ŠKODA Kodiaq rear bumper: how to choose, change and repair?

Škoda Kodiaq One of the most popular crossovers in Russia, but even such a reliable car is not immune to damage. The rear bumper here suffers most often: from unsuccessful parking to an accident on the highway. In this article, we will analyze how to choose the right part (original or analog), how much it costs to replace the service and whether it is possible to cope independently. And also, Let's unlock the secrets of repair without completely replacing the part.

Since 2017 Kodiaq It comes in three restyled versions, and bumpers for them are different - this is critical when choosing. We have collected the current articles, prices for 2026 and step-by-step instructions with a photo. Plus. Unique data on the compatibility of bumpers from Karoq and VW Tiguanwhich are suitable for Kodiaq minimally.

Rear bumper design Škoda Kodiaq: what's inside?

Rear bumper Kodiaq It is not just a plastic lining, but a complex module of several elements:

• 🔹 Outer skin visible part of the thermoplastic polymer (usually) PP/EPDM), which is taking the blows.
• 🔹 Amplifier (energy absorbing element) a metal or plastic beam that extinguishes energy in a collision.
• 🔹 Mounting brackets 4-6 fixation points to the body (2 from the bottom, 2 on the sides, sometimes +2 on top).
• 🔹 Parking sensors (if installed) - in the bumper there are seats under 4 sensors.

On Kodiaq after facelift 2021 bumper became wider by 20 mm (due to increased wheel arches), and energy-absorbing beam received additional ribs of stiffness. That means that The bumpers are not interchangeable after the restyle!

Inside the skin is often hidden:

• 🔌 Connectors for connecting lights and sensors.
• 🔧 Process hatches for access to headlamp anchorages.
• 📏 Installation tags for centering when replaced.

⚠️ Attention: On versions with Traffic Jam Assist (Congestion assistance system) a radar is installed in the bumper. Replacement required recalibration In the service, otherwise the system will give false positives.

Original vs. Analog: What to choose for a replacement?

Price of a new original bumper from Škoda starts from 45,000 rubles (no painting!) Analogs are 2-3 times cheaper, but there are pitfalls. Let’s look at the pros and cons of each option:

Criterion	Original bumper	Analogue (for example, Febi, Hella)
Compatibility	100% seats, no improvements	It may be necessary to fit the anchorages
Material	High-strength PP/EPDM with UV protection	Often more fragile plastic, burns out in the sun
Warranty	12-24 months from the dealer	6 months (if you're lucky)
Price (with painting)	60 000 — 90 000 ₽	25 000 — 40 000 ₽

Among the analogues, they proved themselves best:

• 🥇 Febi (Germany) - article 32100 for dorestayla, 32101 for a restyle. Geometry is precise, but plastic is tougher than the original.
• 🥈 Hella (China, but under German control) – article 8PA 358 007-551. Nice paint adhesion.
• 🥉 Polcar (Poland) - budget option, but often requires the modification of mounts for sensors Parktronics.

Secret life hackA bumper from VW Tiguan Allspace (article 5NA 807 217) suitable for Kodiaq pre-facelift with minimal improvements - you just need to expand the holes for the mounts of the lights. Savings of up to 30%!

Articles and prices: current data for 2026

For the exact selection of bumpers you need to know Vehicle VIN or at least a year of production and completeness. Below is a table with articles of original details for different versions. Kodiaq:

Model	Bumper part number	Articularity of the amplifier	Prim. price (rubles)
Kodiaq pre-facelift (2017-2020)	5NM 807 217 B 9B9	5NM 807 501	45 000 — 55 000
Kodiaq restyle (2021-2023)	5NM 807 217 C 9B9	5NM 807 501 A	50 000 — 65 000
Kodiaq Restyle 2 (2026+)	5NM 807 217 D 9B9	5NM 807 501 B	60 000 — 75 000
Kodiaq RS (all years)	5NM 807 217 E 9B9	5NM 807 501 C	70 000 — 90 000

Prices are for dyed-out bumpers. Painting in body color will cost in additional 15 000 — 25 000 ₽depending on the complexity (for example, metallic or pearl is more expensive).

Where to buy:

• 🏢 Official dealers Škoda - guarantee, but high price.
• 🛒 Exist.ru, Autodoc - a wide range of analogues, often with discounts.
• 🔧 Disassembly - used bumpers from 10,000 rubles, but the risk of hidden defects.

⚠️ Note: When buying a used bumper, be sure to check reinforcement They often break down in an accident and cannot be restored.

Step-by-step instructions for replacing the rear bumper

Replacing the bumper with Kodiaq takes 1.5–2 hours If you have a tool. Here's what you're gonna need:

• 🔧 Socket wrenches 10 and 13 mm.
• 🔨 Plastic spatulas for removing clips.
• 🔌 Screwdriver with a Phillips bit.
• 🎨 Painting tape (so as not to scratch the body).

Step by step process:

1. Removing the old bumper:
   • Open the trunk and remove the plastic door sill trim (held on by 4 clips).
   • Unscrew 2 bolts of the bumper mount to the spars (end on 13).
   • At the bottom, turn 4 screws (cross screwdriver) and disconnect the parking sensor connectors.
   • Carefully pull the bumper on yourself - it should come out of the grooves.
2. Preparation of the new bumper:
   • Move all mounts from the old bumper (lights, sensors, license plate).
   • Check the combination of holes for parktronics - if necessary, expand them with a file.
3. Installation:
   • Fix the bumper on the body, starting with the upper grooves.
   • Tighten the bolts to the spars (puffing moment) 20 Nm).
   • Connect the sensor connectors and check their operation.

No backlashes in the mounts | Parktronics performance | Bumper center relative to the headlights | Puffing all bolts->

The hardest part is adjust the gaps correctly between the bumper and the wings. They should be the same on both sides (optimally, they should be the same). 3–5 mm).

