Top glove box for ŠKODA Kodiaq - it is not just an accessory, but a useful addition that helps to rationally use the cabin space. Owners of this crossover often face a shortage of places to store small things: glasses, documents, phone or keys. Standard compartments in Kodiaq It is not always convenient, especially if children are driving in the car or large items are often transported.

Installing the top glove compartment solves this problem by adding an additional closed compartment above the center console. However, not all models are suitable for Kodiaq - it is important to choose an accessory that will not interfere with the review, will not violate the ergonomics of the cabin and will last for many years. In this article, we will discuss how to choose and install the upper glove compartment correctly, avoiding typical mistakes.

Why do you need a glove compartment in the ŠKODA Kodiaq?

Salon ŠKODA Kodiaq It is famous for its spaciousness, but even here there are nuances. For example, a standard glove compartment in front of a passenger is not always convenient for the driver, and open pockets on doors or armrests do not protect things from falling out. The upper glove compartment solves several tasks:

  • 🔑 Quick access Small things without having to bend over or distract from the road.
  • 👓 Sun protectionIf the glove compartment is mounted above the console, it prevents the plastic and electronics from heating.
  • 🧩 Additional space for documents, masks, antiseptics or chargers.
  • 🚗 Keeping cleanA closed compartment protects things from dust and random straits.

Especially relevant is the upper glove compartment for family trips, where each passenger needs his own place for things. For example, in Kodiaq With the third row of seats, access to standard compartments is difficult - the upper glove compartment becomes a salvation.

📊 Where do you usually store the little things in the ŠKODA Kodiaq?
  • In the standard glove box.
  • In the pockets of the door
  • On the armrest.
  • In the bag/backpack
  • Another option

What types of glove compartments are suitable for Kodiaq?

Not all accessories are universal - for ŠKODA Kodiaq (especially for restyled models from 2021), it is important to choose a glove compartment that:

  • 📏 It fits. sizes to the center console (width ~30-35 cm).
  • 🔧 Has fasteningsCompatible with plastic panels Kodiaq.
  • 🎨 Corresponding. salon design (Black matte, glossy or under a tree).

There are three main types on the market:

Type of glove compartment Benefits Disadvantages Price, rubles
Universal (on sticky tape) Easy installation, does not require drilling It can fall off when heated, limited load capacity 1 200–2 500
With clip fastening (for ŠKODA/VW) Reliable fixation, does not spoil the skin Requires a precise fit to the model 2 800–4 500
Integrated (instead of a regular shelf) Maximum integration looks like native Complex installation, may require the panel to be modified 5 000–8 000

For Kodiaq Optimal second option - glove compartments on clips from brands Heko, Thule or ŠKODA Original. They are tested for compatibility with the plastic cabin and leave no traces when dismantled.

💡

Before purchasing, please check if it is included rubber gaskets They prevent creaking when vibrating.

Preparing for installation: tools and materials

To install the upper glove compartment on ŠKODA Kodiaq, you will need:

Screwdriver with cross bat (T20/T25)

Plastic film for clips (or flat screwdriver wrapped with tape)

Alcohol wipes for surface degreasing

Line or bar for measuring distances

Hair dryer (if glove compartment on double-sided scotch)

-->

Also in advance:

  • 🔋 Disable ignition and remove battery terminal (If the glove compartment requires a connection to the wiring).
  • 📸 Take a picture of the location of the clips and wires under the panel - this will help with the reverse assembly.
  • 🧴 Prepare silicone grease For clips, if they're tight.

Important: in Kodiaq 2020+ year of release clips of the center console may differ from earlier models. Check their shape before buying a glove box!

Step-by-step installation instructions

Let’s look at the example of a glove box. Heko 9260which is suitable for ŠKODA Kodiaq and Volkswagen Tiguan:

  1. Removing the decorative trim:

    Carefully tuck the plastic panel over the central deflectors (air ducts) with a plastic taker. Start at the right edge - there's a weaker clip. Don't pull too hard to break the latches!

  2. Fixing of brackets:

    Attach metal brackets from the kit to the mounting places (usually they are marked on the back of the glove compartment). Secure them with screws. M4×12mmBut don’t tighten until the end – you may need to adjust.

  3. Installation of glove compartment:

    Put the glove compartment on the brackets and fix it with bolts. Make sure the lid opens without snags. If the glove compartment clings to the panel, loosen the mounts and adjust the position.

  4. Connecting wiring (optional):

    If there is light in the glove compartment, connect it to the wires. 12V from a lighter or salon lighting. Use it. female terminals And a heat-shrink tube for insulation.

