Wipers on the Škoda Superb 3: dimensions, part numbers and step-by-step replacement

Škoda Superb 3 - a car that combines premium comfort and practicality. But even such a reliable sedan has consumables that require regular attention. Windshield wipers (or windshield wiper blades) are one of those parts that directly affect your driving safety, especially in rain or snow. Worn brushes leave streaks, squeak and do not clean the glass well, which can lead to an emergency.

In this article we will analyze all the nuances associated with wipers for Superb 3 (2015–2023 model years): from original sizes and part numbers to step-by-step replacement instructions. You will also learn how to extend the life of brushes and which analogues are better to choose if the original seems too expensive. The material will be useful for both beginners and experienced owners who want to save on service and do everything themselves.

Original dimensions and article numbers of wipers for Škoda Superb 3

The first thing you need to know when choosing new brushes is their exact size. On Superb 3 Wipers of different lengths are installed for the driver and passenger sides. This is due to the aerodynamics of the body and the windshield cleaning area. Official data from the manufacturer:

• 🚗 Driver's side (left): 650 mm
• 🚗 Passenger side (right): 400 mm
• 🚗 Rear wiper (for hatchback): 350 mm

Important: on restyled models Superb 3 (2019+) the dimensions remain the same, but the fastenings have changed. If you buy non-original brand brushes, make sure they are compatible with "Hook" type fastening or "Push Button" — it depends on the year of manufacture and configuration.

Original wiper articles from Škoda:

Position	Article	Note
Left brush (650 mm)	3U0 955 425 A	For models up to 2019
Left brush (650 mm)	3U0 955 425 B	For facelift 2019+
Right brush (400 mm)	3U0 955 426 A	Universal for all ages
Rear brush (350 mm)	3U7 955 427	Hatchback only

⚠️ Attention: On some versions Superb 3 with option heating wipers Brushes with an integrated heating element are installed. Their articles differ: 3U0 955 425 C (left) and 3U0 955 426 B (right). Check the package before purchasing!

Which wipers to choose: original or analogues?

Original brushes from Škoda are guaranteed to fit in size and fastening, but their price may seem overpriced - from 2,500 to 4,000 rubles per set. An alternative is analogues from trusted brands, which are often not inferior in quality, but cost 2-3 times cheaper.

The best analogues for Superb 3:

• 🔹 Bosch - series Aerotwin (articles: 3 397 009 540 and 3 397 009 316) with frameless construction and graphite coating.
• 🔹 HELLA - model HydroTwin (8WH 350 065-001 and 8WH 350 040-001), optimized for high speeds.
• 🔹 Valeo - series Silencio X-TRM (608160 and 608140), with reduced noise levels.
• 🔹 Denso — Hybrid Wiper Blade (WI-26H and WI-16H), compatible with the heating system.

When choosing analogues, pay attention to:

1. Mounting type - must match the original (Hook 9x3 or Push Button).
2. Availability winter version (if you operate the car in a cold climate).
3. Rubber material - brushes with graphite or teflon coating for durability.

When to change wipers on a Škoda Superb 3: signs of wear

The manufacturer recommends replacing windshield wiper blades every 6–12 months, but in practice the service life depends on the intensity of use and operating conditions. In Russia, where the weather is changeable and there is a lot of sand and reagents on the roads, wipers can wear out faster.

Signs that it’s time to change your brushes:

• 🌧️ Stains on glass — even after several passes, streaks remain.
• 🔊 Creaking or knocking during operation - indicates wear of the rubber or deformation of the frame.
• 👓 Poor fit — the brush “lags behind” the glass at high speeds.
• 🧊 Ice on rubber in winter - if the wipers freeze to the glass, their elasticity is lost.
• 🔍 Cracks or tears on the rubber part - visible upon closer inspection.

⚠️ Attention: If there are microcracks from the work of worn-out wipers, they can no longer be eliminated by polishing. The windshield will need to be replaced, which will cost 15,000–30,000 rubles. Check the condition of the brushes regularly!

To extend the life of your wipers, follow these simple rules:

Step-by-step instructions for replacing wipers on Superb 3

Replacing windshield wiper blades with Škoda Superb 3 - a simple procedure that will take no more than 10 minutes. You don't need tools, just new brushes and a little skill. The main thing is not to use excessive force so as not to damage the wiper mechanism.