What to do if the bumper doesn't fit in place?

If the new bumper does not get into the grooves, check:

(1) Are the brackets bent on the body (often after an accident)?

(2) Do not the trunk seals interfere (sometimes they need to be removed temporarily).

(3) Does the bumper article match your version? Kodiaq (pre-facelift/restyle).

If the problem is in the amplifier - it can be bent with a rod, but do not overdo it so as not to break.

Replacement of the bumper: When is it possible?

Not every injury needs a complete replacement. Here are the cases where the bumper Kodiaq It can be repaired:

• 🔧 Cracks (up to 15 cm) - welded with a soldering iron with a plastic bar.
• 🎨 Scratches/splinters - slapped and repainted.
• 💥 Dents (without tearing plastic) - stretched with a building hair dryer.
• 🔌 Fractured anchorages - Reduced with epoxy resin with reinforcement.

Technology for crack repair:

1. Clean the edges of the crack with sandpaper (P80).
2. Drill at the ends of the crack hole ∅2 mmSo she doesn't go any further.
3. Cook with a soldering iron (temperature) 250–300°C) soldered with plastic.
4. Strengthen on the back with fiberglass mesh and epoxy.
5. Fill it, grind it and paint it.

Service repair cost:

• 🔧 Welding cracks -- from 3 000 ₽.
• 🎨 Local paint -- from 5 000 ₽.
• 🔧 Recovery of the mounts - from 2 000 ₽.

⚠️ Warning: If the bumper is damaged in the area amplifier (see dents on metal beam), repair useless - detail It is necessary to changeIt will not restore its protective properties.

Painting bumper: technology and cost

Even a new bumper requires painting unless you buy it in the color of the car (which is more expensive by 30-50%). The process includes several stages:

1. Preparation:
   • Degreasing the surface (Anti-Silicone).
   • Plastic soiling (art.Plastic Primer).
2. Painting:
   • Base layer (body color).
   • Varnish (2K HS Clearcoat for durability).

Drying at least 6 hours with 60°C (in the cell).

Prices for painting in Moscow (2026):

Type of painting	Price (rubles)	Deadlines
Local (partial)	5 000 — 8 000	1 day
Complete (removal/installation)	15 000 — 25 000	2–3 days
Metalik/pearl	20 000 — 35 000	3–4 days

Tips for choosing a service:

• 🔍 Check reviews on Yandex.Maps - Look for references to plastic-painting (It's more complicated than metal).
• 🎨 Ask what type of paint is used – optimally. PPG or Sikkens.
• 📸 Ask for photos of previous works Kodiaq The color should be 100% the same.

Common replacement mistakes and how to avoid them

Even experienced professionals sometimes make mistakes, which then result in new expenses. Here are the most common:

• 🚫 Ignoring alignment If the bumper is even 5 mm off, it catches your eye. Always check the symmetry of the Škoda logo on the trunk lid.
• 🚫 Savings on fastenings Old bolts and clips break when re-installed. Buy a new set (article) N 908 132 01 for the clips.
• 🚫 Incorrect tightening - pulled bolts lead to cracks in the plastic, a weak puff - to rattles on the bumps.
• 🚫 Forget about sensors. If you do not connect the parking sensors, an error will light up on the panel. P163A (Parking assistant failure)

How to check the installation quality:

1. Open the trunk and pull the bumper on yourself - there should be no backlash.
2. Ask the assistant to press the bumper from above – if it bends more than 1 cm, the mounts are weakened.
3. Engage reverse - all parktronics should beeping in synchrony.

FAQ: Answers to frequently asked questions

Can I put a bumper on the Kodiaq RS to the regular version?

Technically yes, but some improvements will be required:

• 🔧 Replace the amplifier with the original RS (article 5NM 807 501 C).
• 🎨 Repaint the bumper to body color (on RS He's always black.
• 💡 You will also need to change the back lights to LED version (article 5NM 945 095/096), as the anchorages are different.

Total costs - from 80 000 ₽.

How much does it cost to replace a bumper in the official service Škoda?

Cost of work (excluding spare parts):

• 🔧 Replacing the bumper - 8 000 — 12 000 ₽.
• 🎨 Painting -- 15 000 — 25 000 ₽.
• 🔧 Radar calibration (if any) 5 000 ₽.

Total: 28 000 — 42 000 ₽ Just for work.

What if the bumper left after an accident, but did not crack?

Probably bent. mounting brackets Or the amplifier burst. Action:

1. Remove the bumper and inspect the metal beam - if it is deformed, only replace.
2. Check the brackets (article) 5NM 807 502) – they can be straightened or replaced (cost ~ 2000 rubles per piece).
3. If the bumper plastic is not damaged, it can be put back after the fasteners are repaired.

What glue should I use to repair cracks?

For plastic PP/EPDM (from which the bumper is made Kodiaq) fit:

• 🧪 3M Scotch-Weld DP8005 Two-component epoxy glue, withstands up to 120°C.
• 🧪 Loctite Plastics Bonding System - a set with an activator for complex plastics.
• 🧪 Weicon Plastic Repair German glue, compatible with PP.

Cost - from 1 500 ₽ behind the tube. Before you start, clean and degrease the surface!

Is it possible to drive without a bumper?

Technically yes, but:

• 🚨 This traffic violation (ch.) 1 st. 12.5 Administrative Code - warning or fine 500 ₽).
• 💨 Aerodynamics worsens - fuel consumption can increase by 0.3–0.5 l/100 km.
• 🚗 There is no protection for lights and sensors – the next impact they will break.

If the bumper is removed temporarily (for example, for repairs), seal open mounts. masking tapeSo that it doesn't get mud.