not only to fines, but also to problems with insurance in the event of an accident, if the examination establishes a link between the accident and improper installation of aerodynamic elements.
Frequently Asked Questions
Do I need to drill the roof of the Skoda Kodiaq to install a spoiler?
It depends on the type of spoiler selected. Factory options and high-quality tuning sets often use regular mounting places or powerful bilateral tape. Drilling is required only for universal models not specifically designed for this brand.
Does the spoiler affect the work of parktronics?
Usually not if the spoiler is installed correctly and does not overlap the parking sensors. However, some models with backlighting or complex shapes can create false positives if they are too close to the sensors.
Can I install a spoiler on Kodiaq with rails?
Yes, there are special models of spoilers that are attached to or integrated with the rails. However, this can increase the height of the car and limit the use of the roof trunk.
How long does it take to install a spoiler?
With all the tools and experience, the process takes 1 to 2 hours. If you do it for the first time and require drilling, the time will take more - about 3-4 hours, taking into account the preparation and drying of the sealant.
Can the spoiler be painted to match the body color?
Yes, most plastic and fiberglass spoilers can be painted. Use soil for plastic and car enamel to keep the color long and do not burn out in the sun.
So, setting up a spoiler on Skoda Kodiaq It is a great way to emphasize the individuality of the car and slightly improve its aerodynamics. The main thing is to choose a quality part, install it correctly and follow the rules of operation. Choosing the right spoiler ensures that your crossover will look aggressive without losing comfort and reliability. By following our tips, you can avoid common mistakes and enjoy the results for years to come.