Mirrors on ล koda Fabia second generation (2007โ€“2014) is not just a design element, but a critical safety component. Visibility, driving comfort and even the result of technical inspection depend on their condition. Owners Fabia 2 often encounter problems: cracked side mirrors after an accident, a tarnished interior mirror or non-working heating. In this article we will analyze all types of mirrors for the model, their article numbers, replacement methods and nuances of choosing between originals and analogues.

Feature Fabia 2 โ€” in a variety of configurations: from basic Active to top Elegance, where mirrors can be equipped with heating, electric drive and even turn signal indicators. We have collected current data on sizes, fastenings and compatibility, so that you do not make a mistake when purchasing. And for those who are planning a DIY replacement, we will provide step-by-step instructions with photos and warnings about common errors.

Types of mirrors on the ล koda Fabia 2: what they are and how they differ

On Fabia 2 Three types of mirrors were installed, differing in functionality and design:

  • ๐Ÿ”น Side mirrors - left and right, with manual or electrical adjustment. In complete sets Comfort and higher often came with heating and built-in turn signals.
  • ๐Ÿ”น Salon mirror โ€” standard (on a bracket) or with automatic dimming (auto-dimming) in top versions.
  • ๐Ÿ”น Mirrors in sun visors โ€” optionally installed in complete sets Ambition and Elegance.

The key difference between side mirrors is fastening type. On Fabia 2 two options were used:

  • ๐Ÿ”ง On three bolts - typical for basic versions without heating.
  • ๐Ÿ”ง On plastic clips โ€” in mirrors with electric drive and heating (requires care when dismantling!).

Interior mirrors are mounted on adhesive backing or metal bracket (depending on the year of manufacture). For example, on restyled models (2010โ€“2014), a bracket with rubber dampers was often installed to reduce vibrations.

๐Ÿ“Š What kind of mirrors does your Fabia 2 have?
  • Side only (manual adjustment)
  • Side with heating/electric drive
  • Salon with auto-dimming
  • There are also mirrors in the visors

Articles and sizes: how to choose a mirror by VIN or visually

To buy a mirror that is guaranteed to fit, use one of three methods:

  1. By VIN code - the most reliable method. Enter VIN on websites ล koda Original Parts or ETKAto get the exact item number.
  2. By catalog number - if you know the article number of the old mirror (written on the back or in the documentation).
  3. Visually โ€” compare the shape, dimensions and fastenings (suitable for universal analogues).

Below is a table with article numbers of original mirrors for Fabia 2 (2007โ€“2014):

Mirror type Article (left/right) Note
Lateral (manual adjustment) 5J2857507A / 5J2857508A No heating, black plastic
Side (heated) 5J2857515A / 5J2857516A Suitable for Comfort/Ambition
Lateral (with electric drive + heating) 5J2857521A / 5J2857522A Requires wiring connection
Salon (standard) 5J2857011 Adhesive mount
Salon (auto-dimming) 5J2857011C With light sensor, for Elegance

Dimensions of side mirrors Fabia 2:

  • ๐Ÿ“ Height: 18โ€“20 cm (depending on configuration).
  • ๐Ÿ“ Width: 12โ€“14 cm.
  • ๐Ÿ”„ Radius of curvature: Standard (flat) or aspherical (enlarged view).

Important: mirrors with turn signals have a unique shape - they cannot be replaced with regular ones without modifications!

How to remove the side mirror on Fabia 2: step-by-step instructions

Removing the side mirror Fabia 2 takes 15โ€“30 minutes and does not require special tools. You will need:

  • ๐Ÿ”ง Flathead screwdriver or plastic pick.
  • ๐Ÿ”ง Torx key T20 (for bolt-on mirrors).
  • ๐Ÿ”ง Electrical tape (for marking wires).

