Spoiler on ŠKODA Rapid 2019 is not just a tuning element, but a functional solution that improves aerodynamics, gives the car a sporty look and can even reduce fuel consumption at high speeds. Owners of this model are often faced with the question: which spoiler to choose, so that it fits harmoniously into the design, does not worsen visibility and lasts for many years? In this article, we will analyze all the nuances - from spoiler types to step-by-step installation instructions, as well as tell about common mistakes that beginners make.

Models Rapid 2019 (in the hatchback and liftback) have their own features of mounting the rear spoiler. For example, on the hatchback it is mounted on the trunk lid, and on the elevatorback - on the upper edge of the rear window. This affects the choice of components, and the installation technology. We analyzed the feedback of owners, the technical characteristics of popular models of spoilers and compiled a checklist that will help avoid typical problems during tuning.

Spoiler Types for the ŠKODA Rapid 2019: Which one to choose?

There are three main types of spoilers on the market that are suitable for Rapid 2019:

  • 🔹 Factory (OEM) - original parts from ŠKODAwhich are installed on the sports versions (for example, Rapid Monte Carlo). They are ideal for fastenings, but are more expensive than analogues.
  • 🔹 Universal - suitable for most hatchbacks and liftbacks, but require reworking of mounts. They are often made from ABS plastic or fiberglass.
  • 🔹 Sports (aftermarket) - aggressive design, with additional ducts or wings. Popular brands Maxton Design, Eibach and Kamei.

When choosing, pay attention to material:

  • 🔸 ABS plastic - light, resistant to corrosion, but can crack in severe frosts.
  • 🔸 Fiberglass Stronger than plastic, but heavier and requires painting.
  • 🔸 Carbon - premium option, light and durable, but expensive and fragile when hit.

For Rapid 2019 is the most popular spoilers from Maxton Design (model MD-SK-RAPID-19) and Eibach (series Pro-Spoiler). They come with fastening kits and instructions, which makes installation easier. However, universal spoilers (for example, from Kamei) may require drilling additional holes in the body – this is worth considering if you are not ready for the modification of the car.

📊 Which spoiler would you prefer for your 2019 Rapid?
  • Factory (OEM)
  • Universal ABS
  • Sports carbon
  • Another option

Which spoiler is suitable for hatchback and liftback: key differences

Body structure ŠKODA Rapid 2019 affects the choice of spoiler:

  • 🚗 Hatchback - spoiler is attached to the trunk lid. Here it is important that he does not block the view through the rear window and does not interfere with the work of the janitor. Popular models: Maxton Design Rear Spoiler (code SK19-RAP-HB) and ŠKODA OEM (article 5E6-071-601).
  • 🚗 Liftback - spoiler is installed on the edge of the roof, above the rear window. More massive models will be suitable, for example. Eibach Pro-Spoiler (article E10-40-001-01-22).

Important nuance: on the elevatorback, the spoiler should not act beyond the dimensions of the car more than on the other side. 50 mmOtherwise, it can lead to problems when passing the inspection. Also make sure that the mounts do not match the lines. heated rear window - this is fraught with a short circuit.

Body type Recommended spoiler model Article Average price, rubles
Hatchback Maxton Design Rear Spoiler SK19-RAP-HB 12 000 — 15 000
Hatchback ŠKODA OEM (original) 5E6-071-601 18 000 — 22 000
Liftback Eibach Pro-Spoiler E10-40-001-01-22 16 000 — 19 000
Liftback Kamei High Spoiler KS-19-RAP-LB 9 000 — 11 000

If you choose a spoiler for Rapid Monte Carlo, pay attention to the model ŠKODA OEM with article number 5E6-071-601-AA - it has a black edging and perfectly combines with the factory body kit of this version. For other modifications, universal options will be suitable, but they will have to be painted in body color.

💡

Before buying a spoiler, check its compatibility with your modification. Rapid VIN code. Some models may not be suitable due to differences in the shape of the trunk lid (for example, for versions with a panoramic roof).

