Rear wiper brush on Škoda Kodiaq: a complete guide to choosing and replacing

Rear wiper blade on Škoda Kodiaq A small but critical element that is critical to visibility and safety in rain or snow. Many owners are faced with the fact that the original brushes quickly wear out, begin to creak or leave divorces. At the same time, the choice of replacement is not as simple as it seems: you need to take into account not only the size, but also the type of fastening, the blade material and even the year of release of the car.

In this article, we will discuss everything you need to know about back brushes for Kodiaq: from official articles and the best analogues to step-by-step instructions for replacing with photos and videos. You will also learn how to extend the life of brushes, what mistakes owners make when choosing and why cheap options can cost more in the long run. If you want to understand the topic to the smallest detail – read on.

Original back brushes for Škoda Kodiaq: articles and dimensions

On Škoda Kodiaq (including restyled versions) are installed back brushes wiper length 350 mm. This is the standard size for most crossovers. VW GroupIt is important to consider the type of mounting. Kodiaq system is used Top Lock (sometimes denoted as Side Lock or Hook 9x3). Original articles:

• 🔧 5Q1 955 425 A - Standard brush for models until 2021 (without heating).
• ⚡ 5Q1 955 425 B Heated version (installed on cars with option) Heated Rear Wiper).
• 🔄 5Q1 955 425 C - Renovated brush for facelift Kodiaq (from 2021), with improved rubber profile.

Note: heated brushes do not visually differ from ordinary ones, but have a built-in heating element. Install a non-original brush without heating on the machine with this option is possible, but the functionality will be lost. Check the presence of heating can be done in Onboard computer → Settings → Heating the rear window If there is a separate item for brushing, then you have a heated version.

Article	Length (mm)	Mounting type	Heating	Applicability
5Q1 955 425 A	350	Top Lock	No	Kodiaq 2017–2020
5Q1 955 425 B	350	Top Lock	Yes	Kodiaq with option Heated Rear Wiper
5Q1 955 425 C	350	Top Lock	No	Kodiaq facelift (2021–present)
3B2 955 425	350	Side Lock	No	The same for older models (not suitable for the Kodiaq!)

Important: On some Kodiaq 2020 release could be installed brushes with articular 5Q1 955 425 without the letter index is the same detail as the version "A", but without specifying the heating. When ordering, check with the dealer or check the VIN code to avoid errors.

The best Kodiaq backbrush analogues: what to choose instead of the original?

Original brushes from Škoda They cost from 1,500 to 2,500 rubles (depending on the version), but there are worthy analogues on the market, which sometimes last longer. The main thing is to choose products of proven brands with the right type of fastening (Top Lock). Best options:

• 🏆 Bosch 3397004665 - silent, with a graphite coating of the blade. The average service life is 1.5-2 years. Price: ~1,200 rubles.
• 💎 Valeo 607048 - premium segment, with technology Silent Blade (reduced noise) Suitable for extreme temperatures. Price: ~1,800 rubles.
• 🔥 SWF 1135000 - Budget option (about 600 rubles), but the quality of the rubber is worse - they serve no more than a year.
• ❄️ HELLA 8WL 350 008-131 Optimized for winter operation, do not swell in the cold. Price: ~1,100 rubles.

When choosing an analogue, pay attention to:

1. Blade material: optimal - graphite-sprayed rubber (for example, at Bosch or Valeo). Silicone brushes are longer-lasting, but they cost 2-3 times more expensive.
2. Presence of spoiler: on Kodiaq It is better to take brushes with a built-in aerodynamic element - they are pressed against the glass more evenly.
3. Guarantee: from official dealers Bosch and Valeo There is a 1–2 year warranty, whereas budget brands often do not.

Avoid cheap "nouneim" brushes (price below 500 rubles): they quickly lose elasticity, leave stains and can scratch the glass. This is especially true for machines with heated rear window - poor-quality rubber when heated deforms and sticks to the surface.

Step by step: how to replace the back brush with Kodiaq with your own hands

Replacing the rear brush with Škoda Kodiaq It takes no more than 5 minutes and does not require any tools. The main thing is to act carefully so as not to damage the mount or glass. Algorithm:

1. Raise the wiper: gently pull it on yourself until fixed in an upright position. Don’t put too much effort into it – the mechanism is fragile!
2. Press the latch: on the back of the brush, find a plastic clip (usually painted black or gray). Press it with your thumb and simultaneously pull the brush down.
3. Remove the old brush: After clicking, it will easily be removed from the lever. If the lock does not give in, do not break it - try to swing the brush left-right.
4. Install a new brush: combine the mount with the wiper lever and press until a characteristic click. Make sure the lock is snapped.
5. Lower the wiper: smoothly return it to its original position, pressing against the glass.

After replacement, turn on the wiper at minimum speed and check if there are any extraneous noises or omissions. If the brush "jumps" on the glass, it means that it is installed incorrectly or does not fit in size.

What to do if the latch is broken?

If the plastic clamp on the brush attachment cracked, do not try to glue it - it will not withstand the load. Buy a new adapter (article) 5Q1 955 985 for Kodiaq) or replace the entire janitor assembly. Temporary solution: wrap the attachment with tape, but it is unreliable.

Video instructions (If you need a demonstration):

There are detailed replacement videos on YouTube, for example, from the channel. Škoda Service Russia. Search for: Replacement of the Kodiaq 5Q1 955 425 rear brush.

