Ε koda Fabia second generation (2007–2014) is one of the most popular hatchbacks in Russia, and the rear bumper here is not only a design element, but also an important protective detail. Chips, cracks or deformations after an accident require replacement, but how not to make a mistake with the choice? In this article we will analyze the original articles, high-quality analogues, the nuances of dismantling and typical mistakes that are made during repairs.

Feature rear bumper Fabia 2 β€” its design with integrated fog lights (on some trim levels) and mounts for parking sensors. This makes it difficult to find a replacement part if you want to maintain functionality. We analyzed market offers, owner reviews and technical documentation to collect up-to-date information - without water and general phrases.

Original articles and their features

Rear bumper for Ε koda Fabia 2 (body 5J) is supplied under several articles depending on the configuration and year of manufacture. Main original numbers:

  • πŸ”Ή 6U6 807 407/408 β€” bumper without holes for PTF (for basic versions).
  • πŸ”Ή 6U6 807 409/410 β€” with holes for fog lights (options Ambiente, Elegance).
  • πŸ”Ή 6U6 807 411/412 β€” for models with parking sensors (optional Park Pilot).

Important: bumpers for Fabia Combi (station wagon) do not fit the hatchback! Also pay attention to the side of the steering wheel - the mounts may differ for left-hand and right-hand drive versions. Original parts are made from polypropylene (PP) with additives for impact resistance, but their price often exceeds 15–20 thousand rubles.

Critical nuance: on the restyled models (2010–2014), the shape of the attachments to the wing has changed - the pre-facelift bumpers (2007–2009) are not interchangeable! Check the vehicle's VIN or consult a catalog ETKA before purchasing.

Article Description Approximate price (RUB) Applicability
6U6 807 407 Without PTF, without parking sensors 12 000–15 000 Basic configurations, pre-restayl
6U6 807 409 With holes for PTF 14 000–17 000 Ambiente, Elegance, 2007–2014
6U6 807 411 With mountings for parking sensors 16 000–20 000 Option Park Pilot, restyl

Analogs and non-original spare parts: what to choose?

Original bumpers are expensive, so many owners consider analogues. among trusted manufacturers:

  • πŸ”§ Febi (Germany) - article 28650, quality close to OEM, price ~8,000 rub.
  • πŸ”§ Hella (for versions with PTF) - article number 8ZL 357 007-041, ~9,500 rub.
  • πŸ”§ Polcar (Poland) - a budget option (~5,000 rubles), but there may be problems with fit.
  • πŸ”§ Topran - article number 101 807, average quality, ~6,500 rub.

When choosing an analogue, be sure to check:

  1. Availability reinforcing beam (included or separately).
  2. Compliance mounting holes for headlights and sensors.
  3. Plastic thickness - cheap bumpers are often 1-2 mm thinner than the original.

πŸ“Š Which bumper would you prefer for Fabia 2?
  • Original (expensive, but reliable)
  • Febi/Hella (quality+price)
  • Polcar/Topran (budget)
  • I don't know, I need some feedback

⚠️ Attention: Bumpers from VW Polo 9N3 They look similar, but the fastenings do not match! The difference is in the location of the brackets and the shape of the bottom edge.

Step-by-step instructions for replacing the rear bumper

Replacing the bumper with Fabia 2 does not require special tools, but will require care. Average operating time is 1.5–2 hours. You will need:

  • πŸ”¨ Phillips screwdriver (or screwdriver).
  • πŸ”¨ Plastic spatulas for removing clips.
  • πŸ”¨ 10 mm socket wrench (for fastening bolts).
  • πŸ”¨ Lubrication WD-40 (if the clips are stuck).

β˜‘οΈ Preparing to replace the bumper

Done: 0 / 4

Dismantling algorithm:

  1. Unscrew 4 bolts attaching the bumper to the side members (access from the trunk).
  2. Remove plastic clips along the lower edge of the bumper (there are 6–8 of them).
  3. Disconnect the connectors fog lights and parking sensors (if available).
  4. Gently pull the bumper towards you, starting from one corner.

What to do if the clip breaks?

If the plastic clip is cracked, do not try to β€œget it out” - it will remain in the hole. Use pliers to pull out the broken piece and install a new clip (part number N 908 132 01 for Fabia 2).

When installing a new bumper:

  • πŸ”Ή Check gaps between the bumper and fenders (must be the same).
  • πŸ”Ή Do not overtighten the bolts - the plastic may crack.
  • πŸ”Ή Connect the headlight/sensor connectors up to final fixation.