Step by step instructions for installing a spoiler at the ŠKODA Rapid 2019

Spoiler installation is a process that can be performed on your own if you follow the instructions and take your time. You'll need:

  • 🔧 Set of screwdrivers (phillips, flat).
  • 🔧 A drill with a set of drills (if you need to finalize the fasteners).
  • 🔧 Car sealant (eg 3M Automotive Sealant).
  • 🔧 Paint tape and alcohol for surface degreasing.

If a spoiler needs painting, do it. before installation. Use automotive enamel in a can (for example, Motip or Dupli-Color) and a primer for plastic. After painting, let the details dry at least 24 hours.

☑️ Preparing to install the spoiler

Done: 0 / 4

Installation algorithm:

  1. Attach a spoiler to the trunk lid and mark the mounting places with paint tape.
  2. If you need to drill, use a drill with a diameter 3–4 mm (The exact size is specified in the spoiler instructions).
  3. Apply the sealant to the spoiler's sealing gum and press it against the body.
  4. Secure the spoiler with screws or bolts (go in the kit). Tighten them up. diagonallyto avoid skew.
  5. Remove excess sealant and let it dry (usually) 4–6 hours).

For models with heated rear window It's important not to damage the wiring. Before drilling, check the location of the wires using multimeter in vertebrae mode. If you are not sure, go to the car service.

What to do if the spoiler does not fit tightly?

If there are gaps after installation, the cause may be curvature of the body or defect spoiler. In the first case, the adjustment of the fasteners will help, in the second - the replacement of the part. You can also use double-sided tape. 3M VHB For additional fixation, but this is a temporary solution.

Common installation mistakes and how to avoid them

Even experienced car owners sometimes make mistakes that lead to spoiler issues. Here are the most frequent of them:

  • ❌ Incorrect drilling If the holes are not made according to the pattern, the spoiler will be skewed. Use the stencil that comes with the kit.
  • ❌ Saving on sealant Without it, water will penetrate the spoiler, causing corrosion. Put on a sealant. thin layer around the entire perimeter.
  • ❌ Ignoring painting An unpainted spoiler made of ABS plastic will quickly lose its appearance under the influence of UV rays.

Another typical problem is spoiler vibration at high speeds. This is due to weak fixation or incorrectly selected fasteners. If the spoiler starts to walk at a higher speed 120 km/h, check:

  • 🔩 Do they all have a slew of sleeves (sometimes they get weaker over time)?
  • 🔩 Is there a backlash in the places of attachment to the body?
  • 🔩 Has the sealing gum not deformed (it can be replaced with a new one).
💡

If the spoiler starts vibrating, don’t ignore the problem – it can cause it to break away at high speed. It is better to immediately tighten the mounts or use additional fixtures (for example, glue). Loctite).

Also the owners Rapid sometimes they complain about wind whistle after the spoiler was installed. This is due to a violation of aerodynamics. The solution is to establish wind deflector (for example, from ClimAir) or adjust the spoiler angle.

Maintenance and care of a spoiler: how to extend its service life

The spoiler, like any external element of the car, requires maintenance. Basic rules:

  • 🧼 Washing Use a soft sponge and car shampoo (for example, Karcher). Do not use abrasives - they will scratch the surface.
  • 🎨 Polishing - once every 3–4 months apply protective polymer (for example, Sonax) to prevent the paint from burning out.
  • 🛠️ Checking fasteners - once every six months, tighten the bolts and inspect the sealant for cracks.

In winter, pay special attention icing spoiler. The ice can damage the mounts or the part itself. To avoid this:

  • ❄️ After washing, thoroughly dry the spoiler (you can use a hairdryer).
  • ❄️ In the cold, treat it. anti-icing spray (for example, Liqui Moly Anti-Ice).

If a spoiler is carbonAvoid high pressure washing – this can lead to material stratification. It is better to use these models for handwash microfiber.