Instructions for front wipers:

1. Raise the wiper to a vertical position (perpendicular to the glass). Be careful - the spring in the mechanism is tight!
2. Click on fastening clamp (usually a button or latch on the back of the brush).
3. Slide the brush down to remove it from the hook. If the mount type Push Button, pull the brush towards you.
4. Install the new blade by aligning the mount with the wiper hook. You should hear a click.
5. Lower the wiper back onto the glass and check operation.

For the rear wiper (on a hatchback) the process is similar, but the mounting may be different - often used side lock instead of a button.

What to do if the wiper is not removable?

If the latch does not press or the brush is stuck, do not pull it by force. Spray the mount with WD-40 or silicone lubricant, wait 5 minutes and try again. If it doesn’t help, the plastic adapter may have become deformed (the entire wiper arm needs to be replaced).

Video instructions (if visualization is needed):

There are many videos on YouTube on how to replace windshield wipers Superb 3. For example, search for: Škoda Superb 3 wiper blade replacement. Pay attention to the year of manufacture of the car - fastenings may differ.

Frequent problems with wipers on Superb 3 and their solutions

Even new brushes may not work correctly. Let's look at typical problems and how to fix them:

Problem	Possible reason	Solution
Wipers "bounce" at high speed	Worn lever spring or incorrect brush size	Check size compatibility; replace the lever if the spring is weakened
Brushes leave streaks after rain	Glass contamination or rubber wear	Clean the glass wax remover; replace brushes
Wipers do not return to their original position	Motor or gearbox malfunction	Diagnostics in the service; it is possible to replace the motor (3U2 955 119)
Creak when working	Sand or dirt between glass and brush	Wash the brushes with soapy water; check fit

Critical fault: If the wipers suddenly stop working altogether, check fuse F37 (10A) in the block under the steering wheel. Its burnout is often associated with a jammed mechanism or a short circuit in the motor.

Heated wipers: features and malfunctions

Many configurations Škoda Superb 3 equipped with a heating system for wipers. It prevents the brushes from icing up in winter and improves glass cleaning at low temperatures. However, this module can also fail.

How heating works:

• 🔥 Heating elements are built into the base of the brushes.
• 🔥 Activates automatically at temperatures below +4°C and the wipers are on.
• 🔥 Consumes ~10–15 W of energy without loading the generator.

Signs of malfunction:

• ❄️ The wipers freeze up even when the heating is on.
• 🚨 Lights up on the dashboard ESP or Check Wiper Heater (on models with display Virtual Cockpit).
• 🔌 Fuse F42 (15A) regularly blows.

To diagnose heating you will need:

1. Checking the fuse and relay J317 (block under the hood).
2. Measuring the resistance of heating elements (should be ~1–2 Ohms).
3. Checking the power supply at the brush connector (voltage ~12V when the heating is on).

⚠️ Attention: If you notice that the plastic parts of the heated brushes have melted, immediately turn off the system (by removing the fuse) and replace the brushes. Melting indicates a short circuit, which can lead to a fire!

FAQ: answers to frequently asked questions about Superb 3 wipers

Is it possible to install wipers longer than the original ones?

No, this will disrupt aerodynamics and may lead to brush tearing off at high speed. The maximum permissible deviation is ±10 mm (for example, 660 mm instead of 650 mm), but it is better to stick to the factory dimensions.

Why do new wipers squeak?

Creaking can occur due to:

• 🧴 Dry glass - process it anti-rain.
• 🧤 Incorrect installation — check whether the mount is properly latched.
• 🏗️ Rubber defect — return the brushes under warranty.

How to remove the wiper arm for replacement?

To do this:

1. Remove the protective cap on the lever shaft.
2. Unscrew the nut on 13 mm (a socket with an extension will be required).
3. Carefully remove the lever by rocking it from side to side.

⚠️ Do not force it - if the lever does not come off, the nut may not be completely unscrewed.

Is it possible to restore old wipers?

Partially yes. To do this:

• Rinse the brushes in warm soapy water.
• Treat the rubber silicone grease or glycerin.
• Clean metal parts from corrosion.

But remember: reconditioned brushes will not last long (1-2 months).

Where can I buy wipers for Superb 3 cheaper?

Optimal options:

• 🛒 Exist.ru or Autodoc — there are often discounts up to 30%.
• 🏢 Official Škoda dealers - original on sale.
• 🌍 AliExpress - cheap analogues (but check the reviews!).

Compare prices including delivery - sometimes it's cheaper to order from a local store.