Disconnect the negative terminal of the battery|

Clean the area around the mirror from dirt|

Prepare a container for bolts/clips|

Take a photo of the wire connection (if there is heating) -->

Instructions for clip-on mirrors (heated/electric):

  1. Open the door and find plastic plug at the bottom of the mirror (interior side). Pry it off with a screwdriver.
  2. Disconnect power connector (if the mirror is heated). Remember the location of the wires!
  3. Gently pull the mirror on yourself โ€” it is held on by 3-4 plastic clips. Do not use excessive force to avoid breaking the fasteners.
  4. If the clips are still in the door, remove them with tweezers.

Instructions for bolt-on mirrors (manual adjustment):

  1. Remove the inner door trim (unscrew the screws under the handle and near the speaker).
  2. Locate the three mirror mounting bolts (usually under black rubber plug).
  3. Unscrew the bolts with a wrench Torx T20 and remove the mirror.
What to do if the clips are broken?

If the plastic clips are cracked, they can be replaced with universal ones (item no. N 908 132 01 for VAG). Before installing a new mirror, apply to the clips silicone grease - this will make future dismantling easier.

โš ๏ธ Attention: When disconnecting the heating wires, do not pull the wires - they are often soldered to the mirror contacts. It is better to disconnect the entire connector.

Replacing an interior mirror: nuances and mistakes

Interior mirror on Fabia 2 attaches either to adhesive backing (basic versions), or on metal bracket (restyled models). The main difficulty is not to damage the ceiling lining during dismantling.

Instructions for adhesive-based mirrors:

  1. Pry the mirror out from the side with a flat screwdriver (after wrapping it in cloth so as not to scratch the plastic).
  2. Warm up the adhesive base hairdryer (temperature 50โ€“60ยฐC), if the mirror does not budge.
  3. Clean any remaining adhesive from the windshield solvent 646 or white spirit.
  4. Apply new double-sided tape (eg 3M 468MP) and press the mirror for 1โ€“2 minutes.

Instructions for mirrors on bracket:

  1. Remove decorative overlay around the mirror (it is held on by latches).
  2. Unscrew the two bracket mounting bolts with a wrench Torx T25.
  3. Disconnect the power connector (if the mirror has auto-dimming).
  4. Install the new mirror in reverse order.

โš ๏ธ Attention: If after replacement the mirror vibrates on uneven surfaces, check rubber dampers on the bracket. Their absence or wear is a common cause of trembling.

๐Ÿ’ก

Before purchasing a salon mirror with auto-dimming make sure your Fabia 2 equipped with a light sensor (located on the windshield next to the mirror). Without it, the dimming function will not work.

Heated mirrors: how to check and repair

Heated side mirrors Fabia 2 often fails due to oxidation of contacts or breakage of the heating element threads. Check it's working:

  1. Turn on the ignition and press the heating button (usually it is combined with the rear window heating).
  2. Touch the mirror with your hand - if it heats up, the system is working.
  3. If the heating does not work, check fuse F37 (10A) in the block under the steering wheel.

Typical faults and repair methods:

  • ๐Ÿ”Œ Oxidation of contacts - clean the connectors WD-40 or contact lubricant.
  • ๐Ÿงต Broken heating threads - restore with conductive glue (for example, Permatex 21351).
  • ๐Ÿ”‹ Button malfunction โ€” check with a multimeter (resistance should be ~0 Ohm when turned on).

๐Ÿ’ก

Heated mirrors on Fabia 2 only works when the ignition is on. If it refuses to turn on at idle, check the relay J329 in the block under the panel.

Adjusting your mirrors: how to avoid blind spots

Correct adjustment of mirrors Fabia 2 reduces the risk of accidents by 30% (according to IIHS). Follow this technique:

  • ๐Ÿ‘จโ€๐Ÿฆฝ Driver's mirror:
    1. Tilt your head towards the window - the rear pillar should be visible in the mirror.
    2. Return to normal position - the stand should disappear from view.
  • ๐Ÿ‘จโ€๐Ÿฆผ Passenger mirror:
    1. Tilt your head towards the center of the cabin - the rear pillar should appear in the mirror.
    2. Return to the starting position - the stand disappears again.
  • ๐Ÿชž Salon mirror:
    1. Adjust so that the rear window is fully reflected.