💡

After rain or washing, check if the water is accumulating under the spoiler. If you notice moisture, remove it and apply a new layer of sealant.

Should you install a spoiler for the ŠKODA Rapid 2019: pros and cons

Before deciding on the installation, weigh the pros and cons:

Pros Cons
✅ Improved aerodynamics (reduced lift at high speeds). ❌ Increased fuel consumption by 0.2–0.5 l/100 km due to the extra weight.
✅ Sporty appearance. ❌ Possible problems with visibility (relevant for high-end models).
✅ Protecting the back window from dirt and insects. ❌ Risk of corrosion if installed incorrectly.
✅ Increase in the residual value of the car (with high-quality installation). ❌ Additional costs for painting and installation.

If you drive mainly in the city, the spoiler is unlikely to bring practical benefits - its main advantage is manifested at speeds higher than the previous one. 100 km/h. However, for fans of tuning, it will be an excellent visual accent.

Important: spoiler can affect the warranty of the car, if its installation has caused drilling of the body or damage to the wiring. Before installation, check this point with the official dealer ŠKODA.

Where to buy a spoiler for ŠKODA Rapid 2019: a review of verified sellers

You can buy a spoiler in several places:

  • 🏬 Official dealers ŠKODA Here you will find original details, but prices will be higher than the market price. 20–30%.
  • 🛒 Online stores:
    • Exist.ru - wide range, often with discounts.
    • Autodoc.ru — convenient selection by VIN code.
    • Kufar.by (for buyers from Belarus) - you can find used options.
  • 🔧 Car disassembly - They sell spoilers from the dead here. Rapid Monte Carlo at a price of 2–3 times cheaper new.

When purchasing, pay attention to:

  • 📄 Availability certificate of conformity (especially for carbon models).
  • 📦 Full equipment (mounting, seals, instructions).
  • 🎨 The ability to paint to match the color of your car (many stores offer this service).

Average prices for spoilers for Rapid 2019:

  • 💰 Original (ŠKODA OEM) — 18 000 — 25 000 ₽.
  • 💰 Universal (ABS plastic) 8 000 — 15 000 ₽.
  • 💰 Carboniferous 25 000 — 40 000 ₽.
  • 💰 Used from disassembly - 5 000 — 10 000 ₽.
💡

Before buying a spoiler from disassembly, be sure to check it for cracks and repair marks. Carbon fiber parts are often restored after an accident, but such a "repair" product will not last long.

FAQ: Frequent questions about spoilers at ŠKODA Rapid 2019

Do I need to register a spoiler with the traffic police?

If the spoiler does not change the dimensions of the car (does not act more than on the 50 mm outside the body) and has no lighting elements, registration is not required. However, when passing the inspection, the inspector may ask to present certificate of conformity detail.

Is it possible to install a spoiler from Rapid Monte Carlo to the regular version?

Yes, spoiler from Monte Carlo (article 5E6-071-601-AA) suitable for all hatchbacks Rapid 2019. However, it will have to be painted in the color of your car, as the original part comes with a black edging.

What glue to use to fix the spoiler, if you do not want to drill the body?

For drillless installation, double-sided scotch is suitable 3M VHB or glue SikaFlex-252. However, this method is less reliable: the spoiler can fall off in a strong wind or on the sink. We recommend combining adhesive with mechanical fastening (at least in 2-3 points).

Does the spoiler reduce fuel consumption?

Theoretically, yes, but the effect is minimal. At higher speeds 100 km/h spoiler reduces lift, which can save up to 0.1–0.3 l/100 km. You won't notice the difference in town.

Can I paint the spoiler with a can of my own?

Yes, but for quality results, follow the instructions:

  1. Degrease the surface antisilicon.
  2. Apply a plastic primer (eg Body 960).
  3. Paint in 2-3 layers at intervals 15 minutes.
  4. Coat with varnish to protect against UV rays.

For complex colors (e.g., metallic) it is better to turn to professionals.