    Backlight connection diagram

    The glove compartment light can be connected in parallel to the lamp of the salon lighting (usually) red wire - +12V, black - mass). If you want the light to turn on when you open the lid, add to the chain reed-sensor Or a micro-switch.

After installation, check:

  • 🔊 Are there any squeaks when driving on a rough road?
  • 🔦 Does the lighting work (if any)?
  • 🚪 Does the glove compartment prevent the glove box from opening?
💡

If the glove compartment is installed correctly, its cover should open. one hand effortlessly, and the gaps between the panel and the body do not exceed 2 mm.

Common mistakes and how to avoid them

Even with the apparent ease of installation, the owners Kodiaq Often make mistakes that lead to creaking, skewing or damage to the panel. Here are the most common:

⚠️ Attention: Never use superglue or mounting foam to fix the glove compartment! When dismantled, you will damage the plastic of the console, and the residue of the glue will attract dust.
  • 🔧 Retightening the fasteners - causes cracks in the plastic. Tighten the bolts with no more effort 1.5 Nm.
  • 📏 Disparity in width - if the glove compartment is wider than 35 cm, it will rest on the deflectors of the blower. Measure the distance between the air ducts before purchase!
  • 🔌 Incorrect connection of the lighting - could cause a short circuit. Always use a safety lock on 5A in the chain.

Another common problem is glove-box At high speeds. To eliminate it:

  1. Check the density of the rubber gaskets.
  2. Add under the brackets double sided tape 3M VHB.
  3. Make sure that the console clips do not backfire (if necessary, replace them with new ones).

There are dozens of options on the market, but not all are equally good. We tested several models and made a rating on the price / quality ratio:

Model Material Features Average price, rubles
ŠKODA Original 5E0 858 101 ABS plastic, soft lock Perfect landing, lighting complete 7 200
Heko 9260 Impact resistant plastic Universal, but requires the improvement of fasteners 3 800
Thule 627001 Aluminum + plastic It can withstand up to 3 kg, but heavier than analogues 5 500
AutoExpert AE-KD-01 Matte plastic Budget, but creaks without additional noise insulation 2 100

If you are looking premium option, take it ŠKODA Original It was designed specifically for Kodiaq It doesn't need any further work. It's a savings option. Heko 9260Be prepared to put a soundproof material under it.

Care and operation of the upper glove compartment

To keep the glove compartment long:

  • 🧼 Clean up. its moist microfiber cloth without abrasives (especially if the surface is glossy).
  • 🔑 Don't keep it. It has heavy objects (for example, coins or keys with a key fob) – this deforms the mounts.
  • 🔧 Check every six months. bolt tightening - vibrations can weaken them.

If the glove compartment started creaking:

  1. Take it off and apply it to the mounts. silicone grease.
  2. Check if it's between the panel and the body. dust.
  3. If necessary, put it under the brackets. thin rubber gasket.
⚠️ Attention: Do not use alcohol-based or solvent-based products for cleaning the glove compartment - they can damage the coating of the plastic, especially if it is textured "under the skin".

FAQ: Frequently asked questions about installation

Can I install a top glove compartment on the Kodiaq with a Virtual Cockpit panel?

Yes, but you need to choose a model with posteriorSo that it does not overlap the sensors of the system. Travel Assist. For example, it fits. ŠKODA Original 5E0 858 101 - he's tested with Virtual Cockpit It's not a hindrance.

Will the glove compartment interfere with the work of climate control?

Not if you choose the right size. Most glove compartments are fastened above-deflectors They don't cut off the air. However, models with a blank back wall (for example, AutoExpert AE-KD-01) may slightly reduce the efficiency of windshield blowing.

Do I need to remove the dashboard for installation?

No, it's enough to take it off. decorative overlay above the central ducts. Complete dismantling of the dashboard is required only when installing embedded models with backlight connected to the standard wiring.

How much weight can the upper glove compartment withstand?

Depends on model:

  • Universal on Scotch - up to 0.5 kg.
  • On clips (e.g., Heko 9260) - up to 1.5 kg.
  • Embedded metal (e.g., Thule 627001) - up to 3 kg.

Excessive load leads to deformation of the fasteners or separation of the glove compartment with sharp braking.

Can I paint the glove compartment in the color of the cabin?

Yes, but only matte-plastic models. Use paint for plastic (for example, MOTIP Dupli-Color) and be sure to degrease the surface before painting. Glossy glove compartments are not recommended to paint - the paint will peel off.