Owners Skoda Octavia A7 Often faced with the need to replace or upgrade exterior rear view mirrors. This is due both to the natural wear and tear of mechanisms after long-term use, and to the desire to improve the functionality of the car by installing more modern analogues. A properly selected mirror not only ensures safety when maneuvering, but also fits harmoniously into the overall design of the body.
Choosing the right component depends on your machine's configuration. Some versions are equipped with simple mechanical drives, while more expensive modifications have electric drives, heating, folding and even built-in all-round cameras. An incorrect choice may result in new elements not fitting into the mount or not working with the electrical circuit. Skoda Octavia A7.
Types of mirrors for Octavia A7 and their differences
There are several main categories of mirrors on the market that are suitable for this model. First of all, they should be distinguished by the type of control: mechanical, electrically driven and with an automatic folding function. Mechanical options are found on the earliest or basic versions, where adjustment is carried out using a lever from the interior. The electric drive allows you to control the position of the glass using the joystick on the driver's door.
It is also important to take into account the optional functions that can be implemented in the mirror housing. For example, the presence of blind spot lighting, integrated turn signals or a rear view camera. For Skoda Octavia A7 mirrors with the function are especially relevant Auto Folding, which allows you to automatically fold them when arming. This not only saves parking space, but also reduces the risk of damage to the body.
Particular attention should be paid to the case material and the quality of the optics. Mirrors can be in body color, gloss black or matte black. The optics also vary: standard flat glass, aspherical glass for increased visibility, or a mirror with a function Anti-Glare (darkening when blinded by headlights). The choice depends on your needs and budget.
- β‘ Electric adjustment and folding are standard for the Ambition and Style trim levels.
- π₯ Heating glass is a mandatory function for winter operation in cold climates.
- πΉ Rear-view camera β often integrated into the right mirror in versions with Park Assist package.
How to choose the right mirror: OEM vs analogues
When searching for parts, you will come across two main options: original parts (OEM) and quality counterparts. The original mirrors have precise articles, guaranteed build quality and full compatibility with your vehicleβs electronics. For Skoda Octavia A7 Original parts are marked with codes starting at 5E0 or 5E1, depending on the year of production and body type.
Analogs may offer a lower price, but often have nuances like plastic quality, fit accuracy, or electronics performance. Cheap Chinese copies may not have blind spot lighting even when claimed, or the wiring may not match the connectors. Skoda Octavia A7. However, there are proven manufacturers of the secondary market, offering products close to the original in quality.
Always check for all the necessary connectors and features before buying. If you are planning to install a mirror with a camera, make sure that your car has wiring to connect the video signal. Otherwise, you will have to pull the cables yourself, which will require dismantling the entire skin of the door.
How to check compatibility by VIN?
For accurate compatibility check, use the VIN code of the car on specialized parts sites or contact the official dealer. Enter the code, select the Body section -> Rearview Mirrors and compare the image and description with what you plan to buy.
- π Check the article
The original always has a number starting with 5E0. or 5E1...
The process of replacing and connecting mirrors
Replacement of the rear-view mirror with Skoda Octavia A7 A task of medium complexity that can be performed independently with a basic set of tools. The main stage is the careful dismantling of the interior of the door. You will need to remove the plastic lining in the area of the door opening handle, unscrew screws and unfasten clips.
After removing the skin, access to the mirror mounts and an electric connector will open. Unplug the plug, unscrew the three bolts of the mount and remove the old mirror. Be careful not to damage the sealing rubber and not to break the wiring inside the door. Install a new mirror, twist the bolts and plug the connector until a characteristic click.
If you install a mirror with new features that werenβt there before (like folding), you may need to encode the door control unit. Without this, the function may not be activated or not work properly. Use diagnostic equipment to enter the appropriate settings into the system Skoda Octavia A7.
βοΈ Replacement Tools
The assembly is done in reverse order. Make sure all clips of the skin are in place and nothing rattles when the door is shaking. Check the operation of all functions: adjustment, heating, turn-key and folding. If something is not working, check the connector contacts and fuses.
β οΈ Note: Do not use excessive force when removing the skin of the door, as plastic clips on the door Skoda Octavia A7 They are quite fragile and can break.
Common faults and solutions
Rear-view mirrors are subject to various breakdowns. The most common problem is the failure of the adjustment or folding mechanism. This can be caused by wear of the gears inside the motor, a break in the wiring or failure of the control unit itself. If the mirror does not fold, first check the fuse responsible for the electric drive of the doors.
Another common problem is broken glass or clouding of the reflective surface. In this case, you can replace only glass without changing the entire body. However, if the body itself is broken or the levers of the mechanism are bent, a complete replacement of the node will be required. For Skoda Octavia A7 There are separate glasses with heating and without, as well as with function Anti-Glare.
Sometimes there is a contact problem, resulting in the loss of communication between the mirror and the car. This often happens at the inflection point of the wiring in the rubber corrugated between the door and the body. The wires can be rubbed and oxidized. In this case, diagnostics and soldering of contacts or replacement of corrugated wiring is required.
How to check the wiring in the corrugation?
Carefully unwind the rubber corrugated and visually inspect the wires for fractures or oxidation. If necessary, use a multimeter to vertebrate the chain from the door connector to the mirror connector.
Malfunction
Possible reason
Recommended Action
Mirror doesn't fold
Motor or fuse burned out
Replacing the fuse or motor
No glass heating.
Wire break in corrugation
Wiring repair or glass replacement
Adjustment does not work
Wear of gears of gear gear gears
Replacing the adjustment mechanism
The turn signal is flashing
Failure of lamp or diodes
Replacement of the turntable module
Coding and setting up mirror functions
If you have installed a mirror with advanced functionality, for example, with the automatic folding function, it must be encoded in the car system. Without a computer. Skoda Octavia A7 You will not know that the new feature supports this option. The coding process is carried out through the OBD2 diagnostic connector using specialized software.
Programs are often used for coding. VCDS or OBDeleven. In the door control unit (usually block 42 or 52), the corresponding bits in the configuration must be activated. For example, set the "Power Fold" flag to the "Active" position. After saving the settings, the system will restart the drivers, and the function will become available.
It is important to understand that improper coding can lead to errors in the comfort system. If you are not confident in your abilities, it is better to entrust this procedure to professionals. Incorrect settings can cause conflict between control units and disabling other features such as central locking or heating.
VCDS or OBDeleven. In the door control unit (usually block 42 or 52), the corresponding bits in the configuration must be activated. For example, set the "Power Fold" flag to the "Active" position. After saving the settings, the system will restart the drivers, and the function will become available.