For mirrors with aspherical area (convex insert in the corner) make sure that:

  • ๐Ÿ” The driver in the mirror occupied no more than 25% of the area.
  • ๐Ÿš— Cars in adjacent lanes were visible entirely (without clipping).

โš ๏ธ Attention: If blind spots remain after adjustment, check mirror angle โ€” it should be ~15ยฐ outward from the body. Use goniometer or a smartphone application (for example, Angle Meter).

The choice between the original and analogues: which is better for Fabia 2

When purchasing mirrors for Fabia 2 owners are faced with a dilemma: overpay for the original or take a chance with an analogue. Let's look at the pros and cons of each option.

Criterion Original (ล koda/VW) Analogue (for example, HELLA, Bosch)
Price โŒ Expensive (from 8,000 rubles per side) โœ… Cheaper (from 2,500 rubles)
Plastic quality โœ… Resistant to UV rays, does not turn yellow โŒ May crack after 2-3 years
Fit accuracy โœ… Fits perfectly without modifications โš ๏ธ Sometimes requires filing
Warranty โœ… 2 years from official dealers โŒ 6โ€“12 months (depending on seller)

When to choose the original:

  • ๐Ÿ”ง If the mirror is electric drive or heating - analogues often have problems with wiring.
  • ๐ŸŽจ If important perfect color (on some analogues the shade of plastic is different).
  • ๐Ÿ”„ If you plan to sell the car, original parts increase its value.

When the analogue comes up:

  • ๐Ÿ’ฐ Budget is limited (for example, for Fabia 2 aged 10+ years).
  • ๐Ÿ”ง Change the mirror temporarily (before purchasing the original).
  • ๐Ÿ”„ Need a mirror without heating (here the difference with the original is minimal).

๐Ÿ’ก

When purchasing an analogue, pay attention to the country of origin. Mirrors from Poland (Polcar) or Czech Republic (Topran) are often not inferior to the original in quality, while Chinese ones may have backlash.

Frequently asked questions about ล koda Fabia 2 mirrors

Is it possible to install heated mirrors on a base Fabia 2 without heating?

Yes, but the wiring will need to be modified. It is necessary to stretch the wires from fuse box (fuse F37) to the door and install the control button. An alternative is to connect the heating directly to positive wire from the cigarette lighter via a relay.

Why does the new mirror vibrate at speeds above 100 km/h?

There are two reasons: either the fastening has become loose (tighten the bolts or clips), or worn rubber dampers on the bracket (needs to be replaced with new ones, article number 6Q0857537). Also check the wheel balancing - imbalance is often transmitted to the body.

How to remove a mirror with a turn signal without breaking it?

Careful! First disconnect repeater connector (it is located under the plastic cover at the base of the mirror). Then remove the mirror according to the standard procedure. Do not pull on the repeater - its wires are often soldered to the circuit board inside the mirror.

How to clean a tarnished interior mirror?

Use glass polishing paste (for example, 3M Glass Polish) or mixture vinegar and water (1:1). Apply to microfiber and wipe the mirror in a circular motion. For a lasting effect, cover defogger (spray Sonax Anti-Fog).

Where can I buy mirrors for Fabia 2 cheaper?

Optimal options:

  • ๐Ÿ›’ Exist.ru โ€” originals and analogues with a guarantee.
  • ๐Ÿ›’ Emex.ru - there are often discounts on HELLA and Bosch.
  • ๐Ÿ›’ Avito/Yula โ€” used originals from disassembly (check for cracks!).
  • ๐Ÿ›’ AliExpress - only for universal mirrors without electronics.