Common mistakes in choosing and replacing brushes with Kodiaq

Even experienced car owners sometimes make mistakes that lead to rapid wear of the brushes or damage to the glass. Here are the most common:

⚠️ Attention: Never use long brushes. 350 mm They will cling to the plastic janitor’s casing and can break the mechanism. Also avoid models with u-hook (shoes) - they're not suitable for Kodiaq!

• 🔄 Buying brushes without taking into account heating: if your car is equipped with a brush heating, and you install the usual - the function will stop working, and the onboard computer may give an error.
• 🧴 Use of silicone lubricant: Many owners lubricate rubber brushes with silicone for "softness", but this leads to the opposite effect - the blade begins to slip through the glass.
• ❄️ Operation in winter without preparation: treat brushes before frost icing-de-icing (for example, Liqui Moly Anti-Frost), otherwise the rubber will crack.
• 🔧 Strong pressure during installationIf the brush does not sit on the mount, do not hit it with a hammer - so you will break the fixture. Check if you have bought the size you want.

Another common problem is brush-wear. If one side wears off faster, it means:

• The janitor's lever is bent (need to be straightened or replaced).
• The glass has irregularities (check for STO).
• The sleeve is set to the right (reset it).

How to extend the life of the back brush on the Škoda Kodiaq?

The average service life of the back brush is 1-1.5 years, but with proper care it can be operated up to 2-3 years. Here's what really works:

• 💧 Regular cleaning: Once a month, wash the brush with warm water and soap, removing sand and tar. Don't use solvents!
• ☀️ UV protectionWhen parking in the sun, cover the back window light protection screen The rubber of the brush is destroyed by ultraviolet light.
• ❄️ Winter preparation: treat the brush before frost glycerin (a few drops on the blade) - this will prevent freezing to the glass.
• 🚿 Proper Use: Do not turn on the wipers on dry glass - this erases rubber. Always spray the glass with a washer first.

If the brush starts to creak, do not rush to change it. Try it. restore tires:

1. Soak a rag in vinegar solution (1:1 with water) and wipe the blade.
2. Put it on the brush. special lubricant (for example, WD-40 Specialist Silicone).
3. Let dry for 10-15 minutes and check the work.

These measures will help to extend the life of the brush by 3-6 months, but if the rubber is cracked or deformed - only a replacement.

Frequent questions about the back brushes on the Škoda Kodiaq

We have collected answers to the most popular questions from owners Kodiaq on this topic:

Can I put a brush 380 mm long instead of 350 mm?

No, it's going to cause the brush to snag the plastic janitor's casing and it could break the mechanism. Maximum permissible length: 350 mm.

How do I know if the brush is heated?

It is not possible to distinguish it visually, but you can check it like this:

1. Turn on the ignition.
2. Activate the rear window heating.
3. After 1-2 minutes, gently touch the brush - if it is warm, then heated.

You can also check the VIN code at the dealer or at the ETKA.

Why does a new brush leave streaks?

There are several reasons:

• The glass is contaminated with wax or silicone (needs to be cleaned Sonax Glass Cleaner).
• The brush is installed incorrectly (re-install it).
• Rubber is too hard (let it work for 1-2 days, usually divorces disappear).

Can I install a frameless brush on the Kodiaq?

Technically, yes, but it's suboptimal. Frameless brushes are worse pressed against the glass at high speeds (due to the aerodynamics of the crossover), so they can miss sections. Better choose. spoiler-frame.

How much does it cost to replace a brush from an official dealer?

At dealers Škoda Replacement of the back brush is from 500 to 1,000 rubles (only work). But this procedure is easy to do yourself in 5 minutes, so overpaying is pointless.

Where to buy a back brush for Kodiaq: checked stores and prices

You can buy an original or high-quality analog brush in the following places (prices are current for 2026):

Store	Original (5Q1 955 425 A)	Bosch 3397004665	Valeo 607048	Delivery
EMEX	1,800 rub.	1,250 rub.	1,700 rubles.	1-3 days (free of charge from 3 000 rubles)
EXIST	1,950 rubles.	1,180 rubles.	1,650 rubles.	2-5 days (from 300 rubles)
Autodoc	2,100 rub.	1,300 rub.	1,800 rub.	3-7 days (free of charge from 1,500 rubles)
Official Škoda dealer	2,400 rubles.	—	—	1-2 days (usually available)

When purchasing online, be sure to check:

• 📦 Availability of guarantee (The salesman must have been at least 1 year old.)
• 📋 Compatible with your model (state year of issue) Kodiaq).
• 🚚 Return Policy Some stores will not accept back brushes if the packaging is opened.

If you live in a region with harsh winters, look out for shops specializing in the archery, for example, NordMaster. There are often brushes with a reinforced rubber profile for frosts below -30°C.

Which backbrush to choose for the ŠKODA Kodiaq?

To summarize, we can highlight several key points:

1. Original vs analoguesIf the budget allows, take the original (5Q1 955 425 A/C) - it is guaranteed to fit and last longer. The best analogue is the best. Bosch 3397004665 (optimal price/quality ratio).
2. HeatingIf your car is equipped with a heated brush, buy only the index version. B Check compatibility with VIN.
3. CareRegular cleaning and protection from UV rays prolong the life of the brush by 1.5-2 times.
4. ReplacementThe procedure takes 5 minutes and requires no tools – do not overpay the dealers.

Remember: The back brush on the Kodiaq is not just an accessory, but a safety element. Poor visibility in the rain increases the risk of accidents by 30% (data traffic police for 2023). Do not skimp on quality and monitor the condition of the rubber.

If you have any questions about a specific model of brush or have difficulties with installation - write in the comments, we will help you understand!