πŸ’‘

The most common mistake is incorrect installation of clips. If the bumper β€œwalks” after replacement, check their fixation and, if necessary, add additional screws.

Typical bumper problems and repairs

Even with careful use, the bumper Fabia 2 susceptible to damage:

  • πŸš— Cracks - most often near the fastenings to the side members or under the headlights.
  • πŸš— Chips in paint - due to the low durability of paintwork on plastic.
  • πŸš— Detachment of the reinforcing beam - with strong impacts.
  • πŸš— Scuffs from friction against curbs (lower edge).

Small cracks (up to 10 cm) can be repaired soldering plastic with fiberglass reinforcement. To do this:

  1. Clean the edges of the crack sandpaper P80.
  2. Solder with a soldering iron (power 60–80 W) on both sides.
  3. Apply epoxy resin on the reverse side and reinforce with fiberglass.
  4. Sand and paint.

If the bumper β€œsags” or does not hold well, the problem may be:

  • πŸ”§ Worn out mounting brackets (article 6U6 807 501/502).
  • πŸ”§ Deformed reinforcing beam (needs replacement).
  • πŸ”§ Torn off welding points on the side members (needs body repairs).
⚠️ Attention: If the light comes on after replacing the bumper ESP or ABS, check the parking sensors - their connectors may have oxidized or been damaged during dismantling.

Bumper painting: technology and nuances

Even a new bumper often requires painting - original parts are supplied primed (primer). For Fabia 2 important:

  • 🎨 Use plastic primer (for example, Novol Plastic Primer).
  • 🎨 Select paint according to the body color code (on the plate under the hood).
  • 🎨 Apply flexible varnish (for example, Sikkens Autoclear) to avoid cracks.

Painting technology:

  1. Degrease the surface antisilicon.
  2. Apply 2 coats of plastic primer (dry 15 minutes between coats).
  3. Paint in 2–3 layers (gun distance 20–25 cm).
  4. Apply varnish and polish after 24 hours.

How to avoid "orange peel"?

To ensure the varnish lays evenly, use low temperature reducer (if painting in a garage in winter) and hold the gun at a 90Β° angle to the surface. The speed of movement must be the same!

The cost of painting in the service is from 5,000 rubles. (without materials). If you paint yourself, keep in mind:

  • πŸ”Ή Spray gun should have a nozzle of 1.3–1.4 mm.
  • πŸ”Ή Room temperature - not lower than +18Β°C.
  • πŸ”Ή For metallics (Candy White, Brilliant Silver) needed base layer + varnish

Where to buy a bumper for Fabia 2: trusted suppliers

Prices and assortment greatly depend on the region, but we have collected reliable options:

Supplier Pros Cons Average price (RUB)
EXIST.ru Large selection, original and analogues Long delivery to regions 7 000–18 000
EMEX Often in stock, discounts Not always accurate photos 6 500–16 000
Local showdowns Low price (RUB 3,000–8,000) The risk of buying a broken bumper 3 000–10 000
Official dealers Original warranty Highest prices 15 000–22 000

When purchasing a used bumper, be sure to check:

  • πŸ” Condition mounting holes (are they broken).
  • πŸ” Integrity reinforcing beam (it should not be bent).
  • πŸ” Availability chips on the inside (a sign of a strong blow).

Frequently asked questions about the Fabia 2 rear bumper

Is it possible to install a bumper from a Fabia 3 on a second one?

No, the geometry of the mounts is completely different. Even externally similar bumpers from Fabia 3 (body NJ) will not fit in terms of seating and shape.

What glue is best for repairing cracks?

For long-term repair use 3M Scotch-Weld DP8005 (two-component epoxy adhesive) or Loctite 330. For temporary - adhesive-sealant ABRO PR-11.

Do I need to paint a new original bumper?

Yes, original bumpers are supplied in primed form (color primer gray). They must be painted to match the body color.

What should I do if the PTFs do not work after replacing the bumper?

Check:

  1. Integrity connectors on the headlights.
  2. fuse F35 (10A) in the block under the steering wheel.
  3. Settings PTF relay (may fail when disconnecting the battery).
How to protect the bumper from chips?

Effective ways:

  • πŸ›‘οΈ Apply anti-gravel film (for example, 3M Scotchgard).
  • πŸ›‘οΈ Install protective molding to the bottom edge.
  • πŸ›‘οΈ Treat regularly wax or ceramics.